Moturo drive belt 842-20-30 for GY6

Moturo Drive Belt V-Belt 842-20-30 for GY6 125-150 cc

The Moturo 842-20-30 drive belt for your GY6 scooter (125 to 150 cc) — a wear part in the variator housing that is replaced periodically based on mileage. 842 mm length, 20 mm width, ready for installation.

The belt runs between the variator and the clutch bell, transmitting drive power. The dimensions follow the GY6 standard: 842 mm in length and 20 mm in width, suitable for common 125cc and 150cc GY6 powertrains.

Replacement takes about half an hour with a hex key set, socket wrench set, and a variator holding tool.

Drive belt for your GY6 scooter, made by Moturo.

Performance · Material · Specs

• Length 842 mm, width 20 mm
• Dimensions according to GY6 standard for 125 to 150 cc powertrains
• Universal part for common GY6 scooters
• Wear part, periodic replacement required based on mileage

Important Notes – please read

Original equipment replacement part design, no separate type approval (ABE) required. Please verify the dimensions of your old belt (length × width × thickness) against 842 × 20 mm before ordering — the GY6 platform uses several belt sizes depending on the powertrain generation.

Tools & Time required

• Hex key set in common sizes
• Socket wrench set for the variator nut
• Variator holding tool for counter-holding
• Approximately half an hour for an experienced mechanic

Scope of delivery

1 × drive belt 842-20-30 (842 × 20 mm). Not included: variator rollers, sliders, tools.

Frequently Asked Questions

Does the belt fit every GY6 125/150?
Only if your old belt has the dimensions 842 × 20 mm. GY6 powertrains come in several belt lengths — please compare before ordering.

When is a belt replacement due?
According to your scooter manufacturer's specifications, or at the latest when visible cracks, frayed edges, or elongation beyond the wear limit are present.

Do I need a road-legal registration?
No. It is a wear part designed to match original replacement specifications.