{"title":"Brakes","description":"\u003cp\u003eBrake calipers, brake pumps, brake cylinders, brake levers, brake cables, brake pads, drum brake parts and complete braking systems.\u003c\/p\u003e","products":[{"product_id":"moturo-6235138","title":"Moturo front left brake caliper for Kymco 50-125cc","description":"\u003ch2\u003eMoturo front left two-piston brake caliper for Kymco scooters 50 to 125 cc\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo front left brake caliper for your Kymco scooter (50 to 125 cc, model years 97-05) — fixed caliper with two pistons, ready for installation with matching brake pads included in the scope of delivery.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brake caliper is located on the front left of the fork and uses two pistons to press the brake pads against the brake disc. The mounting geometry follows the Kymco original; please refer to the workshop manual for your specific model for the torque specifications. Matching brake pads are already included with the caliper.\u003c\/p\u003e\n\u003cp\u003eInstallation takes about an hour with a hex key set, ring wrench, and torque wrench. Loosen the brake line, remove the old caliper, attach the new caliper to the fork, tighten to the specified torque, connect the brake line, bleed the brake — done.\u003c\/p\u003e\n\u003cp\u003eBrake caliper for your Kymco scooter, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eTwo-piston fixed caliper, front left position\u003c\/li\u003e\n\n\u003cli\u003eOE bolt pattern for the Kymco mount\u003c\/li\u003e\n\n\u003cli\u003eTorque specifications as per the workshop manual for the specific model\u003c\/li\u003e\n\n\u003cli\u003eMatching brake pads already included\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal equipment replacement type, no separate ABE (general operating permit) required. Before purchasing, please compare the position (front left), mounting dimensions, and bolt pattern with the photo on the product page, as Kymco used several different caliper variants during the 1997 to 2005 production period.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in standard sizes\u003c\/li\u003e\n\n\u003cli\u003eRing wrench for the brake line\u003c\/li\u003e\n\n\u003cli\u003eTorque wrench\u003c\/li\u003e\n\n\u003cli\u003eBrake cleaner and compatible brake fluid for bleeding\u003c\/li\u003e\n\n\u003cli\u003eAbout one hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × front left brake caliper incl. two matching brake pads (ready for installation). Not included: brake line, brake fluid, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this caliper also fit on the front right?\u003c\/strong\u003e\u003cbr\u003eNo, this is the left-hand version. There is a separate item for the right side.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the brake pads really included?\u003c\/strong\u003e\u003cbr\u003eYes, two matching brake pads are already included with the caliper and are ready for immediate installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. As an original equipment replacement part, the replacement does not require registration.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo front left brake caliper for Kymco scooters (50 to 125 cc, model years 1997 to 2005). Two-piston fixed caliper, OE bolt pattern, ready for installation including matching brake pads.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60709361189198,"sku":"6235138","price":39.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremssattel-vorne-links-fuer-Kymco-1_2fa24115-b7bc-457f-97dc-85ba2c300790.jpg?v=1788885757"},{"product_id":"moturo-6235140","title":"Moturo handbrake lever with front brake cylinder","description":"\u003ch2\u003eMoturo front brake master cylinder with lever and brake light switch for 50cc scooters\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo front brake master cylinder set for 50cc scooters and mopeds with 22mm handlebars — the most common replacement part for the handlebar after a fall or seal failure. Includes brake lever and brake light switch, without mirror mount, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brake master cylinder houses the brake lever and the master cylinder for the front brake. It is clamped to 22mm handlebars with two screws; the brake light switch is integrated and activates the brake light when the lever is pulled. There is no mirror mount on the housing in case your scooter has the mirror mounted separately on the handlebar. You connect the brake line using a banjo bolt and sealing rings.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with a hex key set, open-end wrench, and brake fluid for bleeding.\u003c\/p\u003e\n\u003cp\u003eBrake master cylinder for 50cc scooters, manufactured by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e22mm handlebar mount, clamped with two screws\u003c\/li\u003e\n\n\u003cli\u003eIntegrated brake light switch, activates when the lever is pulled\u003c\/li\u003e\n\n\u003cli\u003eWithout mirror mount — mirror is mounted separately on the handlebar\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (general operating permit) required. Bleed the brake system before use and check brake pressure with the vehicle stationary.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in standard sizes\u003c\/li\u003e\n\n\u003cli\u003eOpen-end wrench for the banjo bolt\u003c\/li\u003e\n\n\u003cli\u003eBrake fluid for bleeding as per workshop manual\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour including bleeding\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × front brake master cylinder with brake lever, master cylinder, and brake light switch, ready for assembly. Not included: brake line, banjo bolt, sealing rings, brake fluid, mirror, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the master cylinder fit my handlebars?\u003c\/strong\u003e\u003cbr\u003eThe clamp is designed for a 22mm handlebar diameter — the standard size for 50cc scooters and mopeds. It will not fit thicker handlebars such as 25.4mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a mirror mount included?\u003c\/strong\u003e\u003cbr\u003eNo, the housing does not have a thread for a mirror. If your scooter previously had the mirror mounted on the master cylinder, you will need a separate mirror clamp for the handlebar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich brake line fits?\u003c\/strong\u003e\u003cbr\u003eA standard brake line with a banjo bolt connection. The banjo bolt and sealing rings are not included; please compare your old part with the product image before ordering.\u003c\/p\u003e\n\u003cspan\u003eMoturo front brake master cylinder for 50cc scooters and mopeds with 22mm handlebars. With brake lever, master cylinder, and brake light switch, without mirror mount. Original spare part design, ready for installation.\u003c\/span\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo front brake master cylinder for 50cc scooters and mopeds with 22mm handlebars. With brake lever, master cylinder, and brake light switch, without mirror mount, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60709361221966,"sku":"6235140","price":25.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/6235140-Moturo-Handbremshebel_f3a200f9-fbbd-4a6f-955e-0b7792ccccec.jpg?v=1788885757"},{"product_id":"moturo-6235182","title":"Moturo throttle grip holder right with brake lever for Yamaha PW 50","description":"\u003ch2\u003eMoturo Throttle Housing Right with Brake Lever for Yamaha PW 50 82-13\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo throttle housing right with brake lever for the Yamaha PW 50, PeeWee 50 Y-Zinger (MY 82-13) — the standard replacement part for crash damage or worn levers. Complete assembly with ignition switch and aluminum levers, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe right handlebar assembly holds the throttle grip, the brake lever, and the ignition switch with ON, OFF, and Start. The mount fits the handlebars of the PW 50, PeeWee 50, and Y-Zinger, with a production range from 1982 to 2013. The aluminum levers replace the original ones on both the left and right sides.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with an Allen key set, a Phillips screwdriver, and pliers for the clamp.\u003c\/p\u003e\n\u003cp\u003eThrottle housing for the PW 50, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Facts\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eRight handlebar assembly with throttle, brake lever, and ignition switch (ON, OFF, Start)\u003c\/li\u003e\n\n\u003cli\u003eAluminum levers for left and right side\u003c\/li\u003e\n\n\u003cli\u003eFits Yamaha PW 50, PeeWee 50, and Y-Zinger, model years 1982 to 2013\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes – Please Read\u003c\/h3\u003e\n\u003cp\u003eOriginal replacement part design, no separate ABE (German operating permit) required. Before ordering, please compare the clamp diameter on the handlebar and the switch output with the product image. Not suitable for the PW 80 due to different assembly geometry.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eAllen key set in common sizes\u003c\/li\u003e\n\n\u003cli\u003ePhillips screwdriver\u003c\/li\u003e\n\n\u003cli\u003ePliers for the clamp\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of Delivery\u003c\/h3\u003e\n\u003cp\u003e1 × Handlebar assembly right with ignition switch (black), 1 × brake lever right made of aluminum, 1 × brake lever left made of aluminum. Not included: throttle cable, brake cable, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the set also fit the Yamaha PW 80?\u003c\/strong\u003e\u003cbr\u003eNo, it has a different assembly geometry and a different handlebar cross-section.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need an ABE or a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original replacement part design; the replacement does not require registration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre both brake levers included in the delivery?\u003c\/strong\u003e\u003cbr\u003eYes, one right brake lever and one left brake lever, both made of aluminum.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo throttle housing right with brake lever for Yamaha PW 50, PeeWee 50 Y-Zinger (model years 1982 to 2013). Handlebar assembly with throttle, brake lever, and ignition switch, aluminum levers for left and right, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60709361484110,"sku":"6235182","price":34.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Gasgriffhalter-rechts-mit-Bremshebel-fuer_f8b3ddea-c565-4a36-bca2-bf591ef89483.jpg?v=1788885760"},{"product_id":"moturo-6235378","title":"Moturo drum brake left and right for 150cc to 250cc ATV Quad","description":"\u003ch2\u003eMoturo drum brake set left and right for ATV and quad 150 to 250 cc\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo drum brake set for the left and right side of your 150 to 250 cc ATV or quad — complete with anchor plates, bearings, and brake pads. 110 mm bolt pattern, 17 mm inner diameter, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese two drum brakes replace the factory components on the front or rear of your ATV or quad. You will receive a complete pair for the left and right side, including anchor plates, wheel bearings, and brake shoes. The bolt pattern for the wheel studs is 110 mm, and the inner diameter is 17 mm. Universal dimensions for machines with 150 to 250 cc displacement.\u003c\/p\u003e\n\u003cp\u003eInstallation takes about half an hour per side using a hex key set, socket wrench set, and torque wrench. Before installation, please check the bolt pattern and inner diameter on your own quad.\u003c\/p\u003e\n\u003cp\u003eDrum brakes for your ATV or quad, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eWheel stud bolt pattern 110 mm\u003c\/li\u003e\n\n\u003cli\u003eInner diameter 17 mm\u003c\/li\u003e\n\n\u003cli\u003eComplete with anchor plates, bearings, and brake shoes\u003c\/li\u003e\n\n\u003cli\u003eUniversal dimensions for ATVs and quads with 150 to 250 cc displacement\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eComponent for race and off-road use. No ABE\/StVZO approval. Not for use on public roads. Before ordering, please check the bolt pattern (110 mm) and inner diameter (17 mm) on your vehicle.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in common sizes\u003c\/li\u003e\n\n\u003cli\u003eSocket wrench set for the mounting nuts\u003c\/li\u003e\n\n\u003cli\u003eTorque wrench\u003c\/li\u003e\n\n\u003cli\u003eApproximately half an hour per side\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e2 × drum brake (left and right) complete with anchor plate, bearing, and brake pads. Not included: wheel studs, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDo the drums fit every ATV or quad with 150 to 250 cc?\u003c\/strong\u003e\u003cbr\u003eBefore ordering, please measure the 110 mm bolt pattern and 17 mm inner diameter on your vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the brake shoes already inside the drum?\u003c\/strong\u003e\u003cbr\u003eYes, the set is complete with anchor plate, bearing, and brake pads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAm I allowed to ride with this set on public roads?\u003c\/strong\u003e\u003cbr\u003eNo, the item is not road-legal. Use only off public roads.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo drum brake set left and right for ATV and quad with 150 to 250 cc displacement. Wheel stud bolt pattern 110 mm, inner diameter 17 mm, complete with anchor plates, bearings, and brake shoes. No road approval, for race and off-road use only.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60709361516878,"sku":"6235378","price":49.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Trommelbremse-links-und-rechts-fuer-150ccm_8d444cb4-3402-40ed-8a47-5f949d0126c1.jpg?v=1788885763"},{"product_id":"moturo-6235379","title":"Moturo drum brake left and right for 50cc to 110cc ATV quad","description":"\u003ch2\u003eMoturo drum brake set for ATV\/quad 50-110cc\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo drum brake set for left and right for your ATV\/quad from 50cc to 110cc — universal size for the typical rear axle, complete with anchor plate, wheel bearing, and brake pads. Bolt circle 78mm, inner diameter 18mm, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe drum brake is located on the left and right of the rear axle and slows down the rotating drum via internal pads. The set comes complete with anchor plate, pre-assembled brake pads, and bearing, ready for direct installation onto the axle stub. Bolt circle on the wheel studs 78mm, inner diameter for the axle 18mm. This makes the set compatible with the standard universal dimensions of most children's and youth quads from 50cc to 110cc displacement.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about one hour per side with a socket wrench set and torque wrench.\u003c\/p\u003e\n\u003cp\u003eDrum brake for your ATV\/quad, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBolt circle diameter on the wheel studs 78mm\u003c\/li\u003e\n\n\u003cli\u003eInner diameter for the axle 18mm\u003c\/li\u003e\n\n\u003cli\u003eComplete with anchor plate, wheel bearing, and pre-assembled brake pads\u003c\/li\u003e\n\n\u003cli\u003eUniversal size for ATV\/quads from 50cc to 110cc\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eComponent for racing and off-road use. No ABE\/StVZO approval. Not for public road use. Before ordering, check the 78mm bolt circle and 18mm axle diameter against your quad.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSocket wrench set in standard sizes\u003c\/li\u003e\n\n\u003cli\u003eTorque wrench\u003c\/li\u003e\n\n\u003cli\u003eHex key set in standard sizes\u003c\/li\u003e\n\n\u003cli\u003eAbout one hour per side for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e2 × complete drum brake (left and right), each with anchor plate, wheel bearing, and pre-assembled brake pads. Not included: mounting nuts, brake cables, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the set fit every 110cc quad?\u003c\/strong\u003e\u003cbr\u003eBefore ordering, check the 78mm bolt circle and 18mm axle diameter against your quad. If the dimensions differ, the set will not fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the brake pads street legal?\u003c\/strong\u003e\u003cbr\u003eNo, this set is designed exclusively for racing and off-road use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I have to replace the brake cables as well?\u003c\/strong\u003e\u003cbr\u003eNo, the existing cables generally remain. A visual inspection is recommended.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo drum brake set for left and right for ATV\/quad 50cc to 110cc. Universal size for the typical rear axle, complete with anchor plate, wheel bearing, and pre-assembled brake pads. Bolt circle 78mm, inner diameter 18mm, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712811037006,"sku":"6235379","price":59.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Trommelbremse-links-und-rechts-fuer-50ccm.jpg?v=1788885039"},{"product_id":"moturo-6235380","title":"Moturo brake system complete silver 1750mm type 7 for 110cc to 250cc ATV quad","description":"\u003ch2\u003eMoturo complete brake system Type 7 for ATV, Quad and Dirt Bike 110–250 cc\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo brake system Type 7 for your ATV or quad between 110 and 250 cubic centimeters — the common complete set after long-term damage or a fall. 160 mm lever, 1750 mm steel braided line, caliper with pads, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe system consists of a brake lever with housing and brake cylinder, a coated steel braided brake line with a length of 1750 mm, and a brake caliper with pads. The brake lever measures 160 mm, and the complete set weighs around 1200 g. Universal design for ATVs, quads, and dirt bikes between 110 and 250 cubic centimeters.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about an hour with a hex key set, a set of open-end wrenches, and a brake bleeder. Top up the brake fluid after the change and bleed the system properly before checking the pressure point.\u003c\/p\u003e\n\u003cp\u003eBrake system for your ATV or quad, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBrake lever length 160 mm\u003c\/li\u003e\n\n\u003cli\u003eBrake line length 1750 mm in steel braided version, coated\u003c\/li\u003e\n\n\u003cli\u003eTotal weight approx. 1200 g\u003c\/li\u003e\n\n\u003cli\u003eDelivery form: Lever with housing and cylinder, line, caliper with pads\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eComponent for race and off-road use. No ABE\/StVZO approval. Not for use on public roads. Before ordering, compare connections and mounting geometry with the currently installed brake part and the photos on the product page.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in standard sizes\u003c\/li\u003e\n\n\u003cli\u003eSet of open-end wrenches\u003c\/li\u003e\n\n\u003cli\u003eBrake bleeder and suitable brake fluid\u003c\/li\u003e\n\n\u003cli\u003eAbout an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × brake lever with housing and brake cylinder. 1 × coated steel braided brake line, 1750 mm. 1 × brake caliper with pads. Not included: brake fluid, mounting bolts, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the system fit every 125 cc ATV?\u003c\/strong\u003e\u003cbr\u003eUniversal system; compare connection dimensions and mounting geometry with the currently installed brake part before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a registration?\u003c\/strong\u003e\u003cbr\u003eNo. System without road approval, exclusively for race and off-road use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the pads included in the brake caliper?\u003c\/strong\u003e\u003cbr\u003eYes, the caliper is delivered complete with pads.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo brake system Type 7 for ATV, quad and dirt bike between 110 and 250 cubic centimeters. Lever with housing, 1750 mm steel braided brake line, caliper with pads, ready to install. Without road approval.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712811069774,"sku":"6235380","price":59.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremsanlage-kpl-silber-1750mm-Typ-7-fuer-1.jpg?v=1788885039"},{"product_id":"moturo-6235381","title":"Moturo brake system complete black 1450mm type 8 for 110cc to 250cc ATV Quad","description":"\u003ch2\u003eMoturo Type 8 complete brake system for ATV and Quad 110cc to 250cc\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo Type 8 brake system for your ATV or quad with 110cc to 250cc engine displacement — the complete braking distance from the lever to the brake caliper. 1450mm steel-flex line and 160mm brake lever, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe set includes the brake lever with assembly and master cylinder, the sheathed steel-flex line with a length of 1450mm, and the brake caliper with pads. The lever measures 160mm. The line is sheathed and transmits the pressure point directly from the master cylinder to the caliper. Type 8 is designed for 110cc to 250cc engine displacement in ATVs and quads; compare length and connections before installation on the bike.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about an hour with a hex key set, open-end wrenches, and brake fluid for filling and bleeding the system.\u003c\/p\u003e\n\u003cp\u003eBrake system for your ATV or quad, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e160mm brake lever with assembly and master cylinder\u003c\/li\u003e\n\n\u003cli\u003eSheathed steel-flex line, 1450mm in length\u003c\/li\u003e\n\n\u003cli\u003eBrake caliper with brake pads\u003c\/li\u003e\n\n\u003cli\u003eType 8 design for ATVs and quads with 110cc to 250cc engine displacement\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eComponent for race and off-road use. No ABE\/StVZO approval. Not for use on public roads. Universal item — verify mounts, connecting threads, and line length on your own vehicle before ordering.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in common sizes\u003c\/li\u003e\n\n\u003cli\u003eOpen-end wrenches in common sizes\u003c\/li\u003e\n\n\u003cli\u003eBrake fluid for filling and collection container for bleeding\u003c\/li\u003e\n\n\u003cli\u003eTorque wrench\u003c\/li\u003e\n\n\u003cli\u003eApproximately one hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × brake lever with assembly and brake cylinder (160mm), 1 × sheathed steel-flex brake line (1450mm), 1 × brake caliper with brake pads. Not included: brake fluid, mounting bolts, tools.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the system fit my 50cc quad?\u003c\/strong\u003e\u003cbr\u003eNo. Type 8 is designed for 110cc to 250cc engine displacement; for smaller machines, mounts and design differ.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs registration possible?\u003c\/strong\u003e\u003cbr\u003eNo. Component without ABE\/StVZO, designed for race and off-road use. Not for use on public roads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich brake fluid should I use?\u003c\/strong\u003e\u003cbr\u003eBrake fluid as specified by your vehicle; check the workshop manual of your ATV or quad before filling.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo Type 8 complete brake system with 1450mm steel-flex line, 160mm brake lever with assembly and brake caliper with pads for ATVs and quads with 110cc to 250cc engine displacement. Designed for race and off-road, without StVZO approval.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712811200846,"sku":"6235381","price":49.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremsanlage-kpl-schwarz-1450mm-Typ-8-fue_1.jpg?v=1788885046"},{"product_id":"moturo-6235384","title":"Moturo brake system cpl. black 1350mm type 5 for 110cc to 250cc ATV Quad","description":"\u003ch2\u003eMoturo complete brake system for ATV\/quad 110 to 250 cc\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo complete brake system for your 110 to 250 cc ATV\/quad — the most common replacement for the hydraulic brake system following a crash or wear. Brake lever with master cylinder, 1350 mm braided steel line, caliper with pads, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe system delivers hydraulic pressure from the handlebar assembly to the brake disc on the axle of your ATV\/quad. The 160 mm brake lever carries the integrated fitting and master cylinder on the handlebar. The 1350 mm long braided steel brake line runs to the brake caliper, where the pads are already pre-installed.\u003c\/p\u003e\n\u003cp\u003eType 5 describes the connection geometry and caliper mount — compare the hole pattern, mount, and lever dimensions with the product image before ordering.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about two hours using a hex key set, socket wrenches, and brake fluid for bleeding.\u003c\/p\u003e\n\u003cp\u003eBrake system for your ATV\/quad, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e160 mm brake lever with integrated fitting and master cylinder\u003c\/li\u003e\n\n\u003cli\u003eBraided steel brake line, 1350 mm length\u003c\/li\u003e\n\n\u003cli\u003eBrake caliper with pre-installed pads\u003c\/li\u003e\n\n\u003cli\u003eType 5 connection geometry and caliper mount\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eComponent for race and off-road use. No ABE\/StVZO approval. Not for use on public roads. Universal item — check connection dimensions, lever dimensions, and caliper mount against your current parts before ordering.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in common sizes\u003c\/li\u003e\n\n\u003cli\u003eSocket wrenches for fastening nuts\u003c\/li\u003e\n\n\u003cli\u003eBrake fluid and bleeding hose\u003c\/li\u003e\n\n\u003cli\u003eApproximately two hours for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × 160 mm brake lever with fitting and master cylinder, 1 × 1350 mm braided steel brake line, 1 × brake caliper with pads. Not included: brake disc, brake fluid, tools, mounting hardware.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the system fit every ATV\/quad with 110 to 250 cc?\u003c\/strong\u003e\u003cbr\u003eUniversal item. Compare lever dimensions, caliper mount, and line length with the product image before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eSystem without ABE or KBA, exclusively for race tracks and off-road use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the system pre-filled and ready to install?\u003c\/strong\u003e\u003cbr\u003eNo. Add brake fluid after installation and bleed the system.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo complete brake system for ATV\/quad 110 to 250 cc. 160 mm brake lever with fitting and pump, 1350 mm braided steel brake line, caliper with pads, ready to install.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712811233614,"sku":"6235384","price":49.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremsanlage-kpl-schwarz-1350mm-Typ-5-fuer.jpg?v=1788885041"},{"product_id":"moturo-6235385","title":"Moturo brake system complete 700mm Type 4 for 110cc to 250cc ATV Quad","description":"\u003ch2\u003eMoturo Complete Brake System 700mm Type 4 for ATV\/Quad 110cc to 250cc\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo complete brake system for your 110cc to 250cc ATV\/Quad — the direct replacement after a brake failure without searching for individual parts. 700mm braided steel line and brake caliper with pads, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brake system complements the front or rear wheel of your ATV. The brake lever with master cylinder housing and pump is mounted on the handlebar, from which the 700mm long braided steel line leads to the brake caliper with pre-installed pads. The components fit most ATV\/Quad platforms in the 110cc to 250cc range with standard caliper mounting patterns and M10 banjo bolts at both the pump and caliper.\u003c\/p\u003e\n\u003cp\u003eInstallation takes about an hour with a hex key set, socket wrench set, and suitable brake fluid for filling and bleeding.\u003c\/p\u003e\n\u003cp\u003eBrake system for your ATV\/Quad, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSheathed 700mm braided steel line\u003c\/li\u003e\n\n\u003cli\u003e160mm brake lever with master cylinder housing and pump\u003c\/li\u003e\n\n\u003cli\u003eBrake caliper with pre-installed pads\u003c\/li\u003e\n\n\u003cli\u003eDesigned for 110cc to 250cc displacement ATVs\/Quads\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes – please read\u003c\/h3\u003e\n\u003cp\u003eComponent for race and off-road use. Brake line without documented ABE\/KBA approval, brake pads without ECE-R90 certification. Not for public road use. Before ordering, compare the caliper mounts, caliper bracket, master cylinder handlebar clamp, and banjo bolt dimensions with those on your ATV\/Quad.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in standard sizes\u003c\/li\u003e\n\n\u003cli\u003eSocket wrench set\u003c\/li\u003e\n\n\u003cli\u003eTorque wrench\u003c\/li\u003e\n\n\u003cli\u003eContainer for collecting old brake fluid\u003c\/li\u003e\n\n\u003cli\u003eAbout one hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × 160mm brake lever with master cylinder housing and pump, 1 × 700mm sheathed braided steel brake line, 1 × brake caliper with pads. Not included: brake fluid, tools, mounting bolts for the frame.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the system fit my ATV or Quad?\u003c\/strong\u003e\u003cbr\u003eUniversal item for 110cc to 250cc platforms. Before ordering, compare the caliper mounts, caliper bracket, master cylinder handlebar clamp, and line length with your bike.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eThe system is for race and off-road use. No ABE\/StVZO approval, not for use on public roads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich brake fluid should I use?\u003c\/strong\u003e\u003cbr\u003eBrake fluid according to your ATV's specifications. Use the specification from your workshop manual and thoroughly bleed the system after filling.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo complete brake system 700mm Type 4 for ATV\/Quad with 110cc to 250cc displacement. Brake lever with master cylinder housing and pump, 700mm sheathed braided steel line, brake caliper with pads. Ready for installation for race and off-road use.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712811331918,"sku":"6235385","price":79.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremsanlage-kpl-700mm-Typ-4-fuer-110ccm-bi.jpg?v=1788885042"},{"product_id":"moturo-6235386","title":"Moturo brake system cpl. black 1600mm Type 3 for 110cc to 250cc ATV Quad","description":"\u003ch2\u003eMoturo complete brake system 1600mm Type 3 for ATV Quad 110-250cc\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo complete brake system for your 110 to 250cc ATV\/Quad — the entire brake control system from lever and master cylinder to brake caliper with pads. 1600 mm braided steel line, 160 mm brake lever, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brake system operates the front or rear brake on your ATV\/Quad from the handlebars. 160 mm brake lever on master cylinder assembly with integrated brake pump, plus a sheathed braided steel brake line with a length of 1600 mm leading to the brake caliper with pre-installed pads. Universal design for 110cc to 250cc quads; compare the connection pattern and mounting points with the photo on the product page before ordering.\u003c\/p\u003e\n\u003cp\u003eReplace the complete brake system in about an hour using a hex key set, open-end wrench set, and a brake bleeder pump. Afterwards, bleed thoroughly and check for leaks.\u003c\/p\u003e\n\u003cp\u003eBrake system for your ATV\/Quad, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e160 mm brake lever with assembly and integrated brake pump\u003c\/li\u003e\n\n\u003cli\u003eSheathed braided steel brake line, 1600 mm length\u003c\/li\u003e\n\n\u003cli\u003eBrake caliper with pre-installed pads\u003c\/li\u003e\n\n\u003cli\u003eUniversal design for 110cc to 250cc quads, Type 3\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eComponent for race and off-road use. No ABE\/StVZO approval. Not for use on public roads. Universal item — compare geometry, connections, and mounting points with the photo on the product page before ordering.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in standard sizes\u003c\/li\u003e\n\n\u003cli\u003eOpen-end wrench set\u003c\/li\u003e\n\n\u003cli\u003eBrake bleeder pump\u003c\/li\u003e\n\n\u003cli\u003eDOT 4 brake fluid\u003c\/li\u003e\n\n\u003cli\u003eAbout one hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × 160 mm brake lever with assembly and brake pump, 1 × 1600 mm braided steel brake line, 1 × brake caliper with pads. Not included: brake fluid, brake disc, mounting screws, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this brake system fit my 200cc quad?\u003c\/strong\u003e\u003cbr\u003eUniversal design for 110cc to 250cc. Compare geometry and connection dimensions with the photo on the product page before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. No ABE\/StVZO approval, not authorized for use on public roads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the brake pads already in the caliper?\u003c\/strong\u003e\u003cbr\u003eYes, the brake caliper comes with pre-installed pads.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo complete brake system for ATV\/Quad from 110cc to 250cc. 160 mm brake lever with assembly and brake pump, sheathed braided steel brake line 1600 mm, brake caliper with pre-installed pads. Component for race and off-road use, no ABE\/StVZO approval.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712811430222,"sku":"6235386","price":49.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremsanlage-kpl-schwarz-1600mm-Typ-3-fuer.jpg?v=1788885045"},{"product_id":"moturo-6235387","title":"Moturo complete brake system black 2800mm Type 2 for 110cc to 250cc ATV Quad","description":"\u003ch2\u003eMoturo complete brake system for ATVs and quads 110 to 250 cc\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo complete brake system for your 110 to 250 cc ATV\/quad — the frequent replacement after a crash or worn pads. Brake lever with master cylinder, 2800 mm braided steel line, and brake caliper with pads, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe system includes a 160 mm brake lever with assembly and integrated master cylinder, a sheathed braided steel line with a total length of 2800 mm, and a brake caliper including pads. The distance between the distributor and the brake caliper is approximately 45 cm. Universal design for 110 to 250 cc ATVs and quads.\u003c\/p\u003e\n\u003cp\u003eInstallation takes about an hour using a hex key set, ring wrenches, and a brake bleeder.\u003c\/p\u003e\n\u003cp\u003eBrake system for your ATV\/quad, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBrake lever 160 mm with assembly and integrated master cylinder\u003c\/li\u003e\n\n\u003cli\u003eSheathed braided steel line 2800 mm, distance from distributor to brake caliper approx. 45 cm\u003c\/li\u003e\n\n\u003cli\u003eBrake caliper including pads\u003c\/li\u003e\n\n\u003cli\u003eUniversal design for 110 to 250 cc ATVs and quads\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eComponent for race and off-road use. No ABE\/StVZO approval. Not for use on public roads.\u003c\/p\u003e\n\u003cp\u003eUniversal item — compare dimensions, connection geometry, and hole pattern with your vehicle before ordering.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in common sizes\u003c\/li\u003e\n\n\u003cli\u003eRing wrenches for the brake line connections\u003c\/li\u003e\n\n\u003cli\u003eBrake bleeder and collection container\u003c\/li\u003e\n\n\u003cli\u003eApprox. one hour including bleeding\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e1 × Brake lever 160 mm with assembly and master cylinder\u003c\/li\u003e\n\n\u003cli\u003e1 × Braided steel line 2800 mm (distributor to brake caliper approx. 45 cm)\u003c\/li\u003e\n\n\u003cli\u003e1 × Brake caliper including pads\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eNot included: brake fluid, tools, mounting hardware.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the system fit every ATV\/quad between 110 and 250 cc?\u003c\/strong\u003e\u003cbr\u003eUniversal design. Compare connection geometry, hole pattern, and line routing with your vehicle before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich brake fluid should I use?\u003c\/strong\u003e\u003cbr\u003eUse the specification indicated in your vehicle's workshop manual.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a registration with the TÜV?\u003c\/strong\u003e\u003cbr\u003eNo. Component for race and off-road use, without ABE and without StVZO approval; not permitted on public roads.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo complete brake system for ATVs and quads 110 to 250 cc. Brake lever 160 mm with assembly and master cylinder, sheathed braided steel line 2800 mm, brake caliper with pads. Only for race and off-road use, no ABE\/StVZO approval.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712811528526,"sku":"6235387","price":72.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremsanlage-kpl-schwarz-2800mm-Typ-2-fuer.jpg?v=1788885043"},{"product_id":"moturo-6235388","title":"Moturo brake system cpl. silver 1750mm type 1 for 110cc to 250cc ATV Quad","description":"\u003ch2\u003eMoturo complete brake system silver 1750mm Type 1 for ATV\/Quad 110-250cc\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe complete Moturo brake system in silver for ATV\/Quads with 110cc to 250cc — main brake for sport and off-road use without road approval. 160mm brake lever with master cylinder, 1750mm steel braided hose and brake caliper, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brake system provides a hand lever, hose, and caliper as a closed hydraulic unit for the front brake of your ATV\/Quad. 160mm brake lever with integrated master cylinder and housing, 1750mm sheathed steel braided brake hose, and brake caliper with pre-installed pads. Universal geometry for common 110cc to 250cc quad platforms; mounting on the handlebar and floating caliper carrier according to the factory hole pattern of the respective platform.\u003c\/p\u003e\n\u003cp\u003eBefore installation, compare the handlebar lever mount, hose routing, and caliper adapter with the existing parts on your quad. After mounting, properly fill and bleed the system.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about an hour using a hex key set, open-end wrench set, brake cleaner, and bleeding hose.\u003c\/p\u003e\n\u003cp\u003eBrake system for your ATV\/Quad, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Figures\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e160mm brake lever with integrated master cylinder and housing\u003c\/li\u003e\n\n\u003cli\u003e1750mm steel braided brake hose, sheathed\u003c\/li\u003e\n\n\u003cli\u003eBrake caliper with pre-installed pads\u003c\/li\u003e\n\n\u003cli\u003eDesigned for common 110cc to 250cc quad platforms\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eBrake system for race and off-road use. No ABE\/StVZO approval. Not for use on public roads. Brake hose without documented ABE\/KBA approval; brake pads without ECE-R90 approval. Compare dimensions, handlebar lever mount, hose length, and caliper geometry with your quad's existing parts before ordering.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in common sizes\u003c\/li\u003e\n\n\u003cli\u003eOpen-end wrench set or socket wrench set\u003c\/li\u003e\n\n\u003cli\u003eBrake cleaner\u003c\/li\u003e\n\n\u003cli\u003eBleeding hose and collection container\u003c\/li\u003e\n\n\u003cli\u003eApproximately one hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × 160mm brake lever with housing and master cylinder, 1 × 1750mm sheathed steel braided brake hose, 1 × brake caliper with pads. Not included: brake fluid, connection adapters if different from the platform, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this brake system fit my 200cc quad?\u003c\/strong\u003e\u003cbr\u003eGeometry is designed for 110cc to 250cc platforms. Compare the handlebar lever mount, caliper mount, and hose routing with the product image before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a registration for installation?\u003c\/strong\u003e\u003cbr\u003eThe system is intended for race and off-road use, no ABE\/StVZO. Not permitted on public roads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich brake fluid should I use?\u003c\/strong\u003e\u003cbr\u003eStandard DOT 4 according to platform specifications. Keep the system clean during filling and bleeding.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo complete brake system in silver with 1750mm steel braided hose for ATV\/Quad with 110cc to 250cc. 160mm brake lever with master cylinder, brake caliper with pads, ready for installation. Race and off-road use, no StVZO approval.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712811626830,"sku":"6235388","price":59.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremsanlage-kpl-silber-1750mm-Typ-1-fuer-1.jpg?v=1788885043"},{"product_id":"moturo-6235389","title":"Moturo rear brake caliper black type 9- M10 - for 50cc to 250cc ATV Quad","description":"\u003ch2\u003eMoturo rear brake caliper Type 9 M10 black for ATV, Quad and scooter\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo rear brake caliper Type 9 M10 in black for ATVs, quads, and scooters from 50 to 250 cc — universal replacement for common platforms from China. M10 hydraulic connection, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brake caliper is located on the rear brake and handles the hydraulic clamping. The mounting holes are designed for common brake systems of Chinese ATVs, quads, and scooters in the 50 to 250 cc displacement range. M10 hydraulic connection, black finish.\u003c\/p\u003e\n\u003cp\u003eManufactured in OEM quality according to product specifications. After replacement, the brake system must be bled and filled with fresh brake fluid.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about an hour using a hex key set, socket wrench, and torque wrench.\u003c\/p\u003e\n\u003cp\u003eRear brake caliper for ATV, quad, and scooter, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eM10 hydraulic connection, black finish\u003c\/li\u003e\n\n\u003cli\u003eMounting fits common brake systems of Chinese ATVs, quads, and scooters\u003c\/li\u003e\n\n\u003cli\u003eDisplacement range 50 to 250 cc\u003c\/li\u003e\n\n\u003cli\u003eOEM quality according to product specifications\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (general operating permit) required. Universal item: Check the mounting geometry, hole pattern, and hydraulic connection against the currently installed brake caliper before ordering. After replacement, it is mandatory to bleed the system and fill with fresh brake fluid.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in common sizes\u003c\/li\u003e\n\n\u003cli\u003eSocket wrench for the mounting bolts\u003c\/li\u003e\n\n\u003cli\u003eTorque wrench\u003c\/li\u003e\n\n\u003cli\u003eBrake fluid and bleeding hose\u003c\/li\u003e\n\n\u003cli\u003eAbout one hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × rear brake caliper Type 9 M10 in black (ready for installation). Not included: brake pads, brake fluid, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the caliper fit my 110cc quad?\u003c\/strong\u003e\u003cbr\u003eThe component is designed as a universal replacement for ATVs, quads, and scooters from 50 to 250 cc. Compare the mounting geometry, hole pattern, and hydraulic connection with the installed caliper before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original spare part design, no separate ABE required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I have to bleed the system after replacement?\u003c\/strong\u003e\u003cbr\u003eYes. Bleed the brake system after replacement and fill with fresh brake fluid, otherwise there will be no braking effect.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo rear brake caliper Type 9 M10 in black for ATVs, quads, and scooters from 50 to 250 cc. Universal replacement for common platforms from China, M10 hydraulic connection. Original spare part design, ready for installation — compare mounting before ordering.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712811659598,"sku":"6235389","price":29.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremssattel-hinten-schwarz-Typ-9--M10-fuer.jpg?v=1788885044"},{"product_id":"moturo-6235390","title":"Moturo rear brake master cylinder silver - M10 - for 50cc to 250cc ATV Quad","description":"\u003ch2\u003eMoturo rear brake master cylinder silver M10 for ATV Quad 50cc to 250cc\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo rear brake master cylinder in silver for your ATV\/Quad from 50cc to 250cc — the central sender for the rear foot brake, ready for installation with connection hose and external reservoir.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brake master cylinder builds up the hydraulic pressure for the rear brake. The movable plunger has a thread for adjusting the length; the pedal mount accommodates 8 mm holes and is 10 mm wide. Two M8 threaded holes are used for mounting to the frame.\u003c\/p\u003e\n\u003cp\u003eThe brake line connection is for an M10 banjo bolt; the hose to the reservoir is flexible and rotatable. Can be replaced in about an hour with a hex key set, open-end wrench set, and torque wrench.\u003c\/p\u003e\n\u003cp\u003eBrake master cylinder for your ATV\/Quad, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBrake line connection: M10 banjo bolt\u003c\/li\u003e\n\n\u003cli\u003eMounting: two holes with M8 thread\u003c\/li\u003e\n\n\u003cli\u003ePedal mount: 8 mm hole, 10 mm wide\u003c\/li\u003e\n\n\u003cli\u003eMovable plunger with thread for length adjustment\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal replacement part design, no separate ABE (general operating permit) required. Universal item for ATV\/Quad from 50cc to 250cc — check connections, hole pattern, and plunger length against your existing part before ordering.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in common sizes\u003c\/li\u003e\n\n\u003cli\u003eOpen-end wrench set for banjo bolt and mounting nuts\u003c\/li\u003e\n\n\u003cli\u003eTorque wrench\u003c\/li\u003e\n\n\u003cli\u003eAbout one hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × rear brake master cylinder in silver, 1 × connection hose, 1 × external reservoir. Not included: brake fluid, brake line, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the brake master cylinder fit my 150cc quad?\u003c\/strong\u003e\u003cbr\u003eUniversal item for ATV\/Quad from 50cc to 250cc. Compare connections and hole pattern with your existing part before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original replacement part design, no separate ABE required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs brake fluid included?\u003c\/strong\u003e\u003cbr\u003eNo, brake fluid is not included. Please purchase separately.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo rear brake master cylinder in silver with M10 banjo bolt connection for ATV\/Quad from 50cc to 250cc. Universal item with connection hose and external reservoir, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712811921742,"sku":"6235390","price":27.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremspumpe-hinten-silber-M10-fuer-50ccm-bi.jpg?v=1788885045"},{"product_id":"moturo-6235391","title":"Moturo rear brake caliper silver type 5 - M10 - for 110cc to 250cc ATV quad","description":"\u003ch2\u003eMoturo rear brake caliper type 5 for ATV\/quad and scooter 110 to 250 cc\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo rear brake caliper type 5 with M10 mounting hole for your ATV, quad or scooter with 110 to 250 cc — a universal replacement caliper for many Chinese-made platforms. Supplied ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brake caliper is located on the rear axle, engages with the brake disc, and transfers pressure from the hydraulic line to the pads. Type 5 design with M10 mounting hole, the standard hole pattern for many engine sizes of Chinese manufacture. A universal item for ATVs, quads, and scooters from 110 to 250 cc.\u003c\/p\u003e\n\u003cp\u003eWhen replacing, bleeding the brake system is mandatory; fresh brake fluid should be used in the same process.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about an hour with a socket wrench set, torque wrench, and bleeding tool.\u003c\/p\u003e\n\u003cp\u003eBrake caliper for your ATV or quad, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eType 5 design with M10 mounting hole\u003c\/li\u003e\n\n\u003cli\u003eRear axle mounting, hydraulically operated\u003c\/li\u003e\n\n\u003cli\u003eUniversal item for ATVs, quads, and scooters from 110 to 250 cc\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eRegistration-free replacement\/wear part; replacement does not require entry in vehicle documents. Universal item — compare the M10 hole pattern and center distance with the removed caliper before ordering. Bleeding and fresh brake fluid are mandatory when replacing.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSocket wrench set in standard sizes\u003c\/li\u003e\n\n\u003cli\u003eTorque wrench\u003c\/li\u003e\n\n\u003cli\u003eBleeding tool and fresh brake fluid\u003c\/li\u003e\n\n\u003cli\u003eAbout one hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × rear brake caliper type 5 (ready to install). Not included: brake fluid, mounting bolts, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhich machines are compatible?\u003c\/strong\u003e\u003cbr\u003eUniversal item for many Chinese-made quads, ATVs, and scooters from 110 to 250 cc. Before ordering, compare the M10 mounting hole and the center distance with the removed caliper.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need new brake fluid?\u003c\/strong\u003e\u003cbr\u003eYes. When replacing, the brake system must be bled, and fresh brake fluid should be used in the same process.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the caliper fit larger quads over 250 cc?\u003c\/strong\u003e\u003cbr\u003eThe universal item covers 110 to 250 cc. For over 250 cc, compare the hole pattern and dimensions with the original caliper before ordering.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo rear brake caliper type 5 silver with M10 mounting hole for ATV, quad, and scooter (110 to 250 cc). Universal item for common Chinese-made platforms, supplied ready to install.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712812020046,"sku":"6235391","price":27.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremssattel-hinten-silber-Typ-5-M10-fuer-1.jpg?v=1788885045"},{"product_id":"moturo-6235392","title":"Moturo front left brake master cylinder complete with lever for 50cc to 250cc ATV Quad","description":"\u003ch2\u003eMoturo front left brake master cylinder complete with lever for ATV\/Quad 50-250cc\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo front left brake master cylinder complete with lever for your 50cc to 250cc ATV\/Quad — brake master cylinder, brake lever, and reservoir are housed in a single unit on the left handlebar. Features lever reach adjustment and an external bleeder screw, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brake master cylinder is mounted on the left handlebar and operates the front brake. Includes lever reach adjustment via a set screw for different hand sizes. The reservoir is integrated, and bleeding is performed via the external screw nipple without disassembly.\u003c\/p\u003e\n\u003cp\u003eUniversal item for ATVs and quads from 50cc to 250cc. Before installation, compare the brake line connection thread, mounting dimensions, and handlebar diameter with your original component.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about an hour using a hex key set, open-ended wrenches, and fresh brake fluid for filling and bleeding.\u003c\/p\u003e\n\u003cp\u003eBrake master cylinder for your ATV\/Quad, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLever reach adjustment via set screw for different hand sizes\u003c\/li\u003e\n\n\u003cli\u003eIntegrated reservoir with external bleeder screw\u003c\/li\u003e\n\n\u003cli\u003eUniversal item for ATVs and quads from 50cc to 250cc\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal equipment style, no separate ABE (general operating permit) required. Universal item: compare brake line connection thread, handlebar diameter, and mounting dimensions with the original component before installation. If dimensions differ, the part will not fit properly.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSet of hex keys in standard sizes\u003c\/li\u003e\n\n\u003cli\u003eOpen-ended wrench for the brake line banjo bolt\u003c\/li\u003e\n\n\u003cli\u003eFresh brake fluid for filling and bleeding\u003c\/li\u003e\n\n\u003cli\u003eAbout one hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × front left brake master cylinder complete with lever and integrated reservoir (ready for installation). Not included: brake fluid, brake line, banjo bolt, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this brake master cylinder fit every ATV or quad between 50cc and 250cc?\u003c\/strong\u003e\u003cbr\u003eUniversal item. Before ordering, compare the brake line connection thread, handlebar diameter, and mounting dimensions with the original component.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original equipment style, no separate ABE required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the brake master cylinder bled?\u003c\/strong\u003e\u003cbr\u003eVia the screw nipple on the reservoir — fill and bleed from the outside without disassembly.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo front left brake master cylinder complete with lever for ATV\/Quad 50cc to 250cc. Brake master cylinder with lever reach adjustment and integrated reservoir, bleeding via external screw nipple, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712812085582,"sku":"6235392","price":27.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremspumpe-vorne-links-kpl-mit-Hebel-fuer.jpg?v=1788885046"},{"product_id":"moturo-6235393","title":"Moturo front right brake master cylinder complete with lever for 50cc to 250cc ATV Quad","description":"\u003ch2\u003eMoturo front right brake master cylinder for 50-250cc ATV\/Quad\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo front right brake master cylinder for your 50-250cc ATV\/Quad — the handlebar master cylinder for when you lose pressure or need a replacement due to crash damage. Includes lever reach adjustment, integrated reservoir, and external bleeder nipple; ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe master cylinder is mounted on the right handlebar and operates the front brake caliper. The lever reach adjustment allows you to adapt the grip distance to your hand size, and the reservoir is built directly in. Bleeding is performed via the external screw nipple without needing to disassemble the housing.\u003c\/p\u003e\n\u003cp\u003eUniversal item for ATVs and quads from 50cc to 250cc. Before ordering, please compare the lever length, connection thread, and banjo bolt diameter with your old part and the product image.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about an hour with an Allen key set, open-ended wrench, and new DOT 4 brake fluid. Connect the brake line, fill the reservoir, bleed the system completely, and then check the pressure point.\u003c\/p\u003e\n\u003cp\u003eBrake master cylinder for ATV\/Quad, manufactured by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLever reach adjustment on the brake lever\u003c\/li\u003e\n\n\u003cli\u003eIntegrated reservoir\u003c\/li\u003e\n\n\u003cli\u003eExternal bleeder screw for bleeding without disassembly\u003c\/li\u003e\n\n\u003cli\u003eUniversal item for ATVs and quads from 50cc to 250cc\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eReplacement\/wear part that does not require registration; installation does not need to be documented.\u003c\/p\u003e\n\u003cp\u003eUniversal item — before ordering, compare the connection geometry, banjo bolt diameter, and lever length with your old part and the product image.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSet of Allen keys in common sizes\u003c\/li\u003e\n\n\u003cli\u003eOpen-ended wrench for the brake line fitting\u003c\/li\u003e\n\n\u003cli\u003eDOT 4 brake fluid (or as specified by your system)\u003c\/li\u003e\n\n\u003cli\u003eApproximately one hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × front right brake master cylinder with lever and integrated reservoir (ready for mounting). Not included: brake line, brake fluid, handlebar clamps, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the brake master cylinder really fit my 90cc quad?\u003c\/strong\u003e\u003cbr\u003eUniversal item for ATVs and quads from 50cc to 250cc. Before ordering, compare the banjo bolt diameter, lever length, and handlebar clamp dimension with your old part and the product image.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich brake fluid should I use?\u003c\/strong\u003e\u003cbr\u003eDOT 4 is standard. Check the requirements of your existing system before filling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I also mount the master cylinder on the left handlebar?\u003c\/strong\u003e\u003cbr\u003eNo. The lever geometry and connection side are designed for the right side of the handlebar.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo front right brake master cylinder with lever for ATV\/Quad from 50cc to 250cc. Lever reach adjustment and integrated reservoir, external bleeder screw. Universal item, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712812151118,"sku":"6235393","price":29.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremspumpe-vorne-rechts-kpl-mit-Hebel-fuer.jpg?v=1788885047"},{"product_id":"moturo-6235394","title":"Moturo rear brake caliper black type 2 - M10 - for 50cc to 250cc ATV Quad","description":"\u003ch2\u003eMoturo Rear Brake Caliper Type 2 M10 Black for China ATV Quad 50-250cc\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo rear brake caliper in black (Type 2, M10) for your China ATV, quad, or scooter from 50 to 250 cc — the part most frequently replaced due to heat, downtime, and seized pistons. M10 connection, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brake caliper is located at the rear on the brake disc and pushes the pads against the disc via the hydraulic piston. Connection for the brake line in M10. Type 2 version in black.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about an hour using a hex key set, ring wrench for the banjo bolt, and a brake bleeder. Bleed the brake system after installation; use fresh brake fluid.\u003c\/p\u003e\n\u003cp\u003eRear brake caliper for your ATV, quad, or scooter, manufactured by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eType 2 design, M10 connection\u003c\/li\u003e\n\n\u003cli\u003eBlack finish\u003c\/li\u003e\n\n\u003cli\u003eApplication range 50 cc to 250 cc\u003c\/li\u003e\n\n\u003cli\u003ePosition on the rear brake disc\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (general operating permit) required. Universal item for China ATV, quad, and scooter from 50 cc to 250 cc: please compare the design, M10 connection thread, hole pattern, caliper mount, and piston diameter with the currently installed caliper before ordering. Bleeding the brake system is mandatory after replacement; use fresh brake fluid.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in standard sizes\u003c\/li\u003e\n\n\u003cli\u003eRing wrench for the brake line banjo bolt\u003c\/li\u003e\n\n\u003cli\u003eBrake bleeder and fresh brake fluid\u003c\/li\u003e\n\n\u003cli\u003eAbout one hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of Delivery\u003c\/h3\u003e\n\u003cp\u003e1 × rear brake caliper Type 2 in black, M10 connection. Not included: brake pads, brake line, banjo bolt, sealing rings, brake fluid, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this caliper fit every China quad?\u003c\/strong\u003e\u003cbr\u003eNo. Compare the Type 2 design and M10 connection with your currently installed caliper in advance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre brake pads included?\u003c\/strong\u003e\u003cbr\u003eNo, order pads separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the system need to be bled?\u003c\/strong\u003e\u003cbr\u003eYes. Bleed completely after every caliper change and refill with fresh brake fluid.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo rear brake caliper Type 2 in black with M10 connection for China ATV, quad, and scooter from 50 cc to 250 cc. Original spare part design, ready for installation; bleed the brake system after installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712812249422,"sku":"6235394","price":29.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremssattel-hinten-schwarz-Typ-2-M10-fuer.jpg?v=1788885047"},{"product_id":"moturo-6235395","title":"Moturo front right brake master cylinder black for 50cc to 250cc ATV Quad","description":"\u003ch2\u003eMoturo Front Right Brake Master Cylinder for 50-250cc ATVs\/Quads\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo front right brake master cylinder for your ATV\/quad (50cc to 250cc) — the central pressure generator in the brake circuit and a standard replacement part following a fall or due to corrosion. M10 thread, black, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brake master cylinder is located on the right side of the handlebar and generates hydraulic pressure for the front wheel brake. The brake line is connected via an M10 thread, the brake lever mount accommodates standard lever geometries, and the housing is finished in black paint.\u003c\/p\u003e\n\u003cp\u003eThe universal handlebar mount fits various handlebars on quads and ATVs in the 50cc to 250cc displacement range. Before ordering, compare the lever travel, connection bore, and brake line fitting with your existing part, as well as the mount for the brake light switch.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about an hour using a hex key set, an open-end wrench for the brake line fitting, and brake fluid to bleed the system.\u003c\/p\u003e\n\u003cp\u003eBrake master cylinder for your ATV\/quad, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eM10 connection thread at the brake line outlet\u003c\/li\u003e\n\n\u003cli\u003eUniversal handlebar mount for various quad handlebars\u003c\/li\u003e\n\n\u003cli\u003eIndividual brake master cylinder in a black housing\u003c\/li\u003e\n\n\u003cli\u003eDesigned for displacement classes from 50cc to 250cc\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes – Please Read\u003c\/h3\u003e\n\u003cp\u003eOriginal equipment replacement type, no separate ABE (general operating permit) required. Universal item — before ordering, compare the lever mount, brake line connection, brake light switch, and handlebar clamp with your existing part. Will not fit if the connection thread differs.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in common sizes\u003c\/li\u003e\n\n\u003cli\u003eOpen-end wrench for the brake line fitting\u003c\/li\u003e\n\n\u003cli\u003eBrake fluid for bleeding the brake system\u003c\/li\u003e\n\n\u003cli\u003eApproximately one hour including bleeding\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of Delivery\u003c\/h3\u003e\n\u003cp\u003e1 × Brake master cylinder, front right (black, M10 thread). Not included: brake lever, brake line, brake fluid, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the brake master cylinder fit every ATV or quad between 50cc and 250cc?\u003c\/strong\u003e\u003cbr\u003eNo, please compare the connection thread, lever mount, and handlebar clamp with the photo on the product page.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original equipment replacement type, no modification requiring registration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the pump also work on the left side of the handlebar?\u003c\/strong\u003e\u003cbr\u003eNo, the housing is designed for the right side.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo front right brake master cylinder in black for ATVs and quads with a displacement of 50cc to 250cc. Universal M10 brake line connection, handlebar mount for various quad handlebars. Original equipment replacement type, ready to install.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712812282190,"sku":"6235395","price":14.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremspumpe-vorne-rechts--schwarz-fuer-50cc.jpg?v=1788885048"},{"product_id":"moturo-6235396","title":"Moturo brake line 500mm - M8 M10 - for ATV Quad Dirt Bike","description":"\u003ch2\u003eMoturo Brake Line 500mm Connection M8 M10 for ATV, Quad and Dirt Bike\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo 500mm brake line for ATVs, quads, and dirt bikes with hydraulic disc brakes — universal hydraulic line with M8 and M10 connections, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brake line connects the master cylinder and the brake caliper of your hydraulic disc brake system. The line measures 500 millimeters, and the connection ends are designed in M8 and M10 — the universal geometry fits ATVs, quads, dirt bikes, and scooters, provided the existing connection threads match.\u003c\/p\u003e\n\u003cp\u003eBefore installation, compare the connection threads and bore positions with your existing component — this universal item does not replace model-specific verification. Follow your workshop manual for torque specifications.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour using standard size open-end wrenches and a brake bleeder.\u003c\/p\u003e\n\u003cp\u003eBrake line for ATV, quad, and dirt bike, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Facts\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLine length 500 millimeters, connections in M8 and M10\u003c\/li\u003e\n\n\u003cli\u003eUniversal item for ATV, quad, dirt bike, and scooter with hydraulic disc brakes\u003c\/li\u003e\n\n\u003cli\u003eConnects master cylinder and brake caliper\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes – please read\u003c\/h3\u003e\n\u003cp\u003eComponent for race and off-road use. No ABE\/StVZO approval. Not for use on public roads. Before installation, compare the connection threads and line length with the existing component — the universal geometry does not replace model-specific measurement verification.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eOpen-end wrenches in standard sizes\u003c\/li\u003e\n\n\u003cli\u003eBrake bleeder\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × brake line 500 millimeters with M8 and M10 connections. Not included: brake fluid, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the line fit my bike?\u003c\/strong\u003e\u003cbr\u003eAs long as the connection threads on the master cylinder and brake caliper are M8 and M10 and the length is suitable. Verify with your existing component beforehand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eThe part does not have an ABE and is approved exclusively for race and off-road use, not for public road traffic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included in the scope of delivery?\u003c\/strong\u003e\u003cbr\u003eOne 500-millimeter brake line with M8 and M10 connections. Brake fluid and tools are not included.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo brake line 500mm for ATV, quad, dirt bike, and scooter with hydraulic disc brake. M8 and M10 connections, universal geometry, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712812380494,"sku":"6235396","price":8.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremsleitung-500mm-M8-M10-fuer-ATV--Quad-1.jpg?v=1788885050"},{"product_id":"moturo-6235397","title":"Moturo braided stainless steel brake line 1070mm - M10 M10 - for ATV Quad Dirt Bike","description":"\u003ch2\u003eMoturo Braided Steel Brake Line 1070 mm M10\/M10 for ATV, Quad and Dirt Bike\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo braided steel brake line 1070 mm for ATV, Quad and Dirt Bike — steel mesh encases the inner hose and prevents expansion under braking pressure. M10 connections on both sides, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe line connects the master brake cylinder and the brake caliper. The mesh keeps the inner hose in shape, ensuring that the braking force is delivered directly to the caliper and the pressure point remains clear.\u003c\/p\u003e\n\u003cp\u003eUniversal item for ATV, Quad and Dirt Bike. Connection thread M10 on both sides. Compare bore holes, connection angles, length, and routing with your bike's original line before ordering.\u003c\/p\u003e\n\u003cp\u003eCan be replaced in about half an hour using a ring wrench and brake bleeder. Afterward, change the brake fluid and bleed the system properly.\u003c\/p\u003e\n\u003cp\u003eBrake line for ATV, Quad and Dirt Bike, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Facts\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength 1070 mm, M10 connection thread on both sides\u003c\/li\u003e\n\n\u003cli\u003eSteel mesh casing to prevent expansion under braking pressure\u003c\/li\u003e\n\n\u003cli\u003eUniversal item for ATV, Quad and Dirt Bike\u003c\/li\u003e\n\n\u003cli\u003eDirect pressure transmission, clear pressure point\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes – please read\u003c\/h3\u003e\n\u003cp\u003eBrake line without documented ABE\/KBA approval. For race\/off-road use only; not for public road traffic. Compare connection angles, routing, and length with the original line before ordering.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eRing wrench for the hollow screw\u003c\/li\u003e\n\n\u003cli\u003eBrake bleeder and fresh brake fluid\u003c\/li\u003e\n\n\u003cli\u003eCollection container and clean rags\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × braided steel brake line 1070 mm with M10 on both sides. Not included: hollow screws, sealing rings, brake fluid, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the line have an ABE or approval?\u003c\/strong\u003e\u003cbr\u003eNo. Brake line without documented ABE\/KBA approval, exclusively for race and off-road use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat kind of connection is it exactly?\u003c\/strong\u003e\u003cbr\u003eM10 on both sides. Hollow screws and sealing rings are not included; compare with your bike before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the length fit my quad?\u003c\/strong\u003e\u003cbr\u003eLength 1070 mm. Compare routing and end points with your quad's original line before ordering.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo braided steel brake line 1070 mm for ATV, Quad and Dirt Bike. Steel mesh casing against expansion under braking pressure. M10 connection on both sides, ready for installation. Race and off-road use, no ABE\/KBA approval.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712812446030,"sku":"6235397","price":10.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Stahlflex-Bremsleitung-1070mm-M8-M10-fuer.jpg?v=1788885050"},{"product_id":"moturo-6235398","title":"Moturo spring for brake light switch ATV quad","description":"\u003ch2\u003eMoturo Return Spring for Brake Light Switch - Chinese ATV\/Quad\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo return spring for the rear brake light switch on Chinese ATVs, quads, and dirt bikes — a small wear part that pulls the switch back and, if defective, disables the brake light circuit. Universal size, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe spring pulls the brake light switch on the rear wheel back into its rest position. As soon as you step on the brake pedal, the trigger moves, the circuit closes, and the brake light illuminates. If the spring breaks or loses tension, the brake light either stays on permanently or fails to light up at all.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with combination pliers and a screwdriver. The spring is simply hooked into the original eyelets on the switch and lever mechanism.\u003c\/p\u003e\n\u003cp\u003eReturn spring for Chinese ATV, quad, and dirt bike, manufactured by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eUniversal size for Chinese ATVs, quads, and dirt bikes with a rear brake light switch\u003c\/li\u003e\n\n\u003cli\u003eHangs between the switch and the trigger on the brake lever\u003c\/li\u003e\n\n\u003cli\u003eTension spring; if it fails, the brake light will not function\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes – please read\u003c\/h3\u003e\n\u003cp\u003eRegistration-free spare\/wear part; replacement does not require registration. Universal item — please compare wire thickness, length, and hook shape with the measurements in the product image before ordering.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCombination pliers or needle-nose pliers\u003c\/li\u003e\n\n\u003cli\u003eSmall screwdriver for prying out the old spring\u003c\/li\u003e\n\n\u003cli\u003eApprox. half an hour\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of Delivery\u003c\/h3\u003e\n\u003cp\u003e1 × Brake light switch return spring. Not included: brake light switch, mounting hardware, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the spring fit every Chinese ATV?\u003c\/strong\u003e\u003cbr\u003eFor most models with a rear brake light switch — yes. Compare the hook spacing and wire thickness with the product image before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy brake light stays on permanently; is it always the spring?\u003c\/strong\u003e\u003cbr\u003eNot necessarily. First, check the switch and connectors. If the spring is unhooked or broken, the trigger remains in the pressed position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I change the spring myself?\u003c\/strong\u003e\u003cbr\u003eYes, no shop visit required. Pry out the old spring and hook the new one into the same eyelets.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo return spring for the rear brake light switch on Chinese ATVs, quads, and dirt bikes. Hangs between the switch and the brake lever trigger; universal size, ready for installation. Registration-free spare\/wear part; replacement does not require registration. \u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712812511566,"sku":"6235398","price":4.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Feder-fuer-Bremslichtschalter-ATV--Quad.jpg?v=1788885050"},{"product_id":"moturo-6235399","title":"Motor brake spring 80mm for ATV Quad Dirt Bike","description":"\u003ch2\u003eMoturo Brake Cable Spring 80 mm for ATV, Quad and Dirt Bike\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo brake cable spring for ATV, quad and dirt bike as a universal item — the return spring on the brake mechanism that often needs to be replaced after a fall or due to material fatigue. 80 mm total length, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe tension spring pulls the brake lever back into its starting position after braking. It is located between the brake lever and the brake anchor and ensures a defined pressure point as well as a clean release of the brake. The total length is 80 mm; this measurement covers many braking systems on ATVs, quads and dirt bikes.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with needle-nose pliers for hooking in, combination pliers for pre-tensioning, and a bit of finesse when inserting into the retaining eyelets.\u003c\/p\u003e\n\u003cp\u003eBrake cable spring for your ATV, quad or dirt bike, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eTotal length 80 mm according to product source\u003c\/li\u003e\n\n\u003cli\u003eTension spring for returning the brake lever after braking\u003c\/li\u003e\n\n\u003cli\u003eUniversal size for ATV, quad and dirt bike\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eRegistration-free spare\/wear part; replacement does not require entry in vehicle documents. Universal item: Compare the total length of 80 mm and the shape of the retaining eyelets with the product image before ordering.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eNeedle-nose pliers for hooking in the spring eyelet\u003c\/li\u003e\n\n\u003cli\u003eCombination pliers for pre-tensioning\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × brake cable spring 80 mm. Not included: tools, fastening elements.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the spring fit every ATV or quad?\u003c\/strong\u003e\u003cbr\u003eUniversal item. Compare the total length of 80 mm and the shape of the retaining eyelets with the product image before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the component need to be registered?\u003c\/strong\u003e\u003cbr\u003eNo. This spare\/wear part does not require registration; correct dimensions, design and proper installation are what matters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the spring for?\u003c\/strong\u003e\u003cbr\u003eIt pulls the brake lever back into the starting position after braking and ensures a clean pressure point.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo brake cable spring 80 mm for ATV, quad and dirt bike. Pulls the brake lever back to the starting position after braking. Universal size, ready for installation. Registration-free spare\/wear part; replacement does not require entry in vehicle documents. Designed exclusively as a spare\/wear part.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712812577102,"sku":"6235399","price":2.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Feder-Bremse-80mm-fuer-ATV--Quad--Dirt--Bi.jpg?v=1788885051"},{"product_id":"moturo-6235401","title":"Moturo brake spring 80mm for ATV Quad Dirt Bike","description":"\u003ch2\u003eMoturo Brake Spring 80mm Tension Spring for ATV Quad Dirt Bike\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo tension spring for the brake on your ATV, quad, or dirt bike — the wear part that pulls the brake lever or brake pedal back into its resting position. Total length 80 mm, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe spring pulls the brake lever or brake pedal back after release and prevents the brake from dragging. With a total length of 80 mm, it is designed as a universal item and fits many common ATV, quad, and dirt bike brake mechanisms.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with a spring puller and combination pliers.\u003c\/p\u003e\n\u003cp\u003eBrake spring for your ATV or quad, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eTotal length 80 mm (tension spring with end hooks)\u003c\/li\u003e\n\n\u003cli\u003eUniversal item for brake lever and brake pedal retraction\u003c\/li\u003e\n\n\u003cli\u003eApplication area: ATV, quad, dirt bike, pit bike\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eReplacement\/wear part that does not require approval; replacement does not need to be registered. Universal item — compare the total length, wire thickness, and hook shape with your original spring before purchasing.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSpring puller or spring hook\u003c\/li\u003e\n\n\u003cli\u003eCombination pliers\u003c\/li\u003e\n\n\u003cli\u003eApproximately half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × brake tension spring 80 mm. Not included: tools, other brake accessories.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the spring fit my quad?\u003c\/strong\u003e\u003cbr\u003eUniversal item — compare the total length (80 mm), wire thickness, and hook shape with your original spring using the product image.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the part need to be registered?\u003c\/strong\u003e\u003cbr\u003eNo. This replacement\/wear part does not require registration; correct dimensions, design, and proper installation are what matter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the spring for the front or rear brake?\u003c\/strong\u003e\u003cbr\u003eBoth are possible, depending on the brake mechanism of your ATV or dirt bike. Compare the dimensions on the product page.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo brake spring 80 mm tension spring as a universal item for ATV, quad, dirt bike, and pit bike. Pulls the brake lever or brake pedal back into the resting position, ready for installation. Replacement\/wear part that does not require approval; replacement does not need to be registered. \u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712812675406,"sku":"6235401","price":2.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Feder-Bremse-80mm-fuer-ATV--Quad--Dirt--Bi_aa6ee51c-5d41-440b-92c4-1e0daab4cf83.jpg?v=1788885051"},{"product_id":"moturo-6235402","title":"Motor brake spring 60mm for ATV Quad Dirt Bike","description":"\u003ch2\u003eMoturo 60 mm Brake Tension Spring for ATV, Quad, Pitbike, and Dirt Bike\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo tension spring for ATV\/Quad, Pitbike, and Dirt Bike brakes (universal item) — returns the cable to position after replacing the brake drum or brake lever. Total length 60 mm, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe tension spring pulls the brake lever or brake drum back to the starting position after the brake cable is released. Without this reset, the brake will drag or the lever will remain stuck. Total length 60 mm according to the data sheet, universal item.\u003c\/p\u003e\n\u003cp\u003eFits common ATV, Quad, and Pitbike brakes with this design and a 60 mm span. Please compare the length and hook geometry with your original part before ordering.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with a screwdriver and needle-nose pliers.\u003c\/p\u003e\n\u003cp\u003eTension spring for your ATV, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Facts\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eTotal length 60 mm according to the data sheet\u003c\/li\u003e\n\n\u003cli\u003eTension spring for resetting the brake lever or brake drum\u003c\/li\u003e\n\n\u003cli\u003eUniversal item for ATV, Quad, and Pitbike brakes with this design\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes – Please Read\u003c\/h3\u003e\n\u003cp\u003eRegistration-free spare\/wear part; the replacement does not require legal registration. Compare the length and hook geometry with your original part before ordering.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eScrewdriver\u003c\/li\u003e\n\n\u003cli\u003eNeedle-nose pliers\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of Delivery\u003c\/h3\u003e\n\u003cp\u003e1 × 60 mm Brake Tension Spring. Not included: tools, brake cable.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the spring fit every ATV or Quad brake?\u003c\/strong\u003e\u003cbr\u003eNo. Please compare the length and hook geometry with your original part before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the component need to be registered?\u003c\/strong\u003e\u003cbr\u003eNo. This spare\/wear part does not require registration; appropriate dimensions, design, and correct installation are important.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the spring attached?\u003c\/strong\u003e\u003cbr\u003eUsing needle-nose pliers to hook it into the two mounting points on the brake lever and brake cable.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo 60 mm Brake Tension Spring for ATV, Quad, Pitbike, and Dirt Bike (universal item). Tension spring for resetting the brake lever or brake drum. Total length 60 mm, ready for installation. Registration-free spare\/wear part; the replacement does not require legal registration. \u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712812773710,"sku":"6235402","price":2.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Feder-Bremse-60mm-fuer-ATV--Quad--Dirt--Bi.jpg?v=1788885052"},{"product_id":"moturo-6235403","title":"Moturo brake rod rod rear drum brake 380mm for 200cc ATV Quad","description":"\u003ch2\u003eMoturo Brake Rod for 200cc ATVs and Quads with Rear Drum Brake\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo brake rod for the rear drum brake on 200cc Chinese ATVs or quads — the first component to be replaced in the event of wear or crash damage. 380 mm length, galvanized, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brake rod transfers the force from the brake pedal directly to the drum brake on the rear wheel. Total length approx. 380 mm, hole diameter approx. 6 mm, galvanized against corrosion and splash water. The return spring is already fitted, so there is no need for pre-assembly.\u003c\/p\u003e\n\u003cp\u003eUniversally suitable for various 200cc Chinese ATVs and quads with a rear drum brake. Before installation, compare the length and hole diameter with your original part; if they match, the rod will also fit other engine displacement classes with the same geometry.\u003c\/p\u003e\n\u003cp\u003eCan be replaced in about half an hour with a wrench and new cotter pins.\u003c\/p\u003e\n\u003cp\u003eBrake rod for ATVs and quads, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eTotal length approx. 380 mm\u003c\/li\u003e\n\n\u003cli\u003eHole diameter approx. 6 mm at both ends\u003c\/li\u003e\n\n\u003cli\u003eGalvanized against corrosion and splash water\u003c\/li\u003e\n\n\u003cli\u003eReturn spring already pre-assembled\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eComponent for race and off-road use. No ABE\/StVZO approval. Not for use on public roads.\u003c\/p\u003e\n\u003cp\u003eUniversal part for 200cc Chinese ATVs and quads — compare total length and hole diameter with the original part before ordering. The rod will not fit if the geometry is different.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eWrench set in common sizes\u003c\/li\u003e\n\n\u003cli\u003eCotter pins or locking pins (new parts recommended)\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × brake rod 380 mm galvanized with pre-assembled return spring. Not included: cotter pins, locking pins, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the rod fit every 200cc Chinese quad?\u003c\/strong\u003e\u003cbr\u003eNot necessarily. Compare the total length and hole diameter with the original part before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the brake rod street-legal?\u003c\/strong\u003e\u003cbr\u003eNo. Not for use on public roads; component for off-road and race use only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre cotter pins or locking pins included?\u003c\/strong\u003e\u003cbr\u003eNo. Obtain cotter pins separately; new parts are recommended.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo brake rod 380 mm with pre-assembled return spring, galvanized, for the rear drum brake of 200cc Chinese ATVs and quads. Universal part — compare length and hole diameter with the original part. Race and off-road use, no StVZO approval.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712812839246,"sku":"6235403","price":7.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremsstange-Stange-Trommelbremse-hinten-38.jpg?v=1788885053"},{"product_id":"moturo-6235405","title":"Moturo brake lever 200mm complete with lever assembly - for 22mm handlebars - ATV Quad","description":"\u003ch2\u003eMoturo Brake Lever Handle Assembly 200 mm for ATV\/Quad\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo brake lever handle assembly for your ATV\/Quad — complete brake assembly in OEM quality with parking brake. 200 mm lever, 22 mm handlebar, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brake lever handle assembly is mounted on the handlebar and operates the brake of your ATV\/Quad via the lever. The assembly is designed universally for handlebars with a 22 mm diameter and features an integrated parking brake with a lock, allowing the vehicle to be parked securely. The lever itself measures 200 mm in length.\u003c\/p\u003e\n\u003cp\u003eThe electrical connection for the brake light switch is made via two cables in green and black. The assembly is manufactured in OEM quality.\u003c\/p\u003e\n\u003cp\u003eReplace in about half an hour with a hex key set and a slotted screwdriver.\u003c\/p\u003e\n\u003cp\u003eBrake lever handle assembly for ATV\/Quad, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e200 mm brake lever with parking brake as a lock\u003c\/li\u003e\n\n\u003cli\u003eUniversal for handlebars with 22 mm diameter\u003c\/li\u003e\n\n\u003cli\u003eConnection for brake light switch via two cables (green\/black)\u003c\/li\u003e\n\n\u003cli\u003eComplete assembly in OEM quality\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes – Please Read\u003c\/h3\u003e\n\u003cp\u003eRegistration-free replacement\/wear part; replacement does not require entry in vehicle documents. Fits only handlebars with a 22 mm diameter; deviating clamp diameters are not compatible.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in standard sizes\u003c\/li\u003e\n\n\u003cli\u003eSlotted screwdriver\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of Delivery\u003c\/h3\u003e\n\u003cp\u003e1 × Brake lever handle assembly complete with 200 mm brake lever and parking brake (ready for installation). Not included: brake cable, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the assembly fit my handlebar?\u003c\/strong\u003e\u003cbr\u003eOnly on handlebars with a 22 mm diameter. Deviating clamp diameters are not compatible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the parking brake work?\u003c\/strong\u003e\u003cbr\u003eVia a lock that fixes the brake lever in the pulled position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the two cables in green and black for?\u003c\/strong\u003e\u003cbr\u003eConnection for the brake light switch; the appropriate connector type varies depending on the vehicle.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo brake lever handle assembly with 200 mm lever and parking brake for ATV\/Quad. Universal for handlebars with 22 mm diameter, connection for brake light switch via two cables (green\/black). Registration-free replacement\/wear part; replacement does not require entry in vehicle documents. \u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712812937550,"sku":"6235405","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremshebel-200mm-kpl-mit-Griffarmatur-fuer.jpg?v=1788885053"},{"product_id":"moturo-6235406","title":"Moturo brake master cylinder with 120mm lever, complete handlebar assembly - for 22mm handlebars - ATV Quad","description":"\u003ch2\u003eMoturo brake master cylinder with lever assembly and 120mm lever for ATV\/Quad\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo brake master cylinder with complete lever assembly for your ATV\/Quad — for replacements or modifications, this complete brake control unit is ready to install. 120mm lever, 22mm handlebar clamp, integrated parking brake, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brake master cylinder is mounted on the handlebar and generates hydraulic brake pressure. 120mm long brake lever, handlebar clamp for 22mm standard handlebars. The integrated parking brake locks the lever when pulled. Connection is via two cables.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with an Allen key set and a socket wrench for the handlebar clamp.\u003c\/p\u003e\n\u003cp\u003eBrake master cylinder for your ATV\/Quad, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e120mm brake lever length\u003c\/li\u003e\n\n\u003cli\u003e22mm handlebar clamp for standard handlebars\u003c\/li\u003e\n\n\u003cli\u003eIntegrated parking brake with lever lock\u003c\/li\u003e\n\n\u003cli\u003eConnection via two cables, master cylinder in OEM quality\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eReplacement\/wear part exempt from registration; no official approval or entry required. Universal item — please compare dimensions with the product image before replacement.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eAllen key set in common sizes\u003c\/li\u003e\n\n\u003cli\u003eSocket wrench for the handlebar clamp\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × brake master cylinder with lever assembly, brake lever, and parking brake (ready for installation). Not included: brake line, brake fluid, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the master cylinder fit every 22mm handlebar?\u003c\/strong\u003e\u003cbr\u003eYes, the handlebar clamp is designed for 22mm standard handlebars — the dimension used on most ATVs and quads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOn which side is the brake master cylinder mounted?\u003c\/strong\u003e\u003cbr\u003eUniversal — the master cylinder can be mounted on the right or left, depending on which brake system you are operating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the component need to be registered?\u003c\/strong\u003e\u003cbr\u003eNo. This replacement\/wear part does not require registration; what is important is proper dimensions, design, and correct installation.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo brake master cylinder with complete lever assembly for your ATV\/Quad. 120mm brake lever, 22mm handlebar clamp, integrated parking brake, master cylinder in OEM quality, connection via two cables, ready to install.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712812970318,"sku":"6235406","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremspumpe-mit-Hebel-120mm-kpl-Griffarmatu.jpg?v=1788885055"},{"product_id":"moturo-6235411","title":"Moturo brake lever 132mm cpl. with handle fitting - for 22mm handlebars - ATV Quad","description":"\u003ch2\u003eMoturo Brake Lever with Handlebar Fitting 132 mm for ATV and Quad with 22 mm Handlebars\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo brake lever complete with handlebar fitting for your ATV or quad with 22 mm handlebars — the standard replacement after a fall or broken lever. 132 mm lever length, OEM quality, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe handlebar fitting sits on the handlebar and guides the brake cable to the front wheel brake. The lever measures 132 mm and corresponds to the common factory standard in OEM quality. The clamp mount fits all handlebars with a 22 mm outer diameter, the standard size for ATVs and quads.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about an hour using a hex key set and a socket wrench for the clamping bolt on the handlebar. Detach the old brake cable, loosen the fitting, mount the new unit, and reattach the cable.\u003c\/p\u003e\n\u003cp\u003eBrake lever fitting for your ATV or quad, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e132 mm lever length in OEM quality\u003c\/li\u003e\n\n\u003cli\u003eClamp mount for handlebars with 22 mm outer diameter\u003c\/li\u003e\n\n\u003cli\u003eComplete unit consisting of brake lever and handlebar fitting\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eRegistration-free replacement\/wear part; the replacement does not require registration. Not suitable for handlebars with diameters other than 22 mm.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in common sizes\u003c\/li\u003e\n\n\u003cli\u003eSocket wrench for the clamping bolt\u003c\/li\u003e\n\n\u003cli\u003eTorque wrench\u003c\/li\u003e\n\n\u003cli\u003eAbout one hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × Brake lever complete with handlebar fitting (ready for installation). Not included: brake cable, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the fitting fit on 7\/8 inch handlebars?\u003c\/strong\u003e\u003cbr\u003eYes, 22 mm corresponds to approximately 7\/8 inch. Compare the measurement on your own handlebar before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the component need to be registered?\u003c\/strong\u003e\u003cbr\u003eNo. This replacement\/wear part does not require registration; what matters are the correct dimensions, design, and proper installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the brake cable included?\u003c\/strong\u003e\u003cbr\u003eNo, the cable must be ordered separately or taken from the old part.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo brake lever complete with handlebar fitting for ATV and quad with 22 mm handlebars. 132 mm lever length in OEM quality, clamp mount for 22 mm outer diameter, ready to install. Registration-free replacement\/wear part; the replacement does not require registration. \u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712813232462,"sku":"6235411","price":12.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremshebel-132mm-kpl-mit-Griffarmatur-fuer.jpg?v=1788885056"},{"product_id":"moturo-6235412","title":"Moturo brake lever 130mm cpl. with handlebar fitting - for 22mm handlebars - ATV Quad","description":"\u003ch2\u003eMoturo brake lever complete with handlebar assembly 130 mm for ATV and Quad\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo brake lever set complete with handlebar assembly for your ATV\/Quad with 22 mm handlebars — the lever you need after a fall or trail ride. 130 mm lever length, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lever is mounted on the right side of the handlebar and operates the brake cable for the front brake. The assembly fits handlebars with a 22 mm diameter; the lever itself measures 130 mm and is of OEM quality. The integrated brake light switch is connected via two cables, green and black, and signals braking to the taillight.\u003c\/p\u003e\n\u003cp\u003eUniversal use on ATVs, quads, and dirt bikes with standard 22 mm handlebars. Before replacing, compare the lever mount and brake cable connection with the photo on the product page.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with a hex key set and a Phillips screwdriver.\u003c\/p\u003e\n\u003cp\u003eBrake lever set for ATV and quad, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLever 130 mm length, assembly for 22 mm handlebar diameter\u003c\/li\u003e\n\n\u003cli\u003eIntegrated brake light switch, two-cable connection (green\/black)\u003c\/li\u003e\n\n\u003cli\u003eOEM quality, OE geometry\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (general operating permit) required. Universal item — compare lever mount, brake cable connection, and handlebar diameter with the product photo before ordering.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in common sizes\u003c\/li\u003e\n\n\u003cli\u003ePhillips screwdriver\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × brake lever complete with handlebar assembly (lever 130 mm, for 22 mm handlebars, with integrated brake light switch). Not included: brake cable, handlebar, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the assembly fit every 22 mm handlebar?\u003c\/strong\u003e\u003cbr\u003eIt fits standard handlebars with a 22 mm diameter at the lever mount. Before ordering, measure the handlebar diameter at the mounting point.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich side — left or right?\u003c\/strong\u003e\u003cbr\u003eOn the right side of the handlebar for the front brake.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the brake light switch connected?\u003c\/strong\u003e\u003cbr\u003eVia two cables, green and black, to the brake light circuit.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo brake lever complete with handlebar assembly for ATV and Quad with 22 mm handlebars. 130 mm lever, integrated brake light switch via two cables (green\/black), OEM quality, ready to install.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712813527374,"sku":"6235412","price":12.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremshebel-130mm-kpl-mit-Griffarmatur-fuer.jpg?v=1788885057"},{"product_id":"moturo-6235415","title":"Moturo brake cable cpl. for Loncin 250cc ATV Quad","description":"\u003ch2\u003eMoturo front drum brake cable for Loncin 250cc ATV\/Quad\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo brake cable for the front drum brake of your Loncin 250cc ATV\/Quad — the wear part that should be replaced when changing the brake shoes. Brake cable with spring and nipple, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brake cable transfers the manual force from the brake lever to the actuating arm of the front drum brake. The scope of delivery includes the brake cable, spring, and nipple for the drum brake actuating arm — pre-assembled and ready for installation.\u003c\/p\u003e\n\u003cp\u003eThe cable fits the Loncin 250cc and various other 250cc ATVs and quads. When changing the brake shoes, the brake cable is usually replaced at the same time because the cable often stretches or runs roughly over time.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour using a screwdriver, pliers, and a wrench.\u003c\/p\u003e\n\u003cp\u003eBrake cable for Loncin 250cc ATV\/Quad, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Figures\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBrake cable with spring and nipple for the drum brake actuating arm\u003c\/li\u003e\n\n\u003cli\u003eOEM quality for the front drum brake\u003c\/li\u003e\n\n\u003cli\u003eSuitable for Loncin 250cc and various 250cc ATVs and quads\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (general operating permit) required. Before ordering, please compare the lengths and nipple shape with the original cable, as the cable is used on various 250cc ATVs and quads.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eScrewdriver\u003c\/li\u003e\n\n\u003cli\u003ePliers\u003c\/li\u003e\n\n\u003cli\u003eWrench for the mounting nut\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × brake cable complete with brake wire, spring, and nipple for the drum brake actuating arm. Not included: tools, brake lever.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the brake cable also fit other 250cc ATVs?\u003c\/strong\u003e\u003cbr\u003eOften yes, but please compare the lengths and nipple shape with the original cable before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original spare part design, no separate ABE required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I also replace the cable when changing the brake shoes?\u003c\/strong\u003e\u003cbr\u003eYes, that is standard practice. The cable stretches with the brake shoes and often starts running roughly.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo brake cable for the front drum brake of your Loncin 250cc ATV\/Quad. Brake cable with spring and nipple for the drum brake actuating arm, ready to install.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712813723982,"sku":"6235415","price":13.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremszug-kpl-fuer-Loncin-250ccm-ATV-3.jpg?v=1788885058"},{"product_id":"moturo-6235416","title":"Moturo brake cable 1090mm for 150cc to 250cc ATV Quad","description":"\u003ch2\u003eMoturo Brake Cable 1090 mm for ATV\/Quad with Drum Brake\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo brake cable for ATV\/Quad with drum brake (150 to 250 cc) — a wear part that needs to be replaced every few years. 1090 mm cable length, 90 mm housing, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brake cable transfers manual force from the brake lever to the rear wheel drum brake. The cable measures approximately 1090 mm, and the housing measures approximately 90 mm. A solder nipple and outer housing are included. Worn or snapped original cables can be replaced one-to-one with this part.\u003c\/p\u003e\n\u003cp\u003eBefore installation, unhook the old cable housing, guide the new cable through the lever and brake anchor plate, and adjust the play at the lever to the specified value.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour using a hex key set and a wrench.\u003c\/p\u003e\n\u003cp\u003eBrake cable for ATV\/Quad, manufactured by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Figures\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCable length approx. 1090 mm, housing approx. 90 mm\u003c\/li\u003e\n\n\u003cli\u003eIncludes outer housing and solder nipple\u003c\/li\u003e\n\n\u003cli\u003eSuitable for quads with drum brakes, 150 to 250 cc\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes – please read\u003c\/h3\u003e\n\u003cp\u003eRegistration-free replacement\/wear part; replacement does not require entry in vehicle documents. Not suitable for quads with disc brakes or significantly smaller displacement.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in common sizes\u003c\/li\u003e\n\n\u003cli\u003eWrench for the mounting nuts\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of Delivery\u003c\/h3\u003e\n\u003cp\u003e1 × Brake cable for drum brake, including outer housing and solder nipple. Not included: tools, lock nuts, lubricants.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable fit on quads with significantly smaller displacement?\u003c\/strong\u003e\u003cbr\u003eNo, the cable length differs. Compare measurements with the product image.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the component need to be registered?\u003c\/strong\u003e\u003cbr\u003eNo. This replacement\/wear part does not require registration; matching dimensions, design, and correct installation are what matter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I measure if the length fits?\u003c\/strong\u003e\u003cbr\u003eRemove the original cable and measure the wire from the lever end to the nipple. Then compare it with the approximately 1090 mm.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo brake cable 1090 mm for ATV\/Quad with drum brake, 150 to 250 cc. Includes outer housing and solder nipple, ready for installation. No ABE required, registration-free replacement\/wear part; replacement does not require entry in vehicle documents. \u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712813756750,"sku":"6235416","price":12.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremszug-Seilzug-1090mm-fuer-150ccm-bis-3.jpg?v=1788885059"},{"product_id":"moturo-6235417","title":"Moturo Brake Cable 880mm for 150cc to 250cc ATV Quad","description":"\u003ch2\u003eMoturo Brake Cable 880 mm for ATV\/Quad 150-250 cc\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo 880 mm brake cable for your 150-250 cc ATV\/Quad — after extended operation, this is the most common wear part on the drum brake. Includes housing and solder nipple, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brake cable transmits hand force from the brake lever on the handlebar to the rear drum brake. According to the description, the cable length is approximately 880 mm, and the cable comes with a housing and solder nipple. Suitable for ATVs and quads with 150 to 250 cc.\u003c\/p\u003e\n\u003cp\u003eBefore installation, detach the old cable, insert the new one, and fit the solder nipple into the brake lever. Then, adjust the play using the adjuster ring. Replacement takes about half an hour with a hex key set and a socket wrench for the fastening nut.\u003c\/p\u003e\n\u003cp\u003eBrake cable for ATV\/Quad, manufactured by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCable length approx. 880 mm according to description\u003c\/li\u003e\n\n\u003cli\u003eIncludes housing and solder nipple\u003c\/li\u003e\n\n\u003cli\u003eSuitable for ATVs and quads with 150 to 250 cc engine displacement\u003c\/li\u003e\n\n\u003cli\u003eUniversal part, compare dimensions before installation\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes – please read\u003c\/h3\u003e\n\u003cp\u003eRegistration-free replacement\/wear part; no entry in vehicle documents required for replacement. Universal part — compare the length and nipple shape with the original brake cable of your ATV\/Quad before ordering.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in standard sizes\u003c\/li\u003e\n\n\u003cli\u003eSocket wrench for the fastening nut\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of Delivery\u003c\/h3\u003e\n\u003cp\u003e1 × Brake cable 880 mm with housing and solder nipple. Not included: tools, adjuster ring, brake lever.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the length of the brake cable?\u003c\/strong\u003e\u003cbr\u003eAccording to the description, about 880 mm. Compare with the old cable of your ATV\/Quad before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this cable fit every quad with 150 to 250 cc?\u003c\/strong\u003e\u003cbr\u003eIt is a universal part. Compare the length and nipple shape with your original brake cable before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the component need to be registered?\u003c\/strong\u003e\u003cbr\u003eNo. This replacement\/wear part does not require registration; what matters are the correct dimensions, design, and proper installation.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo brake cable 880 mm for ATV\/Quad with 150 to 250 cc. Includes housing and solder nipple, ready for installation. Universal part.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712813920590,"sku":"6235417","price":12.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremszug-Seilzug-880mm-fuer-150ccm-bis-3.jpg?v=1788885059"},{"product_id":"moturo-6235488","title":"Moturo brake light switch 260mm rear foot brake for ATV Quad","description":"\u003ch2\u003eMoturo Rear Foot Brake Light Switch 260 mm for ATV and Quad\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo brake light switch for the rear foot brake of your ATV or quad — universally applicable as a replacement or upgrade. 260 mm cable with two plug contacts, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe switch detects the actuation of the rear foot brake and triggers the brake light. The shape and design correspond to the original part; connection is via two plugs with a cable length of 260 mm.\u003c\/p\u003e\n\u003cp\u003eUniversal item — fits many ATV and quad models with standard plug connections. Before purchasing, compare the plug shape and mounting dimensions with your old switch.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour using a screwdriver and a socket wrench for the mounting nut.\u003c\/p\u003e\n\u003cp\u003eBrake light switch for your ATV or quad, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e260 mm cable length from switch housing\u003c\/li\u003e\n\n\u003cli\u003eConnection via two pre-assembled plug contacts\u003c\/li\u003e\n\n\u003cli\u003eShape and design according to original part\u003c\/li\u003e\n\n\u003cli\u003eUniversal for ATV and quad with rear foot brake\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eRegistration-free replacement\/wear part; the replacement does not require entry in the vehicle documents. Universal item: Compare plug shape and mounting dimensions with the old switch before purchasing, as not every model follows the same dimensions.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eScrewdriver\u003c\/li\u003e\n\n\u003cli\u003eSocket wrench for the mounting nut\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × brake light switch with 260 mm cable and two plug contacts. Not included: mounting hardware, mating connectors, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the switch fit my ATV or quad?\u003c\/strong\u003e\u003cbr\u003eUniversal item. Compare plug shape and mounting dimensions with the old switch before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the switch also work on the handbrake?\u003c\/strong\u003e\u003cbr\u003eDesigned for the rear foot brake. Can only be used on the handbrake if the geometry matches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the component need to be registered?\u003c\/strong\u003e\u003cbr\u003eNo. This replacement\/wear part does not require registration; what is important is proper dimensions, design, and correct installation.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo brake light switch for the rear foot brake of ATVs and quads. 260 mm cable with two plug contacts, shape and design according to original part. Universal item, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712841052494,"sku":"6235488","price":8.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremslichtschalter-260mm-hinten-Fussbrem_1.jpg?v=1788885084"},{"product_id":"moturo-6235674","title":"Moturo front brake cable compatible with Honda CRF 80F XR 80 XR 80R","description":"\u003ch2\u003eMoturo Front Brake Cable for Honda CRF 80 F \/ XR 80 \/ XR 80 R\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo brake cable for the front brake of your Honda CRF 80 F 04-09, XR 80 83-84, and XR 80 R 85-03 — the wear part that is usually the first thing to give out on your handlebars after years of use. Dimensions match the original cable, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brake cable transfers the hand force from the brake lever to the front wheel drum brake. The lengths and end pieces follow the original cable design of the CRF 80 F (model years 2004 to 2009), XR 80 (model years 1983 to 1984), and XR 80 R (model years 1985 to 2003).\u003c\/p\u003e\n\u003cp\u003eCan be replaced in about half an hour using a screwdriver and an open-ended wrench for the lock nut.\u003c\/p\u003e\n\u003cp\u003eBrake cable for the CRF 80 F and XR 80, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eDimensions and end pieces match the original cable for the CRF 80 F, XR 80, and XR 80 R\u003c\/li\u003e\n\n\u003cli\u003eFor the front drum brake (hand lever to brake anchor)\u003c\/li\u003e\n\n\u003cli\u003ePlay adjustment via the adjustment screw on the brake lever\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes – Please Read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (general operating permit) required. Before ordering, verify the production period and model variant against the photo on the product page.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eScrewdriver\u003c\/li\u003e\n\n\u003cli\u003eOpen-ended wrench for the lock nut\u003c\/li\u003e\n\n\u003cli\u003eA little cable grease for the new cable\u003c\/li\u003e\n\n\u003cli\u003eApproximately half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of Delivery\u003c\/h3\u003e\n\u003cp\u003e1 × front brake cable (ready for assembly). Not included: cable grease, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable also fit the CRF 80 F from 2010 onwards?\u003c\/strong\u003e\u003cbr\u003eNo, the confirmed production period ends in 2009; for later models, compare with the photo on the product page before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV inspection\/registration?\u003c\/strong\u003e\u003cbr\u003eNo. Brake cable is an original spare part design, no separate ABE required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I adjust the brake play?\u003c\/strong\u003e\u003cbr\u003eVia the adjustment screw on the brake lever; loosen the lock nut, adjust the play, and tighten the lock nut again.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo front brake cable for Honda CRF 80 F (model years 2004 to 2009), XR 80 (model years 1983 to 1984), and XR 80 R (model years 1985 to 2003). Dimensions match the original cable, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712861040974,"sku":"6235674","price":14.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremszug-Seilzug-vorne-fuer-Honda-CRF-80_1.jpg?v=1788885188"},{"product_id":"moturo-6235692","title":"Moturo front brake cable for Suzuki LTF 150 Quad Runner","description":"\u003ch2\u003eMoturo front brake cable for Suzuki LTF 150 Quad Runner 91-03\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo front brake cable for your Suzuki LTF 150 Quad Runner (model years 91-03) — the wear part that becomes stiff or snaps after years of use in sand and fields. Original dimensions, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brake cable transfers the lever movement from the handlebars to the front axle drum of your quad. The dimensions correspond to the original cable for the LTF 150 Quad Runner (model years 1991 to 2003), and the ferrules fit into the brake lever mount and drum mount without the need for adjustment. In daily quad use, involving sand, spray, and mud, the cable is most prone to snapping or jamming — that is when a replacement is needed.\u003c\/p\u003e\n\u003cp\u003eCan be replaced in about half an hour with an open-ended wrench for the lock nut and adjusting screw, along with some brake grease for the new inner cable.\u003c\/p\u003e\n\u003cp\u003eBrake cable for the LTF 150 Quad Runner, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eDimensions correspond to the original cable for the LTF 150 Quad Runner\u003c\/li\u003e\n\n\u003cli\u003eFerrules fit the brake lever mount and the front axle drum mount\u003c\/li\u003e\n\n\u003cli\u003eOriginal equipment manufacturer quality according to manufacturer specifications\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant information – please read\u003c\/h3\u003e\n\u003cp\u003eReplacement\/wear part that does not require registration; no legal documentation needed for replacement. Fits the LTF 150 Quad Runner (model years 1991 to 2003) as well as the LTF 160 (model years 1997 to 2003) according to the manufacturer's list. For other models, compare the length and connections with the product image before ordering.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eOpen-ended wrench for lock nut and adjusting screw\u003c\/li\u003e\n\n\u003cli\u003eSome brake grease for the new inner cable\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × front brake cable (ready to install). Not included: brake grease, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable also fit the LTF 160?\u003c\/strong\u003e\u003cbr\u003eAccording to the manufacturer's list, the cable also fits the LTF 160 (model years 1997 to 2003). Compare the length and connections with the product image before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this part need to be registered?\u003c\/strong\u003e\u003cbr\u003eNo. This replacement\/wear part does not require registration; what matters are correct dimensions, design, and proper installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat should I do if the lever sticks after installation?\u003c\/strong\u003e\u003cbr\u003eBack off the adjusting screw on the lever, grease the new cable, and adjust the play according to the workshop manual.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo front brake cable for Suzuki LTF 150 Quad Runner (model years 1991 to 2003). Dimensions correspond to the original cable, ferrules fit the brake lever mount and the front axle drum mount, ready to install.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712863301966,"sku":"6235692","price":29.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremszug-vorne-fuer-Suzuki-LTF-150-Quad-Ru.jpg?v=1788885202"},{"product_id":"moturo-6235733","title":"Moturo front brake cable 90mm for Yamaha PW 50","description":"\u003ch2\u003eMoturo front brake cable 90mm for Yamaha PW 50 82-13\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo front brake cable for your Yamaha PW 50 (MY 82-13) — the Bowden cable for the front brake that is most frequently replaced due to wear or sluggish movement. 90mm specification, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brake cable transmits the braking force from the hand lever to the front brake of the PW 50. The 90mm specification fits the PW 50 factory pattern; cable and housing are of OEM quality. Routing, lever play, and locking follow the PW 50 workshop manual.\u003c\/p\u003e\n\u003cp\u003eInstallation takes about half an hour with a hex key set, a wrench for the lock nut, and a drop of sewing machine oil for the cable. Before tightening, adjust the lever play to the dimension specified in the manual, then actuate the front brake several times.\u003c\/p\u003e\n\u003cp\u003eBrake cable for the PW 50, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e90mm specification in the PW 50 factory pattern\u003c\/li\u003e\n\n\u003cli\u003eCable and housing in OEM quality\u003c\/li\u003e\n\n\u003cli\u003eTightening torques and play according to the PW 50 workshop manual\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (general operating permit) required. As a wear part, replacement does not require registration. For the Loncin PY 50, please compare the cable routing and end dimensions with the photo on the product page before ordering.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eStandard hex key set\u003c\/li\u003e\n\n\u003cli\u003eWrench for the lock nut\u003c\/li\u003e\n\n\u003cli\u003eA little sewing machine oil for the cable\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × front brake cable 90mm (ready to install). Not included: tools, lubricants.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable also fit the Loncin PY 50?\u003c\/strong\u003e\u003cbr\u003eBefore ordering, compare the end dimensions and cable routing with the photo on the product page.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Wear part in original spare part design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I adjust the lever play?\u003c\/strong\u003e\u003cbr\u003eUsing the adjustment screw on the brake lever and the lock nut at the end of the cable, play as per the PW 50 workshop manual.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo front brake cable 90mm for Yamaha PW 50 (model years 1982 to 2013). Bowden cable for the front brake, 90mm specification in the PW 50 factory pattern, cable and housing in OEM quality, ready to install.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712868151630,"sku":"6235733","price":19.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremszug-vorne-90mm-fuer-Yamaha-PW-50.jpg?v=1788885230"},{"product_id":"moturo-6235734","title":"Moturo rear brake cable 1200mm for Yamaha PW 50","description":"\u003ch2\u003eMoturo Rear Brake Cable 1200mm for Yamaha PW 50\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo rear brake cable 1200mm for your Yamaha PW 50 (MY 82-13) — a typical wear part, often seized or stiff after long periods of inactivity. 1200mm outer length, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brake cable transmits the manual force from the brake lever to the rear drum brake of the PW 50. The outer length is 1200mm, matching the factory dimensions for this platform, and the end fittings match the original hole pattern of the brake lever and brake cam.\u003c\/p\u003e\n\u003cp\u003eAlso suitable for the identical Loncin PY 50, with the same cable routing and identical end fittings.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour using an open-end wrench for the lock nut and a screwdriver for adjustment.\u003c\/p\u003e\n\u003cp\u003eBrake cable for the PW 50, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e1200mm outer length, PW 50 factory specification\u003c\/li\u003e\n\n\u003cli\u003eEnd fittings match original hole pattern for brake lever and brake cam\u003c\/li\u003e\n\n\u003cli\u003eAlso fits Loncin PY 50 (identical platform)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (general operating permit) required. Wear part — check the cable movement before installation; it must move smoothly. Adjust play after installation in accordance with the PW 50 workshop manual.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eOpen-end wrench for the lock nut\u003c\/li\u003e\n\n\u003cli\u003eScrewdriver for adjustment\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × rear brake cable, 1200mm outer length. Not included: tools, lubricants, lock sleeves.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable also fit the Loncin PY 50?\u003c\/strong\u003e\u003cbr\u003eYes, the PY 50 is identical in construction to the Yamaha PW 50, with the same cable routing and same end fittings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV inspection?\u003c\/strong\u003e\u003cbr\u003eNo. Original spare part design, wear part with factory dimensions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I check the correct length before ordering?\u003c\/strong\u003e\u003cbr\u003eCompare the 1200mm outer length with your old cable and the photo of the end fittings with the product image.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo rear brake cable 1200mm for Yamaha PW 50 (model years 1982 to 2013). 1200mm outer length, end fittings match the original PW 50 hole pattern, ready to install. Also fits the identical Loncin PY 50.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712868249934,"sku":"6235734","price":19.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremszug-hinten-1200mm-fuer-Yamaha-PW-50.jpg?v=1788885231"},{"product_id":"moturo-6235741","title":"Moturo brake shoe set for Yamaha PW 50","description":"\u003ch2\u003eMoturo Brake Shoe Set for Yamaha PW 50\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo brake shoe set for the drum brake of your Yamaha PW 50 (MY 82-13) — a wear part routinely replaced during servicing. Lining in OEM quality, can be used front and rear, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brake shoes sit in the front and rear drum brakes. The lining and geometry follow the original part, so that braking performance and design match the factory standard of the PW 50. Identical shoe for front and rear, no separate set required. Additionally fits Yamaha PW 80 (model years 1996 to 2003) and Loncin PY 50.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about an hour per axle using a socket wrench set, screwdriver, and a new split pin for the brake shoe axle.\u003c\/p\u003e\n\u003cp\u003eBrake shoe set for the PW 50, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Facts\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLining and geometry like the original PW 50 part\u003c\/li\u003e\n\n\u003cli\u003eIdentical shoe for front and rear drum brakes\u003c\/li\u003e\n\n\u003cli\u003eLining quality in OEM design\u003c\/li\u003e\n\n\u003cli\u003eFits Yamaha PW 50 (model years 1982 to 2013) and PW 80 (model years 1996 to 2003)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eThis brake part does not have ECE-R90 approval and is not approved for public road traffic. Designed for race\/off-road use.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSocket wrench set in common sizes\u003c\/li\u003e\n\n\u003cli\u003eScrewdriver\u003c\/li\u003e\n\n\u003cli\u003eNew split pin for the brake shoe axle\u003c\/li\u003e\n\n\u003cli\u003eAbout one hour per axle for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × Brake shoe set for one drum (can be used front or rear). Not included: split pin, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the set fit front and rear?\u003c\/strong\u003e\u003cbr\u003eYes, identical shoe for both PW 50 drums.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need two sets for both wheels?\u003c\/strong\u003e\u003cbr\u003eYes, one set per drum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the set have street approval?\u003c\/strong\u003e\u003cbr\u003eNo. Designed for race and off-road.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo brake shoe set for Yamaha PW 50 (model years 1982 to 2013) and PW 80 (1996 to 2003). Lining and geometry like original part, can be used front and rear in the drum brake, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712869101902,"sku":"6235741","price":13.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremsbackensatz-fuer-Yamaha-PW-50-3-1.jpg?v=1788885237"},{"product_id":"moturo-6235742","title":"Moturo drum brake for Yamaha PW 50","description":"\u003ch2\u003eMoturo front drum brake for Yamaha PW 50 82-13\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo front drum brake for your Yamaha PW 50 (model years 82-13) — a complete brake unit for after a crash or in case of wear. Carrier plate, shaft, brake arm, and pads ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe drum brake is located at the front and brakes via brake pads against the drum. The mounting follows the original hole pattern of the PW 50; tightening torques are in accordance with the PW 50 workshop manual. Also fits the Yamaha PW 80 (model years 1996 to 2003) and the Loncin PY 50. Scope of delivery includes carrier plate, shaft, brake arm, pads, and small parts.\u003c\/p\u003e\n\u003cp\u003eCan be replaced in about an hour using a socket wrench and torque wrench. The included springs and small parts are sufficient for the complete replacement.\u003c\/p\u003e\n\u003cp\u003eDrum brake for the PW 50, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Facts\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eComplete brake unit: carrier plate, shaft, brake arm, pads, springs, and small parts\u003c\/li\u003e\n\n\u003cli\u003eOE hole pattern of the PW 50, tightening torques according to the workshop manual\u003c\/li\u003e\n\n\u003cli\u003eFront carrier mount, black finish\u003c\/li\u003e\n\n\u003cli\u003eFits PW 50 (model years 1982 to 2013), PW 80 (model years 1996 to 2003), Loncin PY 50\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal replacement part design, no separate type approval (ABE) required. Compare the hole pattern, shaft length, and position of the brake arm with the product image before ordering.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSocket wrench for the axle nut\u003c\/li\u003e\n\n\u003cli\u003eAllen key set in common sizes\u003c\/li\u003e\n\n\u003cli\u003eTorque wrench\u003c\/li\u003e\n\n\u003cli\u003eAbout one hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × front drum brake complete with carrier plate, shaft, brake arm, brake pads, springs, and small parts. Not included: Bowden cable, axle nut, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the brake also fit the Yamaha PW 80?\u003c\/strong\u003e\u003cbr\u003eYes, the drum brake fits the PW 80 (model years 1996 to 2003) and the Loncin PY 50.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the brake pads already installed?\u003c\/strong\u003e\u003cbr\u003eYes, the pads are pre-assembled in the carrier plate. Springs and small parts are included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a technical inspection\/registration (TÜV)?\u003c\/strong\u003e\u003cbr\u003eNo. Original replacement part design with the OE hole pattern of the PW 50.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo front drum brake for Yamaha PW 50 (model years 1982 to 2013), PW 80, and Loncin PY 50. Complete brake unit with carrier plate, shaft, brake arm, pads, and springs, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712869265742,"sku":"6235742","price":24.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Trommelbremse-fuer-Yamaha-PW-50.jpg?v=1788885238"},{"product_id":"moturo-6235753","title":"Moturo rear brake shoes brake pads for Yamaha PW 80 PY 80","description":"\u003ch2\u003eMoturo rear brake shoes for Yamaha PW 80 \/ PY 80 91-11\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMoturo rear brake shoes for your Yamaha PW 80 \/ PY 80 (MY 91-11) — a wear part that should be replaced whenever you change the pads on your rear brake. Complete set with return springs, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brake shoes are located on the rear brake and transfer the braking force to the drum via the brake lever. Organic pads, identical in construction to the original brake shoes in OEM quality, in a complete set with return springs. Fits the PW 80 (model years 1991 to 2011) and PY 80 with identical drum geometry.\u003c\/p\u003e\n\u003cp\u003eCan be replaced in about half an hour with a hex key set, a socket wrench for the mounting nut, and a rubber mallet to loosen the drum.\u003c\/p\u003e\n\u003cp\u003eBrake shoes for your PW 80, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eComplete set of organic pads including return springs\u003c\/li\u003e\n\n\u003cli\u003eIdentical in construction to the original brake shoes in OEM quality\u003c\/li\u003e\n\n\u003cli\u003eDrum mount and pad geometry for the PW 80 \/ PY 80\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eThis brake component does not have ECE-R90 approval and is not approved for public road traffic. Designed for race\/off-road use. Check drum diameter and pad thickness against the product image before ordering.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in common sizes\u003c\/li\u003e\n\n\u003cli\u003eSocket wrench for the mounting nut\u003c\/li\u003e\n\n\u003cli\u003eRubber mallet to loosen the drum\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 set of brake shoes (2 pieces) with return springs. Not included: tools, drum cleaner, axle nuts.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDo these shoes also fit the PW 50?\u003c\/strong\u003e\u003cbr\u003eOnly the PW 50 from model year 2013 onwards uses the identical drum geometry. Check dimensions against the product image before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Wear part that does not require registration. Note the information regarding the lack of ECE-R90 approval.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen are the brake shoes worn out?\u003c\/strong\u003e\u003cbr\u003eWhen the pad thickness is below the minimum specified in the PW 80 workshop manual or if the braking performance decreases.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo rear brake shoes for Yamaha PW 80 and PY 80 (model years 1991 to 2011). Complete set of organic pads with return springs, identical to the original brake shoes in OEM quality, ready for installation. Race\/off-road use, no ECE-R90 approval.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712870576462,"sku":"6235753","price":10.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremsbacken--Bremsbelaege-hinten-fuer-Yama.jpg?v=1788885247"},{"product_id":"moturo-6235754","title":"Moturo brake shoes brake pads front for Yamaha PW 80 PY 80","description":"\u003ch2\u003eMoturo Front Brake Shoes for Yamaha PW 80 \/ PY 80\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMoturo front brake shoes for your Yamaha PW 80 \/ PY 80 (MY 91-06) — the most common wear-and-tear replacement for the front drum brake. Complete organic set with return springs, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brake shoes are located in the front drum brake and are pressed against the drum when the brake lever is pulled. Two return springs pull them back after release. Organic friction compound, identical in construction to the originals, manufactured in OEM quality. The PW 80 delivers 4.8 hp from 79 cc.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with a hex key set, socket wrench, and needle-nose pliers for the return springs. The pads cannot be machined or reworked — when worn, replace them completely, both sides together.\u003c\/p\u003e\n\u003cp\u003eBrake shoes for the Yamaha PW 80, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Figures\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eComplete set of front brake shoes with return springs\u003c\/li\u003e\n\n\u003cli\u003eOrganic friction compound, in OEM quality\u003c\/li\u003e\n\n\u003cli\u003eIdentical in construction to the originals, ready for installation\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (German operating permit) required. Complete set for the front wheel brake of the Yamaha PW 80 \/ PY 80 (model years 1991 to 2006). Before installation, compare the hole pattern and spring lengths with the product image.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in standard sizes\u003c\/li\u003e\n\n\u003cli\u003eSocket wrench for the wheel nut\u003c\/li\u003e\n\n\u003cli\u003eNeedle-nose pliers for the return springs\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × set of front brake shoes (2 pads with return springs). Not included: tools, cotter pins, wheel nut.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDo these brake shoes also fit the Yamaha PW 50?\u003c\/strong\u003e\u003cbr\u003eNo, the pad geometry and drum dimensions are different.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original spare part design in OEM quality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the pads fully functional immediately?\u003c\/strong\u003e\u003cbr\u003eOrganic and new — use caution during the first few brakings until the pads have seated properly against the drum.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo front brake shoes for Yamaha PW 80 \/ PY 80 (model years 1991 to 2006). Complete organic set with return springs, identical in construction to the originals, in OEM quality, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712870740302,"sku":"6235754","price":10.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremsbacken--Bremsbelaege-vorne-fuer-Yamah.jpg?v=1788885246"},{"product_id":"moturo-6235759","title":"Moturo complete rear drum brake for Yamaha PW 80","description":"\u003ch2\u003eMoturo complete rear drum brake for Yamaha PW 80 91-11\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo complete rear drum brake set for the Yamaha PW 80 91-11 — after sitting idle or due to wear, one of the most common replacement items on the kids' dirt bike. Brake anchor plate with brake shoes, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe drum brake is located on the rear wheel and stops the PW 80 via two brake shoes inside the drum. The brake anchor plate holds the brake shoes, actuating lever, and return spring; the brake cable attaches to the lever. The set is identical in design to the original equipment version for the PW 80 (model years 1991 to 2011) and also fits the PW 50 from model year 2013 onwards.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about an hour using a socket wrench set, torque wrench, and cotter pin puller.\u003c\/p\u003e\n\u003cp\u003eDrum brake for the PW 80, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBrake anchor plate with two brake shoes, actuating lever, and return spring\u003c\/li\u003e\n\n\u003cli\u003eIdentical in design to the original equipment version for the PW 80\u003c\/li\u003e\n\n\u003cli\u003eTightening torques according to the PW 80 workshop manual\u003c\/li\u003e\n\n\u003cli\u003eFits PW 80 (model years 1991 to 2011) and PW 50 from model year 2013 onwards\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (general operating permit) required. When installing, adjust the brake cable correctly and check the braking effect while stationary and during a slow test ride before the first trip.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSocket wrench set for the axle nut\u003c\/li\u003e\n\n\u003cli\u003eTorque wrench\u003c\/li\u003e\n\n\u003cli\u003eCotter pin puller\u003c\/li\u003e\n\n\u003cli\u003eAbout one hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × complete rear drum brake (brake anchor plate with brake shoes, actuating lever, and return spring pre-assembled). Not included: brake cable, cotter pin, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the drum brake also fit the PW 50?\u003c\/strong\u003e\u003cbr\u003eYes, according to the application list, the set fits the PW 50 from model year 2013 onwards. Compare the hole pattern with the photo on the product page before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo the brake shoes need to be bedded in?\u003c\/strong\u003e\u003cbr\u003eYes. Perform the first few rides at reduced speed, with several slow, gentle braking maneuvers to achieve full friction performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original spare part design, no separate ABE required.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo complete rear drum brake for Yamaha PW 80 (model years 1991 to 2011), also fits the PW 50 from model year 2013 onwards. Brake anchor plate with brake shoes, identical to original equipment version, ready to install.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712871330126,"sku":"6235759","price":79.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Trommelbremse-hinten-komplett-fuer-Yamaha.jpg?v=1788885250"},{"product_id":"moturo-6235760","title":"Moturo front drum brake complete for Yamaha PW 80","description":"\u003ch2\u003eMoturo complete front drum brake for Yamaha PW 80\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo complete front drum brake for your Yamaha PW 80 (MY 91-11) — the most common wear point on the front end of this small trail bike. Brake anchor plate with brake shoes, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe drum brake is located in the front wheel and provides the primary braking force at the front. The brake anchor plate and brake shoes come as a complete unit, identical to the original and in OEM quality. Fits Yamaha PW 80 (model years 1991 to 2011) as well as Yamaha PW 50 (model year 2013).\u003c\/p\u003e\n\u003cp\u003eWear on the PW is typically indicated by fading braking performance, grinding noises, or grooves in the drum — in this case, replacing the complete anchor plate with shoes is a cleaner solution than replacing individual parts.\u003c\/p\u003e\n\u003cp\u003eCan be replaced in about half an hour with a socket set and torque wrench.\u003c\/p\u003e\n\u003cp\u003eDrum brake for the PW, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eComplete set consisting of brake anchor plate and brake shoes\u003c\/li\u003e\n\n\u003cli\u003eIdentical to the original, OEM quality\u003c\/li\u003e\n\n\u003cli\u003eSuitable for PW 80 (model years 1991 to 2011) and PW 50 (model year 2013)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (general operating permit) required. When replacing the front brake system, observe the tightening torques according to the PW workshop manual and bed in the brake after installation before the bike is put back into use.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSocket set for the axle and mounting nuts\u003c\/li\u003e\n\n\u003cli\u003eTorque wrench\u003c\/li\u003e\n\n\u003cli\u003eApproximately half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × complete front drum brake, consisting of brake anchor plate and brake shoes (ready to install). Not included: brake cable, axle, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the drum brake also fit a PW 80 made before 1991?\u003c\/strong\u003e\u003cbr\u003ePlease compare dimensions and bolt pattern with the product image before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the brake shoes already mounted in the anchor plate?\u003c\/strong\u003e\u003cbr\u003eYes, the unit comes completely pre-assembled.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original spare part design, no separate ABE required.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo complete front drum brake for Yamaha PW 80 (model years 1991 to 2011) and PW 50 (model year 2013). Brake anchor plate with brake shoes in OEM quality, ready to install.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712871362894,"sku":"6235760","price":79.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Trommelbremse-vorne-komplett-fuer-Yamaha-P.jpg?v=1788885251"},{"product_id":"moturo-6235804","title":"Moturo brake caliper complete rear for Yamaha Grizzly YFM 660","description":"\u003ch2\u003eMoturo rear brake caliper for Yamaha Grizzly YFM 660 02-08\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo complete rear brake caliper for your Yamaha Grizzly YFM 660 02-08 (RP, RR, RS, FWA) — ready-to-install rear brake caliper in OEM quality, perfectly matching the original part. Includes brake pads, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brake caliper sits on the rear brake of the Grizzly YFM 660 (model years 2002 to 2008) and is a 1:1 replacement for the original part. The mounts, brake line connection, and pad geometry follow the OE design. Use tightening torques according to the Grizzly workshop manual. Also fits the FWA variants FP, FR, FS as well as RP, RR, RS.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about an hour using a hex key set, open-end wrenches, socket wrenches, a torque wrench, and a brake bleeding device. Fully bleed the brake fluid after installation and test the braking effect at a standstill and at walking pace before the first ride.\u003c\/p\u003e\n\u003cp\u003eRear brake caliper for your Grizzly YFM 660, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eRear brake caliper in OE design, ready to install\u003c\/li\u003e\n\n\u003cli\u003eTightening torques according to the Grizzly YFM 660 workshop manual\u003c\/li\u003e\n\n\u003cli\u003eBrake pads included\u003c\/li\u003e\n\n\u003cli\u003ePerfect fit for RP, RR, RS and FWA models FP, FR, FS\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal replacement part design, no separate ABE (general operating permit) required. Before ordering, please check the exact position on the vehicle — this part is exclusively for the rear brake. If in doubt, compare the bolt pattern and brake line connection on the vehicle with the product image.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in common sizes\u003c\/li\u003e\n\n\u003cli\u003eOpen-end and socket wrenches for the mounting bolts\u003c\/li\u003e\n\n\u003cli\u003eTorque wrench\u003c\/li\u003e\n\n\u003cli\u003eBrake bleeding device and collection container for brake fluid\u003c\/li\u003e\n\n\u003cli\u003eAbout one hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × rear brake caliper complete with brake pads, ready to install. Not included: brake line, brake fluid, mounting bolts, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre the brake pads included?\u003c\/strong\u003e\u003cbr\u003eYes, the brake caliper is supplied complete with suitable pads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original replacement part design, no separate ABE required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich brake fluid should be used?\u003c\/strong\u003e\u003cbr\u003eAccording to the Grizzly YFM 660 workshop manual (model years 2002 to 2008). Bleed completely after installation.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo rear brake caliper complete for Yamaha Grizzly YFM 660 (model years 2002 to 2008, RP\/RR\/RS and FWA models FP\/FR\/FS). OE-design rear brake caliper with brake pads, tightening torques according to the workshop manual, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712879882574,"sku":"6235804","price":169.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremssattel-kpl--hinten-fuer-Yamaha-Grizzl.jpg?v=1788885282"},{"product_id":"moturo-6235812","title":"Moturo Brake Caliper Set for Yamaha Grizzly 660 YFM 660 2002-2008","description":"\u003ch2\u003eMoturo Brake Caliper Set for Yamaha Grizzly 660\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo brake caliper set for your Yamaha Grizzly 660 ATV (YFM660, MY 02-08) — complete brake calipers as a central service package for the quad. Grizzly OE bolt pattern, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brake calipers guide the brake pads onto the brake disc and transfer the hydraulic pressure from the braking system to the friction surfaces. The set fits the Grizzly 660 YFM 660 FWA in the FP, FR, FS, FAT, and FAHT model versions, model years 2002 to 2008, with 41 hp and 660 cc. Mounts and connection dimensions follow the Grizzly's OE bolt pattern.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about an hour using a hex key set, socket wrench, and brake bleeding device.\u003c\/p\u003e\n\u003cp\u003eBrake caliper set for the Grizzly 660 ATV, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eComplete brake caliper set in original equipment design\u003c\/li\u003e\n\n\u003cli\u003eMounts and OE bolt pattern of the Grizzly 660\u003c\/li\u003e\n\n\u003cli\u003eFor YFM 660 FWA in the FP, FR, FS, FAT, FAHT model versions (model years 2002 to 2008)\u003c\/li\u003e\n\n\u003cli\u003e41 hp \/ 30 kW, 660 cc according to vehicle data\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal equipment design, no separate ABE (German operating permit) required. Brake pads and brake lines are not included and must be checked for fit and condition before installation. Tighten mounting bolts according to the Grizzly 660 workshop manual, then bleed the brake system.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in common sizes\u003c\/li\u003e\n\n\u003cli\u003eSocket wrench for the mounting bolts\u003c\/li\u003e\n\n\u003cli\u003eBrake bleeding device, collection container, and fresh brake fluid\u003c\/li\u003e\n\n\u003cli\u003eTorque wrench\u003c\/li\u003e\n\n\u003cli\u003eAbout one hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × Brake caliper set for the Grizzly 660 (complete, ready for installation). Not included: brake pads, brake lines, brake fluid, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre brake pads included in the delivery?\u003c\/strong\u003e\u003cbr\u003eNo. Please order brake pads separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the set also fit the Grizzly 700?\u003c\/strong\u003e\u003cbr\u003eNo, different braking system and mounting geometry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original equipment design, a direct replacement for the factory component.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo brake caliper set for Yamaha Grizzly 660 YFM 660 FWA (model years 2002 to 2008). Complete brake calipers in original equipment design, Grizzly OE bolt pattern, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712881258830,"sku":"6235812","price":199.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremssattel-Set-fuer-Yamaha-Grizzly-660-YF.jpg?v=1788885286"},{"product_id":"moturo-6235813","title":"Moturo front brake caliper set for Yamaha Rhino YXR 660","description":"\u003ch2\u003eMoturo Front Brake Caliper Set for Yamaha Rhino YXR 660\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo front brake caliper set for your Yamaha Rhino YXR 660 (MY 06) — a front brake set most frequently replaced due to wear and corrosion. Left and right brake calipers in OE design, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe set slows the front wheel via two brake calipers (left + right), which grip the front brake disc in pairs. Both brake calipers are manufactured in OE design; the hole pattern and mounts follow the Yamaha Rhino YXR 660 workshop manual (model year 2006).\u003c\/p\u003e\n\u003cp\u003eBefore ordering, compare the photo on the product page with your component — the mounting geometry, number of pistons, and brake line connection must match. After installation, bleed the brake system and check its function.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about an hour using a socket wrench set, hex key set, and torque wrench.\u003c\/p\u003e\n\u003cp\u003eBrake caliper set for your Rhino, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLeft and right brake calipers for the front brake\u003c\/li\u003e\n\n\u003cli\u003eHole pattern and mounts according to the Rhino YXR 660 workshop manual\u003c\/li\u003e\n\n\u003cli\u003ePairs gripping the front brake disc\u003c\/li\u003e\n\n\u003cli\u003eTightening torques and brake fluid according to workshop manual\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal equipment replacement design, no separate ABE (general operating permit) required. Before installation, compare dimensions, number of pistons, and brake line connection with the photo on the product page. After installation, bleed the brake system and check the function of the front brake.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSocket wrench set for the mounting bolts\u003c\/li\u003e\n\n\u003cli\u003eHex key set in standard sizes\u003c\/li\u003e\n\n\u003cli\u003eTorque wrench\u003c\/li\u003e\n\n\u003cli\u003eBrake fluid according to workshop manual\u003c\/li\u003e\n\n\u003cli\u003eAbout one hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of Delivery\u003c\/h3\u003e\n\u003cp\u003e1 × front right brake caliper, 1 × front left brake caliper. Not included: brake pads, brake lines, brake fluid, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the set fit other model years of the Rhino?\u003c\/strong\u003e\u003cbr\u003eConfirmed for model year 2006. For other model years, compare with the photo on the product page before ordering; different caliper geometry is possible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre brake pads included?\u003c\/strong\u003e\u003cbr\u003eNo. Please order brake pads separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration after installation?\u003c\/strong\u003e\u003cbr\u003eNo. Original equipment replacement design, no separate ABE required.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo front brake caliper set for Yamaha Rhino YXR 660 (model year 2006). Left and right brake calipers in OE design, hole pattern and mounts according to the Rhino YXR 660 workshop manual, ready to install.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712881389902,"sku":"6235813","price":199.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremssattel-Set-vorne-fuer-Yamaha-Rhino-YX.jpg?v=1788885287"},{"product_id":"moturo-6235832","title":"Moturo Brake Pad Set for 49cc Pocket Bike Dirt Bike","description":"\u003ch2\u003eMoturo Brake Pad Set for Pocket Bike, Dirt Bike and Mini Cross 49cc\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo brake pads for your 49cc pocket bike, dirt bike, or mini cross — a wear part that should be replaced regularly during service. Two pads, 27 × 18 mm, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pads fit into the brake shoe. Total length 27 mm, total width 18 mm according to manufacturer specifications — universal item, compare dimensions with your original shoe before ordering.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with a screwdriver and the appropriate wrench for the axle nut.\u003c\/p\u003e\n\u003cp\u003eBrake pads for pocket bikes and dirt bikes, manufactured by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eTotal length 27 mm, total width 18 mm according to manufacturer specifications\u003c\/li\u003e\n\n\u003cli\u003e1 set = 2 pads (fits per brake shoe)\u003c\/li\u003e\n\n\u003cli\u003eOEM quality according to manufacturer specifications\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eThis brake component does not have ECE-R90 approval and is not approved for public road traffic. Designed for race\/off-road use. Universal item — compare brake shoe dimensions before ordering, as pocket bikes and dirt bikes may have different mounts depending on the platform.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eScrewdriver\u003c\/li\u003e\n\n\u003cli\u003eAppropriate wrench for the axle nut\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e2 × brake pads (1 set, ready for mounting). Not included: brake shoe, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDo the pads fit every 49cc pocket bike?\u003c\/strong\u003e\u003cbr\u003eUniversal item — compare 27 × 18 mm dimensions with your brake shoe before ordering, as different mounts are used depending on the platform.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a registration?\u003c\/strong\u003e\u003cbr\u003eNo. Not for public road traffic — race\/off-road use only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the pads ECE-R90 approved?\u003c\/strong\u003e\u003cbr\u003eNo. Designed for race and off-road use, no German Road Traffic Licensing Regulations (StVZO) approval.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo brake pad set for 49cc pocket bike, dirt bike, and mini cross. Total length 27 mm, total width 18 mm, 1 set with 2 pads, ready for installation. Designed for race\/off-road use, no StVZO approval.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712884339022,"sku":"6235832","price":6.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremsbelaege-Set-fuer-49ccm-Pocket-Bike--D.jpg?v=1788885301"},{"product_id":"moturo-6235833","title":"Moturo brake pad set for 49cc pocket bike dirt bike","description":"\u003ch2\u003eMoturo Brake Pad Set for 49cc Pocket Bike, Dirt Bike and Mini Cross\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo brake pad set for 49cc pocket bikes, dirt bikes, and mini cross bikes (two-stroke) — the classic wear part for the front brake. 18 mm diameter, 5 mm pad thickness, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pad presses against the brake disc from the outside and is a wear part on the bike. The set includes 2 pieces (1 set) in original equipment manufacturer (OEM) quality, with an 18 mm diameter and 5 mm pad thickness.\u003c\/p\u003e\n\u003cp\u003eFits standard brake calipers on 49cc two-stroke pocket bikes, dirt bikes, and mini cross bikes. Clean the brake caliper and push back the piston before installation — this noticeably extends the service life of the new pads.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with a hex key set and small pliers.\u003c\/p\u003e\n\u003cp\u003eBrake pads for pocket bikes and dirt bikes, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e18 mm diameter, 5 mm pad thickness\u003c\/li\u003e\n\n\u003cli\u003eSet of 2 pieces (1 set) in OEM quality\u003c\/li\u003e\n\n\u003cli\u003eFits front or rear brake\u003c\/li\u003e\n\n\u003cli\u003eDesigned for 49cc pocket bikes, dirt bikes, and mini cross bikes\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eComponent for racing and off-road use. No ABE\/StVZO approval. Not for public road use. Before ordering, check the brake caliper and hole spacing against the product image.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in standard sizes\u003c\/li\u003e\n\n\u003cli\u003eSmall pliers for inserting the retaining clip\u003c\/li\u003e\n\n\u003cli\u003eTorque wrench\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × Brake pad set, consisting of 2 pieces (1 set). Not included: brake fluid, tools, mounting hardware.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDo these pads fit every 49cc pocket bike?\u003c\/strong\u003e\u003cbr\u003eCompare the brake caliper and hole spacing with the product image before ordering. Dimensions: 18 mm diameter, 5 mm pad thickness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need approval for the replacement?\u003c\/strong\u003e\u003cbr\u003eNo. Pocket bikes and dirt bikes are not street-legal; the component is designed for racing and off-road use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to bed in the pads?\u003c\/strong\u003e\u003cbr\u003eYes, apply the first few brakes gently. This ensures the pad and brake disc settle properly against each other.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo brake pad set for 49cc pocket bike, dirt bike and mini cross. 18 mm diameter, 5 mm pad thickness, 2 pieces (1 set) in OEM quality, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712884470094,"sku":"6235833","price":6.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremsbelaege-Set-fuer-49ccm-Pocket-Bike--D_d0a031b7-eb63-46f9-a331-cba77a649049.jpg?v=1788885302"},{"product_id":"moturo-6235834","title":"Moturo front brake caliper for pocket bike dirt bike","description":"\u003ch2\u003eMoturo front brake caliper for Pocket Bike, Dirt Bike and Minicross 49 cc\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo front brake caliper for Pocket Bike, Dirt Bike and Minicross with 49 cc two-stroke engine — a wear part that needs replacing due to age or after a crash. Bolt spacing 51 mm, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe brake caliper clamps the brake pads onto the brake disc of the front wheel brake and transfers the braking force from the lever to the front wheel. The bolt spacing for mounting on the fork leg is 51 mm, matching common hole patterns on Pocket Bikes, Dirt Bikes and Minicross bikes with 49 cc two-stroke engines. The scope of delivery includes the caliper with pre-installed brake pads in OEM quality.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with a hex key set and a socket wrench for the mounting bolts on the fork leg. When replacing, bleeding the brake system with fresh brake fluid is mandatory.\u003c\/p\u003e\n\u003cp\u003eBrake caliper for your Pocket Bike, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBolt spacing 51 mm at the caliper mounting\u003c\/li\u003e\n\n\u003cli\u003eSupplied fully pre-assembled with brake pads\u003c\/li\u003e\n\n\u003cli\u003eOEM quality for the front wheel brake\u003c\/li\u003e\n\n\u003cli\u003eFits common Pocket Bikes, Dirt Bikes and Minicross bikes with 49 cc two-stroke engine\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE required. Universal item: Before ordering, compare the bolt spacing, pad geometry, and brake line connection with your existing caliper based on the product image.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in common sizes\u003c\/li\u003e\n\n\u003cli\u003eSocket wrench for the mounting bolts on the fork leg\u003c\/li\u003e\n\n\u003cli\u003eTorque wrench\u003c\/li\u003e\n\n\u003cli\u003eBrake bleeding device or a second person to assist\u003c\/li\u003e\n\n\u003cli\u003eFresh brake fluid\u003c\/li\u003e\n\n\u003cli\u003eApproximately half an hour plus bleeding time\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × front brake caliper with pre-installed brake pads. Not included: brake fluid, mounting bolts, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the caliper fit my bike?\u003c\/strong\u003e\u003cbr\u003eUniversal item with 51 mm bolt spacing. Compare the hole pattern and pad geometry with your existing caliper based on the product image before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to bleed the system after replacement?\u003c\/strong\u003e\u003cbr\u003eYes. Replacing the caliper opens the brake system; you must bleed it with fresh brake fluid afterwards, otherwise there will be no pressure point at the lever.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the brake pads already installed?\u003c\/strong\u003e\u003cbr\u003eYes, the caliper comes with pre-installed brake pads in OEM quality, ready for installation upon delivery.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo front brake caliper for Pocket Bike, Dirt Bike and Minicross with 49 cc two-stroke engine. Bolt spacing 51 mm, with pre-installed brake pads in OEM quality, ready for installation. Universal item — verify hole pattern before ordering.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712884568398,"sku":"6235834","price":7.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Bremssattel-vorne-fuer-Pocket-Bike--Dirt-B.jpg?v=1788885303"}],"url":"https:\/\/moturo.eu\/en\/collections\/bremsen.oembed","provider":"MOTURO","version":"1.0","type":"link"}