Moturo Brake Cable 880mm for 150cc to 250cc ATV Quad

Moturo Brake Cable 880 mm for ATV/Quad 150-250 cc

The Moturo 880 mm brake cable for your 150-250 cc ATV/Quad — after extended operation, this is the most common wear part on the drum brake. Includes housing and solder nipple, ready for installation.

The brake cable transmits hand force from the brake lever on the handlebar to the rear drum brake. According to the description, the cable length is approximately 880 mm, and the cable comes with a housing and solder nipple. Suitable for ATVs and quads with 150 to 250 cc.

Before installation, detach the old cable, insert the new one, and fit the solder nipple into the brake lever. Then, adjust the play using the adjuster ring. Replacement takes about half an hour with a hex key set and a socket wrench for the fastening nut.

Brake cable for ATV/Quad, manufactured by Moturo.

Performance · Material · Specs

• Cable length approx. 880 mm according to description
• Includes housing and solder nipple
• Suitable for ATVs and quads with 150 to 250 cc engine displacement
• Universal part, compare dimensions before installation

Important Notes – please read

Registration-free replacement/wear part; no entry in vehicle documents required for replacement. Universal part — compare the length and nipple shape with the original brake cable of your ATV/Quad before ordering.

Tools & Time Required

• Hex key set in standard sizes
• Socket wrench for the fastening nut
• About half an hour for an experienced mechanic

Scope of Delivery

1 × Brake cable 880 mm with housing and solder nipple. Not included: tools, adjuster ring, brake lever.

Frequently Asked Questions

What is the length of the brake cable?
According to the description, about 880 mm. Compare with the old cable of your ATV/Quad before ordering.

Does this cable fit every quad with 150 to 250 cc?
It is a universal part. Compare the length and nipple shape with your original brake cable before ordering.

Does the component need to be registered?
No. This replacement/wear part does not require registration; what matters are the correct dimensions, design, and proper installation.