Moturo engine cover right for Suzuki GSX-R 600 750 08-10

Moturo engine cover right for Suzuki GSX-R 600/750 08-10

The Moturo engine cover right for your Suzuki GSX-R 600/750 08-10 (K8, K9, L0) — the most common damage on the clutch side after a fall. OE hole pattern and original sealing surface geometry, ready for installation.

The right engine cover seals the clutch side and protects the clutch and flywheel from stone chips and crash damage. The holes follow the OE hole pattern from model years 2008 to 2010, and the sealing surface geometry corresponds to the original cover. Tightening torques and the tightening sequence for the bolts should follow the workshop manual for K8 to L0 models.

Replacement takes about an hour using a hex key set, a torque wrench, and a new engine cover gasket. Degrease the sealing surface before installation and tighten the bolts in a cross pattern.

Engine cover for the GSX-R 600/750, made by Moturo.

Performance · Material · Facts

• OE hole pattern of the GSX-R 600/750 K8 to L0
• Seals the clutch side and protects the clutch and flywheel
• Tightening torques according to the GSX-R K8 to L0 workshop manual

Important information – please read

Original spare part design, no separate ABE (general operating permit) required. Replacing the engine cover does not require registration.

Tools & Time required

• Hex key set in standard sizes
• Torque wrench
• New engine cover gasket
• About an hour for an experienced mechanic

Scope of delivery

1 × engine cover right (ready for assembly). Not included: engine cover gasket, bolts, tools.

Frequently asked questions

Does the cover fit the GSX-R 600/750 from 2011 onwards (L1)?
No, the hole and sealing surface geometry is different.

Do I need a TÜV registration?
No. Original spare part design, replacement does not require registration.

Is a new gasket mandatory?
Yes, install with a new engine cover gasket, degrease the sealing surface, and tighten the bolts in a cross pattern.