Moturo carburetor repair kit suitable for Honda CB500F

Moturo Carburetor Repair Kit for Honda CB500F from '13

The Moturo carburetor repair kit for your Honda CB500F (MY '13 onwards) — wear parts for thorough carburetor maintenance after high mileage. Jets, jet needle, float needle valve, and gaskets, ready for installation.

The repair kit replaces the typical wear parts and seals on the CB500F carburetor. Jets and jet needle correct mixture deviations after high mileage, the float needle valve seals the float chamber and prevents overflowing, and the O-rings prevent false air in the carburetor bowls and connections.

Replace during a workshop session using carburetor tools, a screwdriver set, and cleaning gasoline. Open the carburetor cover, remove the jets and float, swap out the wear parts for the new components, reassemble everything cleanly, and check the synchronization.

Repair kit for your CB500F, made by Moturo.

Performance · Material · Specs

• Jets and jet needle for CB500F carburetor tuning
• Float needle valve seals the float chamber and keeps the float level stable
• O-rings and gaskets prevent false air in the carburetor bowl
• Component quality matches original spare parts

Important notes – please read

Original spare part design, no separate ABE (general operating permit) required. The carburetor configuration of the CB500F (model year 2013 onwards) differs from older CB 500 models — repair kit not suitable for CB 500 models before 2013. Compare the jetting with your carburetor before installation.

Tools & Time Required

• Carburetor tools
• Screwdriver set in standard sizes
• Torque wrench
• Cleaning gasoline and clean rags
• About one hour for an experienced mechanic

Scope of delivery

1 × Carburetor repair kit with O-rings, float needle valve, jets, jet needle, and other small parts (ready to install). Not included: tools, cleaning gasoline, carburetor housing.

Frequently Asked Questions

Does the repair kit fit the CB 500 Twin (PC32, model years 1994 to 2003)?
No, the carburetor configuration is different. This kit is for the CB500F from model year 2013 onwards.

Do I need TÜV registration for the replacement?
No. Original spare part design.

Are all jet sizes identical to the original?
Compare the jetting with your carburetor before installation; jet sizes and needle position must match your bike's configuration.