Moturo chain 49 links reinforced (420) for dirt bike

Moturo Drive Chain 420 reinforced 49 links for Dirt Bike

The Moturo Type 420 drive chain for your dirt bike — a wear part to be installed after a snapped chain or elongated links. 49 links, 1250 mm length, ready for installation.

The chain transfers the drive power from the drive sprocket to the sprocket on the rear wheel. Reinforced Type 420 design with 49 links, total length 1250 mm. Supplied with a rivet link for secure closure on the bike.

Replacement takes about an hour using a chain riveting tool, socket set, and torque wrench. Check chain alignment and sprocket alignment before installation.

Drive chain for your dirt bike, made by Moturo.

Performance · Material · Specs

• Chain type 420, reinforced version
• 49 links, total length 1250 mm
• Supplied with rivet link for closure on the bike
• Universal item for common dirt bike drives with 420 pitch

Important notes – please read

Drive and wear part; replacement does not require registration. Before ordering, compare the chain type (420), required number of links, and existing link pattern with the product image — the number of links for pit bikes and dirt bikes varies depending on the platform.

Tools & time required

• Chain riveting tool for 420 chains
• Socket set for rear axle and chain tensioner
• Torque wrench
• About one hour for an experienced mechanic

Scope of delivery

1 × Drive chain 420, 49 links, 1250 mm. 1 × Rivet link. Not included: tools, chain spray, sprocket, chain wheel.

Frequently asked questions

Can I shorten the chain if my bike needs fewer links?
Yes, excess links can be removed with a chain riveting tool. The included rivet link is retained for closure.

Does the chain also fit 428 or 520 drives?
No, 420 pitch is not compatible with 428 or 520. Sprocket and chain wheel must match the chain type.

Does this drive part need to be registered?
No. Chain and drive parts are standard wear parts; it is important that the pitch, dimensions, and installation are correct.