Moturo clutch cable suitable for Honda XL 200

Moturo clutch cable for Honda XL 200, XR 200, CB 125 and ATC 200

The Moturo clutch cable for Honda XL 200, XR 200, CB 125 and ATC 200 (MY 72-82) — a wear part to be replaced in case of breakage or a dragging clutch. Original dimensions, ready to install.

The cable transmits the pressure from the clutch lever to the clutch mechanism. The housing, inner wire, and end pieces correspond to the dimensions of the original cable. The end sleeves fit the factory mounting points of the listed models. OEM quality according to the manufacturer's description, precisely manufactured and neatly finished.

Typical reasons for replacement: snapped inner wire, dragging clutch, or stiff operation after years of use. Can be replaced in about half an hour with an open-ended wrench and some cable lubricant; remember to check the lever free play afterwards.

Clutch cable for Honda XL 200, manufactured by Moturo.

Performance · Material · Specifications

• Dimensions according to the original cable of the listed Honda models
• Housing, inner wire, and end pieces pre-assembled and ready to install
• Suitable for Honda XL 200, XR 200, CB 125, ATC 200 as well as XL 125 and XL 185
• OEM quality according to the manufacturer's description

Important notes – please read

Original replacement part design, no separate ABE (general operating permit) required. Honda used several cable variants between 1972 and 1982. Before ordering, compare the housing length and the shape of the end pieces with your original cable and the photo on the product page.

Tools & time required

• Open-ended wrench for the lock nut on the clutch lever
• Cable lubricant or spray grease for initial lubrication
• About half an hour for an experienced mechanic

Scope of delivery

1 × clutch cable (ready to install). Not included: tools, cable lubricant, small mounting hardware.

Frequently asked questions

Does the cable fit the XL 200 R from model year 1984 onwards?
Later models sometimes have different housing lengths. Compare with the original cable before ordering.

Do I need a TÜV registration?
No. Original replacement part design with the dimensions of the original cable.

Does the cable need to be lubricated before installation?
Recommended. Apply some cable lubricant into the housing so that the cable operates smoothly from the start.