Moturo Ignition Coil Kit for Yamaha PW 50

Moturo ignition coil kit for Yamaha PW 50 88-06

The Moturo ignition coil kit for your Yamaha PW 50 88-06 and PW 80 96-03 — no spark at the plug is the most common ignition diagnosis for two-strokes. Mounting distance 60 mm, ignition cable 360 mm, ready to install.

The kit supplies the high voltage for the spark plug. The ignition coil and cable are mounted on the frame, and the connector snaps onto the plug at a 90° angle. The mounting hole distance is 60 mm from center to center, ignition cable is 360 mm — according to the product description, it is of OEM quality, with form and function corresponding to the original part.

Suitable according to the product description for Yamaha PW 50 model years 1988 to 2006 as well as Yamaha PW 80 model years 1996 to 2003.

Replacement takes about half an hour with a hex key set and a socket wrench for the mounting nut.

Ignition coil kit for the PW 50, made by Moturo.

Performance · Material · Specs

• Mounting hole distance 60 mm center to center
• Ignition cable 360 mm length
• Spark plug connector 90° angled
• OEM quality according to product description, form and function correspond to the original part

Important notes – please read

Original spare part design, no separate ABE (general operating permit) required. Not suitable for other models outside the Yamaha fitments specified above. Compare dimensions, hole pattern, and connector geometry with the original ignition coil before ordering.

Tools & Time required

• Hex key set in common sizes
• Socket wrench for the mounting nut
• About half an hour for an experienced mechanic

Scope of delivery

1 × ignition coil with ignition cable (360 mm) and spark plug connector (90° angled). Not included: spark plug, mounting screws, tools.

Frequently asked questions

Does the kit also fit the PW 80?
Yes, according to the product description, for Yamaha PW 50 model years 1988 to 2006 and Yamaha PW 80 model years 1996 to 2003.

Do I need a TÜV registration?
No. Original spare part design, no separate ABE required.

Which spark plug fits the connector?
The connector is 90° angled and corresponds to the original design of the PW 50. Select the spark plug according to the PW 50 workshop manual.