Moturo 6002RS 32mm x 15mm x 9mm Ball Bearing for Pocket Bike

Moturo 6002RS Deep Groove Ball Bearing 15x32x9 mm for Pocket Bike

The Moturo 6002RS deep groove ball bearing for your pocket bike — a standard ISO-design bearing used in wheel hubs, axles, and shafts. 15 mm inner diameter, 32 mm outer diameter, 9 mm width, ready for installation.

The bearing runs on a 15 mm thick shaft and sits in a 32 mm bearing seat. The overall height is 9 mm, and the seal consists of rubber caps on both sides (2RS design). The bearing races are made of steel.

The 6002RS is a standard ISO-design bearing used in many pocket bike applications — wheel hubs, axles, and drive assembly bearing points. The dimensions are standardized; the hole pattern is identical regardless of the manufacturer.

Replacement takes about half an hour using a bearing puller and a suitable installation sleeve.

Deep groove ball bearing 6002RS for your pocket bike, made by Moturo.

Performance · Material · Figures

• Inner diameter 15 mm, outer diameter 32 mm, width 9 mm
• 2RS design — sealed on both sides with rubber caps
• Bearing races made of steel, seals made of rubber
• Standard ISO 6002 bearing

Important notes – please read

Original spare part design, no separate ABE (general operating permit) required. The 6002RS is not identical in construction to the 6201, 6202, or 6203 — dimensions differ due to design. Compare the inner diameter, outer diameter, and width with your old bearing before ordering.

Tools & Time required

• Bearing puller
• Suitable installation sleeve or socket as an installation aid
• About half an hour for an experienced mechanic

Scope of delivery

1 × deep groove ball bearing 6002RS (15 × 32 × 9 mm). Not included: bearing puller, installation sleeve, tools.

Frequently Asked Questions

Is the 6002RS identical to the 6002-2RS?
Yes. 2RS and RS refer to the same design with rubber seals on both sides.

What does the 2RS designation mean?
2RS stands for two rubber seals attached to the sides, which protect the bearing from dirt and moisture.

Does the bearing fit in applications other than pocket bikes?
Yes, anywhere an ISO-standard 6002RS is installed. Compare the dimensions of your old bearing before ordering.