{"title":"Controls, cables and grips","description":"\u003cp\u003eThrottle, clutch and choke cables, speedometer cables, control levers, throttle grips and grip sets.\u003c\/p\u003e","products":[{"product_id":"moturo-6235139","title":"Moturo throttle cable for TGB Delivery and Pegasus Express","description":"\u003ch2\u003eMoturo throttle cable for TGB 303 Delivery and Pegasus Sky 50 99-06\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo throttle cable for TGB 303 Delivery and Pegasus Sky 50 (MY 99-06) — the connection from the twist grip to the carburetor throttle valve. Dimensions and quality correspond to the original part, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable transmits the movement of the throttle grip to the throttle valve in the carburetor. The dimensions and inner cable correspond to the original part, so the routing on the handlebar and intake tract fits without modification. Suitable for the 49 cc platform with 4.6 hp or 4.4 hp (model years 1999 to 2006).\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with a hex key set, open-end wrenches for counter-locking, and a flat-head screwdriver for adjusting the play.\u003c\/p\u003e\n\u003cp\u003eThrottle cable for TGB Delivery and Pegasus Sky, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Facts\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eDimensions and inner cable correspond to the original part\u003c\/li\u003e\n\n\u003cli\u003eSuitable for the 49 cc platform with 4.4 to 4.6 hp\u003c\/li\u003e\n\n\u003cli\u003eRouting between throttle grip and throttle valve without modification\u003c\/li\u003e\n\n\u003cli\u003eCovers Pegasus Sky 50 and Sky 50 I (model years 1999 to 2006)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (general operating permit) required. Does not fit TGB Delivery or Pegasus Sky from model year 2007 onwards. Compare length and nipples with the product image before ordering.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in common sizes\u003c\/li\u003e\n\n\u003cli\u003eOpen-end wrench for the lock nut\u003c\/li\u003e\n\n\u003cli\u003eFlat-head screwdriver for adjusting play\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × throttle cable (ready for installation). Not included: throttle grip, carburetor, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable fit newer TGB models from 2007 onwards?\u003c\/strong\u003e\u003cbr\u003eNot guaranteed. Compare length and nipples with the product image before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich variants of the Pegasus Sky are covered?\u003c\/strong\u003e\u003cbr\u003ePegasus Sky 50 and Sky 50 I from model years 1999 to 2006 with 49 cc and 4.4 or 4.6 hp.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original spare part design.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo throttle cable for TGB 303 Delivery and Pegasus Sky 50 (model years 1999 to 2006). Dimensions and inner cable correspond to the original part, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712784068942,"sku":"6235139","price":13.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Gaszug-fuer-TGB-Delivery-und-Pegasus-Expre.jpg?v=1788884885"},{"product_id":"moturo-6235158","title":"Moturo speedometer cable for Kymco Agility B\u0026W 50-125cc","description":"\u003ch2\u003eMoturo Speedometer Cable for Kymco Agility, B\u0026amp;W, DJ 50, Dink 125 (MY 98-13)\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo speedometer cable for your Kymco scooter (Agility, B\u0026amp;W, DJ 50, Dink 125, MY 98-13) — the wear part between the front wheel and the speedometer. Drive square at the speedo gear, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe speedometer cable transmits the rotation from the front wheel to the speedometer in the cockpit. The drive square at the lower end engages with the speedometer gear of the front wheel hub, while the driver at the top locks into the speedometer housing. Fits Agility 50 R10 and R12, B\u0026amp;W, DJ 50, and Dink 125 (model years 1998 to 2013).\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with a screwdriver.\u003c\/p\u003e\n\u003cp\u003eSpeedometer cable for your Kymco scooter, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Facts\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eDrive square at the lower end for the speedometer gear of the front wheel hub\u003c\/li\u003e\n\n\u003cli\u003eDriver at the upper end for the speedometer mount in the cockpit\u003c\/li\u003e\n\n\u003cli\u003eFits Agility 50 R10\/R12, B\u0026amp;W, DJ 50, and Dink 125 (1998 to 2013)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (general operating permit) required. Wear part, replacement does not require registration. Does not fit other Kymco scooters with different speedometer mounts such as the Super 8 or People — please compare cable length and driver shape with the product image before ordering.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eScrewdriver\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × Speedometer cable (ready to install). Not included: speedometer gear, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable fit the Kymco Super 8 or People?\u003c\/strong\u003e\u003cbr\u003eNo, different speedometer cable geometry and different mount in the cockpit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Wear part in original spare part design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I measure the correct length before ordering?\u003c\/strong\u003e\u003cbr\u003eCompare the driver and drive square with the product image.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo speedometer cable suitable for Kymco Agility, B\u0026amp;W, DJ 50, and Dink 125 (model years 1998 to 2013). Drive square at the speedo gear, ready to install.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712785740110,"sku":"6235158","price":6.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Tachowelle-Kymco-Agility--BundW-50-125ccm.jpg?v=1788884894"},{"product_id":"moturo-6235179","title":"Moturo choke cable for Yamaha PW50 PW 50 88-06","description":"\u003ch2\u003eMoturo Choke Cable for Yamaha PW50 and PW80 PeeWee 88-06\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo choke cable for your Yamaha PW50 and PW80 PeeWee (MY 88-06) — a wear part that should be replaced after extended operation. Push\u0026amp;pull design, cable length approx. 76 cm, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe choke cable opens and closes the choke valve on your PeeWee's carburetor. Cable length approx. 76 cm, mounting hole diameter approx. 8 mm.\u003c\/p\u003e\n\u003cp\u003eSuitable for the PW50 (model years 1988 to 2013) and the PW80 (model years 1985 to 2006). Cables show signs of wear after extended use and should be replaced. If a choke cable is stiff within the Bowden cable, cold starting will suffer and the choke will not disengage properly.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with an Allen key set and a wrench for the lock nut.\u003c\/p\u003e\n\u003cp\u003eChoke cable for the PeeWee, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003ePush\u0026amp;pull design, operates the choke valve on the carburetor\u003c\/li\u003e\n\n\u003cli\u003eCable length approx. 76 cm\u003c\/li\u003e\n\n\u003cli\u003eMounting hole diameter approx. 8 mm\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (general operating permit) required. Wear part, replacement does not need to be registered. Before installation, compare the cable length and mounting hole diameter with the old cable.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eAllen key set in common sizes\u003c\/li\u003e\n\n\u003cli\u003eWrench for the lock nut on the carburetor\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × choke cable push\u0026amp;pull (ready to install). Not included: tools, lubricants, screws.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable fit a PW50 from 2014 onwards?\u003c\/strong\u003e\u003cbr\u003eThe PW50 was produced in this form until 2013. For later models, compare the cable length and mounting hole diameter with the old cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the replacement need to be registered?\u003c\/strong\u003e\u003cbr\u003eNo. It is a wear part in the original spare part design, no separate ABE required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I know the old cable needs replacing?\u003c\/strong\u003e\u003cbr\u003eStiff choke operation, frayed strands, or a cable that does not spring back properly.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo choke cable for Yamaha PW50 (model years 1988 to 2013) and PW80 (model years 1985 to 2006). Push\u0026amp;pull design, cable length approx. 76 cm, mounting hole diameter approx. 8 mm, ready to install.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712788361550,"sku":"6235179","price":12.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Chokezug-fuer-Yamaha-PW50-PW-50-88-4.jpg?v=1788884905"},{"product_id":"moturo-6235195","title":"Moturo Grip Set Handle Grips for Yamaha PW 50 88-06","description":"\u003ch2\u003eMoturo Grip Set for Yamaha PW 50 88-06\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo grip set for your Yamaha PW 50 88-06 — a wear part on the handlebars that ages due to sun, rain, and the hands of mechanics. Throttle grip with throttle sleeve as a pair, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe grip set fits on the handlebars of the Yamaha PW 50 (model years 1988 to 2006) and provides grip on the bike. The right grip has a slightly larger inner diameter to fit over the throttle sleeve, while the left grip sits directly on the handlebar tube. The rubber grips can be used flexibly with or without the throttle sleeve — the matching sleeve is included with the pair.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour using compressed air or brake cleaner to loosen the old grips and a little dish soap to slide on the new ones.\u003c\/p\u003e\n\u003cp\u003eGrip set for the PW 50, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eRight throttle grip with a slightly larger inner diameter for the throttle sleeve\u003c\/li\u003e\n\n\u003cli\u003eLeft grip for direct fit on the handlebar tube\u003c\/li\u003e\n\n\u003cli\u003eThrottle sleeve included in the delivery for the pair\u003c\/li\u003e\n\n\u003cli\u003eCan be used flexibly with or without the throttle sleeve\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (general operating permit) required. As a wear part, replacement does not need to be registered. Compare dimensions and geometry with the product image before ordering.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCompressed air or brake cleaner to loosen the old grips\u003c\/li\u003e\n\n\u003cli\u003eDish soap or hairspray to slide on the new grips\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × handlebar grip left, 1 × handlebar grip right (throttle grip), and 1 × throttle sleeve. Not included: handlebar end weights, tools, brake lever, and clutch lever.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the right grip also fit without the throttle sleeve?\u003c\/strong\u003e\u003cbr\u003eYes, the right grip can be used flexibly, with or without the sleeve.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I get the old grips off the handlebars?\u003c\/strong\u003e\u003cbr\u003eCompressed air between the grip and handlebar or some brake cleaner will loosen the old grip. Be careful with brake cleaner on painted surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the grips also be used for the Yamaha PW 80?\u003c\/strong\u003e\u003cbr\u003eNo, the PW 80 has a different handlebar geometry. Compare the product image before ordering.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo grip set for Yamaha PW 50 (model years 1988 to 2006). Throttle grip with throttle sleeve as a pair, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712790557006,"sku":"6235195","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Griffe-links-und-rechts-Yamaha-PW-50-88-06.jpg?v=1788884912"},{"product_id":"moturo-6235349","title":"Moturo Handlebar Grip Set Type 10 - black - Motorcycle ATV Quad Dirt Bike","description":"\u003ch2\u003eMoturo Type 10 grip set black for 22mm handlebars\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo Type 10 grip set in black for handlebars with a 22mm diameter — the grip to put on your bike after wear or a fall. Left inner diameter 22mm, right 23mm for the throttle sleeve, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe grip set sits on the handlebar and gives you contact with the handlebar unit and the twist throttle. Left inner diameter 22mm, right 23mm for the throttle sleeve, classic design in black.\u003c\/p\u003e\n\u003cp\u003eUniversal fit for handlebars with a 22mm outer diameter — street motorcycle, enduro, dirt bike, scooter, ATV, or quad. The throttle sleeve is included and can be removed if your bike does not need it.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with a screwdriver, a little brake cleaner, and compressed air.\u003c\/p\u003e\n\u003cp\u003eGrip set for your bike, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLeft inner diameter 22mm, right inner diameter 23mm\u003c\/li\u003e\n\n\u003cli\u003eUniversal fit for handlebars with 22mm outer diameter\u003c\/li\u003e\n\n\u003cli\u003eClassic design in black\u003c\/li\u003e\n\n\u003cli\u003eRight grip with mount for the throttle sleeve\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eReplacement\/wear part that does not require approval; replacement does not need to be registered. Compare the handlebar diameter and throttle sleeve mount with your bike before ordering.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eScrewdriver\u003c\/li\u003e\n\n\u003cli\u003eA little brake cleaner for removal\u003c\/li\u003e\n\n\u003cli\u003eCompressed air or a drop of handlebar glue for installation\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × Grip set Type 10 black (left and right grip). Throttle sleeve, if visible in the product image, is included. Not included: tools, brake cleaner.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDo the grips fit every handlebar?\u003c\/strong\u003e\u003cbr\u003eThey fit handlebars with a 22mm outer diameter, which is the most common standard size for motorcycles, scooters, and ATVs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I absolutely need the throttle sleeve?\u003c\/strong\u003e\u003cbr\u003eNo, it can be removed so that the grip set can also be used without the throttle sleeve.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I get the old grips off?\u003c\/strong\u003e\u003cbr\u003eInsert a screwdriver under the grip, spray in a little brake cleaner, and carefully pull them off.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo Type 10 grip set in black for handlebars with 22mm outer diameter. Left inner diameter 22mm, right 23mm for the throttle sleeve, ready for installation — suitable for motorcycle, enduro, dirt bike, scooter, ATV, or quad.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712807301454,"sku":"6235349","price":7.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Griffsatz-Set-Griffe-Typ-10-schwarz---1.jpg?v=1788885019"},{"product_id":"moturo-6235350","title":"Moturo Grip Set Type 7 - black - Motorcycle ATV Quad Dirt Bike","description":"\u003ch2\u003eMoturo Type 7 grip set, black for 22mm handlebars\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo Type 7 grip pair for motorcycles, scooters, ATVs, quads, and dirt bikes with 22mm handlebar diameter — the component that goes on the bike with every handlebar change and after every fall. Left grip 22mm, right grip 23mm for the throttle sleeve, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe grips are located at the end of the handlebar and provide the connection between hand and handlebar, brake lever, and throttle. The left grip has an inner diameter of 22mm and goes directly onto the handlebar tube, while the right grip has 23mm and fits over the throttle sleeve. Supplied in a classic black design.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour using brake cleaner, compressed air, or a screwdriver for prying, and a little hairspray or grip glue for a secure fit.\u003c\/p\u003e\n\u003cp\u003eGrip set for your bike, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLeft grip: inner diameter 22mm for standard handlebars\u003c\/li\u003e\n\n\u003cli\u003eRight grip: inner diameter 23mm for the throttle sleeve\u003c\/li\u003e\n\n\u003cli\u003eUniversal for motorcycle, enduro, dirt bike, scooter, ATV, and quad with 22mm handlebars\u003c\/li\u003e\n\n\u003cli\u003eClassic design in black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (general operating permit) required. Universal item for 22mm handlebars; compare handlebar diameter and throttle sleeve with the photo on the product page before ordering. The set will not fit if handlebar dimensions differ or if the throttle sleeves are square.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBrake cleaner or compressed air to loosen the old grips\u003c\/li\u003e\n\n\u003cli\u003eScrewdriver or utility knife to remove old grips\u003c\/li\u003e\n\n\u003cli\u003eGrip glue or hairspray for a secure fit\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × Type 7 grip set, black (left grip + right grip). If a throttle sleeve is visible in the product image, it is included. Not included: grip glue, tools, handlebar end caps.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDo the grips fit on 7\/8-inch handlebars?\u003c\/strong\u003e\u003cbr\u003eYes. 7\/8 inch corresponds to 22.2mm and is within the seating area of the left grip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the right grip fit directly on the handlebar without a throttle sleeve?\u003c\/strong\u003e\u003cbr\u003eNo, the right grip has an inner diameter of 23mm and requires the throttle sleeve or a corresponding adapter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Wear part in original spare part design.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo Type 7 grip set, black for motorcycle, scooter, ATV, quad, and dirt bike with 22mm handlebars. Left grip 22mm, right grip 23mm for the throttle sleeve, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712807399758,"sku":"6235350","price":6.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Griffsatz-Set-Griffe-Typ-7-schwarz-Motorra.jpg?v=1788885021"},{"product_id":"moturo-6235351","title":"Moturo grip set type 3 - black - motorcycle ATV quad dirt bike","description":"\u003ch2\u003eMoturo Grip Set Type 3 Black for 22mm Handlebars\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo Grip Set Type 3 in black for 22mm handlebars on motorcycles, scooters, enduros, dirt bikes, ATVs, and quads — the wear part that belongs on the bike during every spring check-up. Left grip 22mm, right grip 23mm, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe grips sit on the handlebars and transfer input from your hand to the throttle and clutch. Left grip with 22mm inner diameter, right throttle grip with 23mm inner diameter to fit over the throttle sleeve. Universal fit for all common 22mm handlebars.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with a screwdriver and brake cleaner or compressed air.\u003c\/p\u003e\n\u003cp\u003eGrip set for your bike, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLeft grip: inner diameter 22mm\u003c\/li\u003e\n\n\u003cli\u003eRight throttle grip: inner diameter 23mm (for over the throttle sleeve)\u003c\/li\u003e\n\n\u003cli\u003eUniversal fit for 22mm handlebars\u003c\/li\u003e\n\n\u003cli\u003eClassic design in black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes – please read\u003c\/h3\u003e\n\u003cp\u003eRegistration-free replacement\/wear part; replacement does not require entry in vehicle documents. Check the handlebar diameter before ordering — the grips fit exclusively on 22mm handlebars.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eFlat-head screwdriver to lift the old grip\u003c\/li\u003e\n\n\u003cli\u003eBrake cleaner or compressed air for installation aid\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of Delivery\u003c\/h3\u003e\n\u003cp\u003e1 × Grip Set Type 3 Black (left grip + right throttle grip). If a throttle sleeve is visible in the product image, it is included in the delivery. Not included: handlebar end weights, safety wire, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDo the grips fit on a 7\/8-inch handlebar?\u003c\/strong\u003e\u003cbr\u003eYes, 7\/8 inch corresponds to 22.2mm and is within the tolerance range for 22mm handlebars.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need glue for installation?\u003c\/strong\u003e\u003cbr\u003eOptional. Sliding them on with brake cleaner and letting them dry is sufficient for most applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo the grips also fit without a throttle sleeve?\u003c\/strong\u003e\u003cbr\u003eYes, the 23mm right grip is absolutely flexible in its use — with or without a sleeve.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo Grip Set Type 3 in black for 22mm handlebars on motorcycles, scooters, enduros, dirt bikes, ATVs, and quads. Left grip 22mm inner diameter, right throttle grip 23mm inner diameter, ready to install.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712807498062,"sku":"6235351","price":7.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Griffsatz-Set-Griffe-Typ-3-schwarz-Motorra.jpg?v=1788885020"},{"product_id":"moturo-6235352","title":"Moturo Grip Set Type 2 - black - Motorcycle ATV Quad Dirt Bike","description":"\u003ch2\u003eMoturo Grip Set Universal for 22mm Handlebars — Motorcycle, ATV\/Quad, Dirt Bike, Scooter\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo grip set for 22mm handlebars on motorcycles, ATVs\/quads, dirt bikes, and scooters — a wear part that should be replaced after every season or fall. Inner diameter 22mm left, 23mm right for the throttle sleeve, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe grip set sits on the left and right sides of the handlebar and transfers control from your hand to the steering and throttle. Inner diameter 22mm left, 23mm right, so the right grip fits over the throttle sleeve. Classic design, color black.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour using brake cleaner and a thin screwdriver to loosen the old grips.\u003c\/p\u003e\n\u003cp\u003eUniversal fit for standard 22mm handlebars on road motorcycles, enduros, dirt bikes, scooters, ATVs, and quads. Depending on the product image, the throttle sleeve may be included or can be omitted if the existing sleeve is reused.\u003c\/p\u003e\n\u003cp\u003eGrip set for your handlebars, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eInner diameter 22mm left, 23mm right for the throttle sleeve\u003c\/li\u003e\n\n\u003cli\u003eUniversal fit for standard 22mm handlebars\u003c\/li\u003e\n\n\u003cli\u003eClassic design in black\u003c\/li\u003e\n\n\u003cli\u003eScope of delivery follows the product image\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes – please read\u003c\/h3\u003e\n\u003cp\u003eReplacement\/wear part that does not require type approval; replacement does not need to be registered. Handlebars with a different diameter (other than 22mm) are not compatible.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBrake cleaner or compressed air\u003c\/li\u003e\n\n\u003cli\u003eThin screwdriver to loosen old grips\u003c\/li\u003e\n\n\u003cli\u003eUtility knife if the old grips are glued\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × grip set (left and right grip). Throttle sleeve depending on product image. Not included: handlebars, tools, grip glue.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDo the grips fit on 7\/8 inch handlebars?\u003c\/strong\u003e\u003cbr\u003eYes, 7\/8 inch corresponds to approx. 22mm. Dimensions are compatible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need glue or safety wire?\u003c\/strong\u003e\u003cbr\u003eBrake cleaner to slide them on is usually sufficient. Optional grip glue for a permanent hold; safety wire recommended for off-road use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the right grip work without a throttle sleeve?\u003c\/strong\u003e\u003cbr\u003eOn bikes with a thicker throttle tube, yes. On thinner tubes, a sleeve or collar is required as a spacer.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo grip set for 22mm handlebars on motorcycle, ATV\/Quad, dirt bike, and scooter — wear part. Inner diameter 22mm left, 23mm right for the throttle sleeve, classic design in black, ready to install.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712807629134,"sku":"6235352","price":6.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Griffsatz-Set-Griffe-Typ-2-schwarz-Motor_1.jpg?v=1788885022"},{"product_id":"moturo-6235376","title":"Moturo Thumb Throttle Metal Black for 250cc ATV Quad Dirt Bike Pocket Bike","description":"\u003ch2\u003eMoturo Metal Thumb Throttle for 250cc ATV, Quad, Pocket Bike, and Dirt Bike\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo metal thumb throttle for your 250cc ATV, quad, pocket bike, or dirt bike — the locking point limits the throttle valve opening. For 22mm handlebar ends, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting sits on the right handlebar end and controls the carburetor cable by thumb pressure. The side screw limits the travel, so the throttle valve no longer opens fully — practical for beginners or as a speed limiter during break-in.\u003c\/p\u003e\n\u003cp\u003eThe clamp fits on 22mm handlebar ends, and the mount accepts a standard throttle cable. The throttle cable is not included — reuse your existing cable or purchase one separately.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with a hex key set and a screwdriver.\u003c\/p\u003e\n\u003cp\u003eThumb throttle for ATV, quad, and pocket bike, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eMetal fitting with locking screw to restrict full-throttle position\u003c\/li\u003e\n\n\u003cli\u003eFits on 22mm handlebar ends, standard size for ATVs and pocket bikes\u003c\/li\u003e\n\n\u003cli\u003eOperated by thumb pressure on the right handlebar\u003c\/li\u003e\n\n\u003cli\u003eUniversal item for 250cc ATV, quad, pocket bike, and dirt bike\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eComponent for racing and off-road use. No ABE\/StVZO approval. Not for use on public roads. Before ordering, compare the handlebar diameter and throttle cable mount with the product image.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in standard sizes\u003c\/li\u003e\n\n\u003cli\u003eScrewdriver\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × Metal thumb throttle assembly, ready for installation. Not included: throttle cable, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the thumb throttle fit every 250cc ATV?\u003c\/strong\u003e\u003cbr\u003eIt fits all models with a 22mm handlebar and a compatible throttle cable mount. Please compare with the product image before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the screw on the side for?\u003c\/strong\u003e\u003cbr\u003eIt limits the thumb lever travel and thus restricts the full-throttle position — useful for beginners or during break-in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a throttle cable included?\u003c\/strong\u003e\u003cbr\u003eNo. Reuse your existing cable or purchase one separately.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo metal thumb throttle for 250cc ATV, quad, pocket bike, and dirt bike. With locking screw to restrict full-throttle position. Fits 22mm handlebar ends, ready for installation. Throttle cable not included.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712810905934,"sku":"6235376","price":15.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Daumengas-metall-schwarz-fuer-250ccm-ATV_1.jpg?v=1788885038"},{"product_id":"moturo-6235377","title":"Moturo thumb throttle black for 50-125cc ATV Quad Dirt Bike Pocket Bike","description":"\u003ch2\u003eMoturo Thumb Throttle with Restrictor for ATV, Quad, Dirt Bike, and Pocket Bike\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo thumb throttle for 50 to 125cc ATV\/Quads, dirt bikes, and pocket bikes — control unit for the right side of the handlebar with a restrictor screw. Fits 22mm diameter handlebar ends, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe thumb throttle is mounted on the right side of the handlebar and operates the throttle via thumb pressure — typical for quads, pocket bikes, and small ATVs. The clamp fits on handlebar ends with a 22mm diameter, the standard size for small children's vehicles with 50 to 125cc engine displacement.\u003c\/p\u003e\n\u003cp\u003eAn adjustment screw on the housing manually limits the lever travel and thus restricts the maximum RPM. Practical for beginners or for limiting top speed.\u003c\/p\u003e\n\u003cp\u003eInstallation takes about half an hour with a hex key set and a Phillips screwdriver.\u003c\/p\u003e\n\u003cp\u003eThumb throttle for quads and pocket bikes, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eClamp for handlebar ends with 22mm diameter\u003c\/li\u003e\n\n\u003cli\u003eAdjustment screw for manual limitation of lever travel\u003c\/li\u003e\n\n\u003cli\u003eUniversal type for 50 to 125cc quads, pocket bikes, and dirt bikes\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes – please read\u003c\/h3\u003e\n\u003cp\u003eComponent for race and off-road use. No ABE\/StVZO approval. Not for public road traffic. Compare the handlebar mount and throttle cable routing with the photo on the product page before ordering.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in standard sizes\u003c\/li\u003e\n\n\u003cli\u003ePhillips screwdriver\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × thumb throttle with clamp and restrictor screw. Not included: throttle cable, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the thumb throttle fit every 22mm handlebar?\u003c\/strong\u003e\u003cbr\u003eIt fits on handlebars with a 22mm clamping mount on the right. Compare the dimensions and the recess for the clamping screw with the photo before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need StVZO approval?\u003c\/strong\u003e\u003cbr\u003eNo. Component exclusively for race and off-road, not for public road traffic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the restriction work?\u003c\/strong\u003e\u003cbr\u003eAn adjustment screw on the housing mechanically limits the lever travel. Manually adjustable with a hex key.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo thumb throttle with restrictor screw for 50 to 125cc ATV, quad, pocket bike, and dirt bike. Clamp for 22mm diameter handlebar ends, lever travel can be limited manually, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712810938702,"sku":"6235377","price":12.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Daumengas-metall-schwarz-4.jpg?v=1788885038"},{"product_id":"moturo-6235408","title":"Moturo clutch lever 135mm complete with handlebar fitting - for 22mm handlebars - ATV Quad","description":"\u003ch2\u003eMoturo 135mm Clutch Lever Set with Handlebar Clamp for 22mm Handlebars\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo clutch lever set for ATVs, quads, and dirt bikes with 22 mm handlebar clamps — the first part you'll want on your bike after a fall. 135 mm lever length, handle assembly and lever ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe clutch lever sits on the left side of the handlebar and transfers your pull to the release mechanism. The lever measures 135 millimeters, and the handle assembly fits a handlebar tube with a 22-millimeter diameter. This makes the set compatible with the standard handlebars found on ATVs, quads, and dirt bikes.\u003c\/p\u003e\n\u003cp\u003eYou can replace the complete set of lever and housing in about half an hour using a hex key set and a screwdriver. Slide on the clamp, connect the lever to the cable mount, align, tighten — done.\u003c\/p\u003e\n\u003cp\u003eClutch lever for ATVs and quads, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLever length 135 millimeters\u003c\/li\u003e\n\n\u003cli\u003eHandle assembly for 22-millimeter diameter handlebar tubes\u003c\/li\u003e\n\n\u003cli\u003eComplete set with lever and housing, ready for installation\u003c\/li\u003e\n\n\u003cli\u003eUniversal for ATV, quad, and dirt bike\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eRegistration-free replacement\/wear part; replacement does not require entry in vehicle documents. Only fits handlebars with a 22-millimeter diameter at the clamping point; the housing does not fit 25.4 or 28-millimeter handlebar tubes.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in standard sizes\u003c\/li\u003e\n\n\u003cli\u003eScrewdriver\u003c\/li\u003e\n\n\u003cli\u003eApproximately half an hour\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × 135-millimeter clutch lever, 1 × handle assembly for 22-millimeter handlebar tube. Not included: clutch cable, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the housing fit on a 7\/8 inch handlebar?\u003c\/strong\u003e\u003cbr\u003eYes, 22 millimeters corresponds to 7\/8 inch. This is the standard size for ATVs, quads, and dirt bikes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this part need to be registered?\u003c\/strong\u003e\u003cbr\u003eNo. This replacement\/wear part does not require registration; correct dimensions, design, and proper installation are what matter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the clutch cable included in the set?\u003c\/strong\u003e\u003cbr\u003eNo. Hook up your existing cable to the lever or purchase one separately.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo 135mm clutch lever set with handle assembly for 22mm handlebars. Universal for ATV, quad, and dirt bike. Lever length 135 millimeters, handle assembly for 22-millimeter diameter handlebar tube, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712813035854,"sku":"6235408","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Kupplungshebel-135mm-kpl-mit-Griffarmatur.jpg?v=1788885055"},{"product_id":"moturo-6235410","title":"Moturo clutch lever 184mm cpl. with lever assembly - for 22mm handlebars - ATV Quad","description":"\u003ch2\u003eMoturo Clutch Lever Set 184mm with perch for 22mm handlebars\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo clutch lever set for ATV, quad, and dirt bike with 22mm handlebar tube — after a fall or a bent lever, this is the most common component to be replaced on the bike. 184mm lever length, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe perch clamps onto the 22mm handlebar tube, the clutch lever sits in the standard mount with a lever length of 184mm. Universal item for ATV, quad, and dirt bike with common 22mm handlebar diameter.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with a hex key set and socket wrench for the clamping bolt.\u003c\/p\u003e\n\u003cp\u003eClutch lever set for your ATV, quad, or dirt bike, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLever length 184mm\u003c\/li\u003e\n\n\u003cli\u003ePerch for 22mm handlebar tube (standard size)\u003c\/li\u003e\n\n\u003cli\u003eComplete set consisting of perch and clutch lever\u003c\/li\u003e\n\n\u003cli\u003eUniversal fit for ATV, quad, and dirt bike\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eRegistration-free replacement\/wear part; replacement does not require entry in vehicle documents. Universal item — compare lever length, mount, and handlebar diameter with your existing component before ordering.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in common sizes\u003c\/li\u003e\n\n\u003cli\u003eSocket wrench for the perch clamping bolt\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × clutch lever (184mm), 1 × perch for 22mm handlebar tube. Not included: clutch cable, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the set fit every 22mm handlebar?\u003c\/strong\u003e\u003cbr\u003eYes, provided the handlebar diameter is 22mm. Compare with your handlebar before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the clutch cable included?\u003c\/strong\u003e\u003cbr\u003eNo. The cable must be ordered separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the component need to be registered?\u003c\/strong\u003e\u003cbr\u003eNo. This replacement\/wear part does not require registration; correct dimensions, design, and proper installation are what matter.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo clutch lever set 184mm with perch for 22mm handlebar tube. Universal item for ATV, quad, and dirt bike. Complete set consisting of lever and perch, ready to install. Registration-free replacement\/wear part; replacement does not require entry in vehicle documents. \u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712813134158,"sku":"6235410","price":12.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Kupplungshebel-184mm-kpl-mit-Griffarmatur.jpg?v=1788885056"},{"product_id":"moturo-6235418","title":"Moturo choke cable 1050mm for 150cc to 250cc ATV Quad","description":"\u003ch2\u003eMoturo Choke Cable 1090mm for 150cc to 250cc ATV\/Quad\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo choke cable for 150cc to 250cc ATVs\/Quads — a typical wear part that should be replaced after prolonged use to prevent the choke mechanism on the carburetor from jamming. 1090mm cable, 68mm sleeve, includes solder nipple, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe choke cable transfers the movement from the choke lever on the handlebar to the carburetor. The cable is approx. 1090mm long, the sleeve approx. 68mm — suitable for common 150cc to 250cc carburetor designs on ATVs and quads. A solder nipple is included, allowing you to shorten the cable end and solder it on after measuring it against your carburetor.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with wrenches, side cutters, and a soldering iron. Before installation, trim the cable length against the original cable and clip the sleeve into the existing holder.\u003c\/p\u003e\n\u003cp\u003eChoke cable for ATV and quad, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCable length approx. 1090mm, sleeve length approx. 68mm\u003c\/li\u003e\n\n\u003cli\u003eIncludes solder nipple for adjustment to the carburetor model\u003c\/li\u003e\n\n\u003cli\u003eSuitable for 150cc to 250cc ATVs and quads\u003c\/li\u003e\n\n\u003cli\u003eUniversal item — check dimensions against the original cable before ordering\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (general operating permit) required. Universal item — compare cable length, sleeve length, and nipple fitting against the original cable of your ATV\/quad before ordering.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eWrenches for the carburetor clamping screw\u003c\/li\u003e\n\n\u003cli\u003eSide cutters for cutting to length\u003c\/li\u003e\n\n\u003cli\u003eSoldering iron for the nipple\u003c\/li\u003e\n\n\u003cli\u003eApprox. half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × Choke cable with sleeve and solder nipple. Not included: solder, tools.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this cable fit every 150cc to 250cc carburetor on ATVs and quads?\u003c\/strong\u003e\u003cbr\u003eUniversal item; compare cable length, sleeve length, and nipple fitting against the original cable of your ATV\/quad before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original spare part design, no separate ABE required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I attach the nipple to the end of the cable?\u003c\/strong\u003e\u003cbr\u003eCut the cable to the desired length, slide on the solder nipple, and solder it in place. Standard Bowden cable technology.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo choke cable for 150cc to 250cc ATVs and quads. Cable approx. 1090mm, sleeve approx. 68mm, includes solder nipple for adjustment to the carburetor model. Original spare part design, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712813986126,"sku":"6235418","price":10.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Chokezug-Seilzug-1050mm-fuer-150ccm-bis-3.jpg?v=1788885060"},{"product_id":"moturo-6235419","title":"Moturo choke cable 700mm for 50cc to 110cc ATV Quad","description":"\u003ch2\u003eMoturo choke cable for 50cc to 110cc ATVs and quads\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo choke cable for ATVs and quads with 50cc to 110cc displacement (universal item) — a wear part that often needs replacing after extended use. 700mm cable length, 65mm housing length, includes solder nipple and is ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe choke cable transfers the movement of the choke lever on the handlebar to the carburetor, ensuring a clean start when the engine is cold. With a cable length of 700mm and a housing length of 65mm, the cable fits common 50cc to 110cc ATVs and quads. A solder nipple for custom adjustment is included.\u003c\/p\u003e\n\u003cp\u003eWorn choke cables are characterized by stiff operation or an exposed housing. Please compare the cable length and housing length with your old cable before ordering, as the mounting geometry and lever travel vary depending on the model.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with a screwdriver set and wire cutters.\u003c\/p\u003e\n\u003cp\u003eChoke cable for your ATV\/quad, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e700mm cable length with 65mm housing length\u003c\/li\u003e\n\n\u003cli\u003eSolder nipple for custom adjustment to carburetor and lever\u003c\/li\u003e\n\n\u003cli\u003eUniversal for 50cc to 110cc ATVs and quads\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal equipment replacement type, no separate ABE (general operating permit) required. Choke cables are wear parts; please compare the cable length and housing length with the old part before ordering, as the mounting geometry varies depending on the model.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eScrewdriver set\u003c\/li\u003e\n\n\u003cli\u003eWire cutters for shortening the cable\u003c\/li\u003e\n\n\u003cli\u003eSoldering iron for the solder nipple\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × choke cable with housing and solder nipple. Not included: tools, solder.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the choke cable also fit 125cc ATVs?\u003c\/strong\u003e\u003cbr\u003eOften yes for 125cc displacement, but please compare the cable length and housing length with the old cable before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original equipment replacement type, no separate ABE required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a solder nipple?\u003c\/strong\u003e\u003cbr\u003eThe solder nipple is mounted on the free end of the cable and fixed with solder so that the cable sits securely in the lever.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo choke cable for 50cc to 110cc displacement ATVs and quads (universal item). 700mm cable length, 65mm housing length, includes solder nipple and is ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712814084430,"sku":"6235419","price":10.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Chokezug-Seilzug-700mm-fuer-50ccm-bis-2.jpg?v=1788885060"},{"product_id":"moturo-6235420","title":"Moturo throttle cable 1010mm for 150cc to 250cc ATV Quad","description":"\u003ch2\u003eMoturo Throttle Cable for ATV and Quad 150 to 250 cc\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo throttle cable for your 150 to 250 cc ATV\/Quad — the most common wear part in the carburetor system after a long season or when the throttle grip becomes stiff. 1010 mm cable length with solder nipple, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe throttle cable transmits the movement of the throttle grip to the carburetor. 1010 mm cable length and 67 mm outer casing, plus a solder nipple included in the scope of delivery — the dimensions are taken from the product description of the stock item.\u003c\/p\u003e\n\u003cp\u003eUniversal size for ATVs and quads with 150 to 250 cc. Before replacing, compare the cable length and casing length with the old cable, as end sleeves and nipple shapes vary depending on the manufacturer.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with a socket wrench set and pliers for the solder nipple.\u003c\/p\u003e\n\u003cp\u003eThrottle cable for your ATV\/Quad, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Numbers\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCable length 1010 mm, casing length 67 mm — dimensions from the product description of the stock item\u003c\/li\u003e\n\n\u003cli\u003eSolder nipple included\u003c\/li\u003e\n\n\u003cli\u003eUniversal size for ATVs and quads with 150 to 250 cc\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eRegistration-free spare\/wear part; replacement does not require entry in vehicle documents. \u003c\/p\u003e\n\u003cp\u003eBefore ordering, compare the cable length, casing length, and nipple shape with the old throttle cable of your ATV\/Quad — platforms differ from one another in terms of end sleeves depending on the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSocket wrench set or open-ended wrench set in common sizes\u003c\/li\u003e\n\n\u003cli\u003ePliers for the solder nipple\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × Throttle cable with casing and solder nipple. Not included: tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the throttle cable fit every 150 to 250 cc ATV\/Quad?\u003c\/strong\u003e\u003cbr\u003eNo, universal size. Before ordering, compare the cable length, casing length, and nipple shape with the old cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the component need to be registered?\u003c\/strong\u003e\u003cbr\u003eNo. This spare\/wear part does not require registration; correct dimensions, design, and proper installation are important.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I connect the solder nipple to the cable?\u003c\/strong\u003e\u003cbr\u003eSlide the nipple over the cable end cut to size and solder it. Check the fit before initial installation.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo throttle cable for ATV and Quad with 150 to 250 cc. Cable length 1010 mm, casing length 67 mm, with solder nipple included. Universal size — compare dimensions and nipple shape with the old cable before ordering. Registration-free spare\/wear part; replacement does not require entry in vehicle documents. \u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712814117198,"sku":"6235420","price":10.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Gaszug-Seilzug-1010mm-fuer-150ccm-bis-1.jpg?v=1788885061"},{"product_id":"moturo-6235421","title":"Moturo Throttle Cable 1090mm for 200cc to 250cc ATV Quad","description":"\u003ch2\u003eMoturo Throttle Cable 1090mm for ATV Quad 200-250cc\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo throttle cable for your 200cc to 250cc ATV\/Quad — the wear part that almost always needs replacing after extended use. Cable 1090mm, housing 90mm, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe throttle cable transmits the rotational movement from the throttle grip to the carburetor slide. The cable length is approx. 1090mm, and the housing measures approx. 90mm. Supplied with a solder nipple for a clean final assembly at the slide.\u003c\/p\u003e\n\u003cp\u003eCan be replaced in about half an hour with a hex key set and a screwdriver.\u003c\/p\u003e\n\u003cp\u003eThrottle cable for your ATV\/Quad, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCable length approx. 1090mm\u003c\/li\u003e\n\n\u003cli\u003eHousing length approx. 90mm\u003c\/li\u003e\n\n\u003cli\u003eSolder nipple for final assembly at the carburetor slide included\u003c\/li\u003e\n\n\u003cli\u003eUniversal size for ATV\/Quad with 200cc to 250cc\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (general operating permit) required. Universal item: Check the cable length, housing length, and nipple fitting against your old cable before ordering.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in standard sizes\u003c\/li\u003e\n\n\u003cli\u003eScrewdriver\u003c\/li\u003e\n\n\u003cli\u003eSide cutters and soldering iron for the nipple\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × throttle cable with housing, 1 × solder nipple. Not included: Solder, tools, throttle grip.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable fit every 200-250cc quad?\u003c\/strong\u003e\u003cbr\u003eUniversal size. Compare the cable length of 1090mm and housing of 90mm with your old cable before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Wear part in original spare part design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the solder nipple included?\u003c\/strong\u003e\u003cbr\u003eYes, a solder nipple is included. You will need to provide your own solder and soldering iron.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo throttle cable for ATV\/Quad with 200cc to 250cc. Cable length approx. 1090mm, housing length approx. 90mm, with solder nipple, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712814215502,"sku":"6235421","price":8.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Gaszug-Seilzug-1090mm-fuer-200ccm-bis-1.jpg?v=1788885062"},{"product_id":"moturo-6235652","title":"Moturo throttle cable for Yamaha Bear Tracker 250 Big Bear 350","description":"\u003ch2\u003eMoturo throttle cable for Yamaha Big Bear, Bear Tracker, Kodiak and Wolverine\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo throttle cable for your Yamaha ATV Big Bear, Bear Tracker, Kodiak and Wolverine (MY 00-09) — a wear part for daily use. Inner cable and outer casing complete, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Bowden cable connects the twist grip\/throttle lever and the carburetor. It transfers your throttle movement precisely to the throttle valve and should be checked regularly as it is a wear part. Tested on the YFM 400 platforms Big Bear, Bear Tracker and Kodiak (model years 2000 to 2004) and the YFM 350 models Wolverine and Bruin (model years 2006 to 2009). Outer casing and inner cable are cleanly manufactured, with end ferrules for the throttle and carburetor side.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with combination pliers and the appropriate wrench for the lock nut. Compare lengths with the old cable beforehand.\u003c\/p\u003e\n\u003cp\u003eThrottle cable for your Yamaha ATV, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eInner cable and outer casing, cleanly manufactured\u003c\/li\u003e\n\n\u003cli\u003eEnd ferrules for throttle and carburetor side\u003c\/li\u003e\n\n\u003cli\u003eTested on YFM 400 (MY 2000 to 2004) and YFM 350 (MY 2006 to 2009)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal equipment replacement design, no separate ABE (general operating permit) required. Suitable for the YFM 400 and YFM 350 platforms mentioned in the application list. For deviating models, compare lengths with the old cable beforehand.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCombination pliers\u003c\/li\u003e\n\n\u003cli\u003eWrench for the lock nut\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × throttle cable complete (inner cable and outer casing with end ferrules). Not included: Tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the throttle cable also fit newer YFM models?\u003c\/strong\u003e\u003cbr\u003eNo, lengths differ. Applies to YFM 400 (model years 2000 to 2004) and YFM 350 (model years 2006 to 2009).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original equipment replacement design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I check before replacing?\u003c\/strong\u003e\u003cbr\u003eCompare the length of the inner cable and outer casing with the photo on the product page.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo throttle cable for Yamaha YFM 400 (Big Bear, Bear Tracker, Kodiak; model years 2000 to 2004) and YFM 350 (Wolverine, Bruin; model years 2006 to 2009). Inner cable and outer casing with end ferrules, ready to install.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712857108814,"sku":"6235652","price":21.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Gaszug-fuer-Yamaha-Bear-Tracker-250-Big-1.jpg?v=1788885172"},{"product_id":"moturo-6235653","title":"Moturo clutch cable suitable for Honda XL 200","description":"\u003ch2\u003eMoturo clutch cable for Honda XL 200, XR 200, CB 125 and ATC 200\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo clutch cable for Honda XL 200, XR 200, CB 125 and ATC 200 (MY 72-82) — a wear part to be replaced in case of breakage or a dragging clutch. Original dimensions, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable transmits the pressure from the clutch lever to the clutch mechanism. The housing, inner wire, and end pieces correspond to the dimensions of the original cable. The end sleeves fit the factory mounting points of the listed models. OEM quality according to the manufacturer's description, precisely manufactured and neatly finished.\u003c\/p\u003e\n\u003cp\u003eTypical reasons for replacement: snapped inner wire, dragging clutch, or stiff operation after years of use. Can be replaced in about half an hour with an open-ended wrench and some cable lubricant; remember to check the lever free play afterwards.\u003c\/p\u003e\n\u003cp\u003eClutch cable for Honda XL 200, manufactured by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eDimensions according to the original cable of the listed Honda models\u003c\/li\u003e\n\n\u003cli\u003eHousing, inner wire, and end pieces pre-assembled and ready to install\u003c\/li\u003e\n\n\u003cli\u003eSuitable for Honda XL 200, XR 200, CB 125, ATC 200 as well as XL 125 and XL 185\u003c\/li\u003e\n\n\u003cli\u003eOEM quality according to the manufacturer's description\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal replacement part design, no separate ABE (general operating permit) required. Honda used several cable variants between 1972 and 1982. Before ordering, compare the housing length and the shape of the end pieces with your original cable and the photo on the product page.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eOpen-ended wrench for the lock nut on the clutch lever\u003c\/li\u003e\n\n\u003cli\u003eCable lubricant or spray grease for initial lubrication\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × clutch cable (ready to install). Not included: tools, cable lubricant, small mounting hardware.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable fit the XL 200 R from model year 1984 onwards?\u003c\/strong\u003e\u003cbr\u003eLater models sometimes have different housing lengths. Compare with the original cable before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original replacement part design with the dimensions of the original cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable need to be lubricated before installation?\u003c\/strong\u003e\u003cbr\u003eRecommended. Apply some cable lubricant into the housing so that the cable operates smoothly from the start.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo clutch cable suitable for Honda XL 200, XR 200, CB 125, ATC 200 as well as XL 125 and XL 185 (model years 1972 to 1982). Dimensions according to original cable, OEM quality according to manufacturer's description, ready to install.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712857207118,"sku":"6235653","price":12.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Kupplungszug-fuer-Honda-XL-200-1.jpg?v=1788885172"},{"product_id":"moturo-6235654","title":"Moturo Clutch Cable for Yamaha YFZ 350 Banshee","description":"\u003ch2\u003eMoturo Clutch Cable for Yamaha YFZ 350 Banshee 00-06\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo clutch cable for your Yamaha YFZ 350 Banshee 00-06 — a wear part that becomes stiff or snaps after a few seasons. Features a polyethylene inner sleeve and precise operating clearance, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis cable transfers the hand force from the clutch lever on the handlebars to the clutch on the engine block of the Banshee, model years 2000 to 2006. High-performance Bowden cable with high inner cable stability and operating accuracy; precise clearance set at the factory. A polyethylene inner sleeve ensures smooth and accurate operation throughout its service life and reduces friction losses at the lever.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about an hour using standard on-board tools, an open-end wrench for the lock nut, and a little Bowden cable grease. Before installation, adjust the lever clearance according to the Banshee workshop manual; check the old casing and replace it if there is any wear damage.\u003c\/p\u003e\n\u003cp\u003eClutch cable for the Banshee, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHigh-performance Bowden cable with high inner cable stability and operating accuracy\u003c\/li\u003e\n\n\u003cli\u003ePolyethylene inner sleeve for smooth and accurate operation\u003c\/li\u003e\n\n\u003cli\u003ePrecise operating clearance set at the factory\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal replacement part design, no separate ABE (general operating permit) required. Before initial use, check and readjust the lever clearance according to the Banshee workshop manual. Does not fit the YFZ 450 or other Yamaha platforms with different cable lengths.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eOn-board tools\u003c\/li\u003e\n\n\u003cli\u003eOpen-end wrench for the lock nut\u003c\/li\u003e\n\n\u003cli\u003eSome Bowden cable grease\u003c\/li\u003e\n\n\u003cli\u003eAbout one hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × Clutch cable for Yamaha YFZ 350 Banshee. Not included: Bowden cable grease, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable fit all Banshee variants between 2000 and 2006?\u003c\/strong\u003e\u003cbr\u003eYes. The cable fits the YFZ 350, YFZ 350 P, R, S, T, and V from model years 2000 to 2006.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to readjust the lever clearance?\u003c\/strong\u003e\u003cbr\u003eYes. After installation, check and readjust the clearance according to the Banshee workshop manual.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original replacement part design, no separate ABE required.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo clutch cable for Yamaha YFZ 350 Banshee (model years 2000 to 2006). High-performance Bowden cable with high inner cable stability, polyethylene inner sleeve, factory-set precise operating clearance, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712857403726,"sku":"6235654","price":17.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Kupplungszug-fuer-Yamaha-YFZ-350-Banshee-1.jpg?v=1788885175"},{"product_id":"moturo-6235655","title":"Moturo clutch cable suitable for Honda CB 250 CMX 250 CX 500","description":"\u003ch2\u003eMoturo Clutch Cable for Honda CB 250 N and CB 400 N 80-82\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo clutch cable for your Honda CB 250 N and CB 400 N (MY 80-82) — a typical wear part that snaps after years of use or seizes up due to corrosion. OE dimensions, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe clutch cable connects the clutch lever on the handlebar to the release mechanism on the engine. The dimensions correspond to the original cable for the CB 250 N and CB 400 N, meaning it can be replaced without adjusting mounts or routing points.\u003c\/p\u003e\n\u003cp\u003eThe inner wire and outer casing are neatly crimped, and the end nipples fit precisely into the lever and release mechanism mounts. You can adjust the lever play after installation using the adjustment screw.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with a set of open-ended wrenches and needle-nose pliers.\u003c\/p\u003e\n\u003cp\u003eClutch cable for CB 250 N and CB 400 N, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eDimensions correspond to the original cable of the CB 250 N and CB 400 N\u003c\/li\u003e\n\n\u003cli\u003eInner wire and casing neatly crimped\u003c\/li\u003e\n\n\u003cli\u003eEnd nipples fit exactly on the lever and release mechanism\u003c\/li\u003e\n\n\u003cli\u003ePlay-free adjustment via the adjustment screw on the clutch lever\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (general operating permit) required. As a wear part, replacement does not require registration.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eOpen-ended wrench set\u003c\/li\u003e\n\n\u003cli\u003eNeedle-nose pliers\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × clutch cable. Not included: tools, lubricant.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable fit the CB 250 RS or other model series?\u003c\/strong\u003e\u003cbr\u003eNo. Verified for the CB 250 N and CB 400 N models (model years 1980 to 1982).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to oil the cable before installation?\u003c\/strong\u003e\u003cbr\u003eYes, lightly oil the inner wire for smooth operation at the lever.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I adjust the lever play?\u003c\/strong\u003e\u003cbr\u003eAfter installation, adjust to the lever play specified in the workshop manual using the adjustment screw on the clutch lever.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo clutch cable for Honda CB 250 N and CB 400 N (model years 1980 to 1982). Dimensions correspond to the original cable, ready to install.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712857534798,"sku":"6235655","price":17.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Kupplungszug-fuer-Honda-CB-250-CMX-250-CX.jpg?v=1788885174"},{"product_id":"moturo-6235656","title":"Moturo throttle cable for Yamaha YZ 85 02-08","description":"\u003ch2\u003eMoturo throttle cable for Yamaha YZ 85 02-08\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo throttle cable for your Yamaha YZ 85 02-08 (LW and SW) — a wear part that belongs on the maintenance list every season. Original dimensions, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe throttle cable transmits the command from the throttle grip directly to the carburetor slide. The lengths and ferrules follow the original cable of the YZ 85, model years 2002 to 2008. Fits both the LW and SW variants equally.\u003c\/p\u003e\n\u003cp\u003eOn the carburetor side, the cable is hooked in, and the play at the throttle grip is adjusted using the adjuster screw. Tightening torques and play specifications follow the YZ 85 workshop manual.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with a hex key set and an open-ended wrench for the lock nut.\u003c\/p\u003e\n\u003cp\u003eThrottle cable for the YZ 85, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Facts\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLengths and ferrules based on the original YZ 85 cable\u003c\/li\u003e\n\n\u003cli\u003eFits YZ 85 LW and SW, model years 2002 to 2008\u003c\/li\u003e\n\n\u003cli\u003eTightening torques and play according to the YZ 85 workshop manual\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (general operating permit) required. Wear part, replacement does not require registration. Compare cable lengths on your bike before ordering.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in standard sizes\u003c\/li\u003e\n\n\u003cli\u003eOpen-ended wrench for the lock nut\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × throttle cable (ready for installation). Not included: lubricant, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable fit newer YZ 85 models from 2019 onwards?\u003c\/strong\u003e\u003cbr\u003eNo, different carburetor position and cable length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Wear part in original spare part design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I know when the throttle cable is due for replacement?\u003c\/strong\u003e\u003cbr\u003eSticky throttle grip, visible wire breaks, or frayed ferrules on the old cable.\u003c\/p\u003e\n\u003cspan\u003eMoturo throttle cable for Yamaha YZ 85 (model years 2002 to 2008, LW and SW). Lengths and ferrules based on the original YZ 85 cable, ready for installation. Replacement takes about half an hour with a hex key set and an open-ended wrench.\u003c\/span\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo throttle cable for Yamaha YZ 85 LW and SW (model years 2002 to 2008). Lengths and ferrules based on the original YZ 85 cable, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712857698638,"sku":"6235656","price":12.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Gaszug-Gasbowdenzug-fuer-Yamaha-YZ-85-02-0.jpg?v=1788885176"},{"product_id":"moturo-6235657","title":"Moturo throttle cable suitable for Honda ATC 185 ATC 200 TRX 200","description":"\u003ch2\u003eMoturo Throttle Cable for Honda ATC 185, ATC 200 and TRX 200 84-88\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo throttle cable for the Honda ATC 185, ATC 200 and TRX 200 (MY 84-88) — the connection between the throttle grip and the carburetor, a classic wear part with factory geometry, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe throttle cable transmits movement from the throttle grip to the carburetor slide. The outer sleeve protects the inner wire, and the end fitting follows the factory geometry of the Honda ATC and TRX platform for model years 1984 to 1988.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with a socket wrench and screwdriver. Before installation, lightly grease the inner wire and adjust the play at the throttle grip.\u003c\/p\u003e\n\u003cp\u003eThrottle cable for your ATV\/Quad, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eInner wire and protective sleeve for smooth transmission\u003c\/li\u003e\n\n\u003cli\u003eOE geometry of the Honda ATC and TRX platform (1984 to 1988)\u003c\/li\u003e\n\n\u003cli\u003eEnd fittings and clamps compatible with carburetor and throttle grip\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (general operating permit) required. Before installation, check and adjust the play at the throttle grip to ensure the idle speed returns freely.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSocket wrench for the clamping screw on the carburetor\u003c\/li\u003e\n\n\u003cli\u003eScrewdriver for the throttle grip\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of Delivery\u003c\/h3\u003e\n\u003cp\u003e1 × throttle cable (ready for installation). Not included: tools, lubricant.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this cable fit the Honda TRX 200 from 1990 onwards?\u003c\/strong\u003e\u003cbr\u003eNo, the geometry is different. This cable is for the ATC and TRX platform for model years 1984 to 1988.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original spare part design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I adjust the play correctly?\u003c\/strong\u003e\u003cbr\u003eThere should be a slight amount of free play at the throttle grip, and the idle speed must return freely. For values, please refer to the workshop manual of the ATC and TRX platform.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo throttle cable for the Honda ATC 185, ATC 200 and TRX 200 (model years 1984 to 1988). Inner wire and protective sleeve for smooth transmission, factory platform geometry, ready for installation in about half an hour.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712857731406,"sku":"6235657","price":14.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Gaszug-fuer-Honda-ATC-185-ATC-200-TRX-200.jpg?v=1788885175"},{"product_id":"moturo-6235658","title":"Moturo clutch cable complete, suitable for Honda TRX 300EX","description":"\u003ch2\u003eMoturo Clutch Cable for Honda TRX 300 EX 00-08\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo clutch cable for the Honda TRX 300 EX 00-08 (282 cc) — the component to get for your ATV if your original cable is snapped or stretched. Complete with outer casing, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe clutch cable transfers hand force from the lever to the clutch release on the engine. The dimensions correspond to the original cable, reference number 02-0108. Fits the TRX 300 EX (model years 2000 to 2008) and TRX 300 FW (model years 1993 to 2000), 282 cc.\u003c\/p\u003e\n\u003cp\u003eBefore installation, check the length and end pieces against the installed cable. A fresh cable saves hand force at the lever and restores a clear pressure point.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with an Allen key set, wrench, and a bit of clutch grease for the nipples.\u003c\/p\u003e\n\u003cp\u003eClutch cable for the TRX 300 EX ATV, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eReference number 02-0108\u003c\/li\u003e\n\n\u003cli\u003eDimensions correspond to the original cable\u003c\/li\u003e\n\n\u003cli\u003eFits TRX 300 EX (MY 2000 to 2008) and TRX 300 FW (MY 1993 to 2000), 282 cc\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (general operating permit) required. Compare length and end pieces against the installed cable before ordering.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eAllen key set in common sizes\u003c\/li\u003e\n\n\u003cli\u003eWrench for the mounting nuts\u003c\/li\u003e\n\n\u003cli\u003eClutch grease for the nipples\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × clutch cable complete with outer casing (ready for installation). Not included: clutch grease, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable also fit the TRX 300 FW?\u003c\/strong\u003e\u003cbr\u003eYes, approved for TRX 300 FW (model years 1993 to 2000) and TRX 300 EX (model years 2000 to 2008).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the reference number for the cable?\u003c\/strong\u003e\u003cbr\u003e02-0108. The dimensions correspond to the original cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat should I check before replacing it?\u003c\/strong\u003e\u003cbr\u003eCompare the length and end pieces against the installed cable and compare with the photo on the product page.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo clutch cable complete for Honda TRX 300 EX (model years 2000 to 2008) and TRX 300 FW (model years 1993 to 2000), 282 cc. Reference number 02-0108. Dimensions correspond to the original cable, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712857862478,"sku":"6235658","price":17.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Kupplungszug-Bowdenzug-kpl--fuer-Honda-TRX.jpg?v=1788885176"},{"product_id":"moturo-6235659","title":"Moturo clutch cable cpl. suitable for Honda XL 75 XL 80","description":"\u003ch2\u003eMoturo complete clutch cable for Honda XL 75, XL 80 and XR 100\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo complete clutch cable for your Honda XL 75, XL 80 and XR 100 (MY 77-85) — a wear part between the clutch lever and release arm that can snap or become stiff over the years. Outer casing and inner cable in original dimensions, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Bowden cable transmits the lever force from the handlebar to the release arm on the engine. The lengths correspond to the original cable, the inner cable runs smoothly within the casing, and the end pieces fit into the original mounts on the lever and engine block.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with an open-ended wrench and a screwdriver. Unhook the old cable from the lever and engine, install the new cable, and adjust the play at the adjuster wheel.\u003c\/p\u003e\n\u003cp\u003eClutch cable for your Honda XL and XR, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBowden cable design: casing plus inner cable, precisely manufactured\u003c\/li\u003e\n\n\u003cli\u003eLengths correspond to the original cable for the XL 75, XL 80 and XR 100\u003c\/li\u003e\n\n\u003cli\u003eEnd pieces fit into the original mounts on the clutch lever and engine block\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (general operating permit) required. Before ordering, compare the model and year of your Honda with the photo on the product page — the cable fits the Honda XL 75 (model years 1977 to 1979), XL 80 (model years 1980 to 1985) and XR 100 (model years 1981 to 1984). Not for the XR 100 R from 1985 onwards (different geometry).\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eOpen-ended wrench for the lock nut on the adjuster wheel\u003c\/li\u003e\n\n\u003cli\u003eScrewdriver for the lever block\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × complete clutch cable (Bowden cable with casing and inner cable, end pieces pre-assembled). Not included: tools, lubricating grease, lock nuts.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable fit the XR 100 R from 1985 onwards?\u003c\/strong\u003e\u003cbr\u003eNo, different lengths and different end piece geometry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration for the replacement?\u003c\/strong\u003e\u003cbr\u003eNo. Original spare part design, not a component requiring registration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I adjust the lever play?\u003c\/strong\u003e\u003cbr\u003eVia the adjuster wheel on the clutch lever, set to the target value specified in the respective Honda workshop manual.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo complete clutch cable for Honda XL 75, XL 80 and XR 100 (model years 1977 to 1985). Bowden cable with casing and inner cable, lengths correspond to the original cable, ready to install. Original spare part design, no separate ABE required.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712857928014,"sku":"6235659","price":12.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Kupplungszug-Bowdenzug-kpl--fuer-Honda-X_1.jpg?v=1788885177"},{"product_id":"moturo-6235660","title":"Moturo clutch cable cpl. suitable for Honda ATC 250R TRX 250","description":"\u003ch2\u003eMoturo complete clutch cable for Honda TRX 250 01-04\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo complete clutch cable for your Honda TRX 250 EX, TE, and TM (MY 01-04) — the wear part that eventually snaps after years on the trails. Housing and inner cable in original dimensions, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe clutch cable transmits your lever force from the handlebar to the clutch lever on the engine. If the original cable snaps after years on the trails, your quad is sidelined. The dimensions correspond to the original cable for the TRX 250 EX, TE, and TM (model years 2001 to 2004), and the fittings fit directly into the factory mounting points. The housing and inner cable are cleanly manufactured, and the cable operates precisely.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with a socket wrench and an open-ended wrench. Adjust the lever free play according to the workshop manual.\u003c\/p\u003e\n\u003cp\u003eClutch cable for the TRX 250, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eDimensions correspond to the original TRX 250 cable\u003c\/li\u003e\n\n\u003cli\u003eOE fitment for TRX 250 EX, TE, and TM (model years 2001 to 2004)\u003c\/li\u003e\n\n\u003cli\u003eCleanly processed housing and inner cable, precise cable action\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal replacement part design, no separate type approval (ABE) required. This is a wear part; replacement does not require registration. Before installation, compare the housing and cable length with the old cable.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSocket wrench for the mounting nut\u003c\/li\u003e\n\n\u003cli\u003eOpen-ended wrench for the lock nut\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × complete clutch cable (housing and inner cable, ready to install). Not included: tools, lubricants.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable also fit the older TRX 250R?\u003c\/strong\u003e\u003cbr\u003eNo, different lengths and mounting geometry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Wear part in original replacement part design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the length of the cable?\u003c\/strong\u003e\u003cbr\u003eCompare the housing and cable length with the photo on the product page before ordering.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo complete clutch cable for Honda TRX 250 EX, TE, and TM (model years 2001 to 2004). Dimensions correspond to the original TRX 250 cable, OE fitment, ready to install in about half an hour.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712858386766,"sku":"6235660","price":29.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Kupplungszug-Bowdenzug-kpl--fuer-Honda-A_1.jpg?v=1788885179"},{"product_id":"moturo-6235661","title":"Moturo clutch cable cpl. fits Honda TRX 400EX","description":"\u003ch2\u003eMoturo complete clutch cable for Honda TRX 400EX\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo complete clutch cable for your Honda TRX 400EX (model years 00-04) — a typical wear part that must be replaced immediately if it snaps. Dimensions follow the original cable, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Bowden cable transmits the lever travel from the clutch handle to the clutch at the engine. Inner and outer cable dimensions follow the original TRX 400EX cable, with end fittings that fit the factory specifications for the handlebar assembly and engine casing. Reference number 02-0382.\u003c\/p\u003e\n\u003cp\u003eIf the cable snaps on the trail, the quad becomes unrideable. Replacing it restores full clutch functionality and is a standard procedure at the handlebar and engine.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with a set of open-end wrenches and a screwdriver for adjustment at the clutch lever.\u003c\/p\u003e\n\u003cp\u003eClutch cable for the TRX 400EX, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eDimensions follow the original TRX 400EX cable\u003c\/li\u003e\n\n\u003cli\u003eEnd fittings fit the factory specifications for the handlebar assembly and engine casing\u003c\/li\u003e\n\n\u003cli\u003eTransmits lever travel from the clutch handle to the clutch at the engine\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design; no separate ABE (general operating permit) required. No registration of the replacement is necessary.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSet of standard open-end wrenches\u003c\/li\u003e\n\n\u003cli\u003eScrewdriver for adjustment at the lever\u003c\/li\u003e\n\n\u003cli\u003eApproximately half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × complete clutch cable with end fittings on both sides (ready for installation). Not included: tools, lubricants.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this cable fit the TRX 400EX from model year 2005 onwards?\u003c\/strong\u003e\u003cbr\u003eNo, it is a different model generation with different geometry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original spare part design with original geometry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I adjust the cable play?\u003c\/strong\u003e\u003cbr\u003eUsing the adjusting screw on the clutch lever as per the TRX 400EX workshop manual.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo complete clutch cable for Honda TRX 400EX (model years 2000 to 2004). Dimensions follow the original cable, end fittings match the factory specifications for the handlebar assembly and engine casing, reference number 02-0382, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712859009358,"sku":"6235661","price":15.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Kupplungszug-Bowdenzug-kpl--fuer-Honda-TRX_9e895e4d-0d19-432d-b54b-991be75c631c.jpg?v=1788885179"},{"product_id":"moturo-6235662","title":"Moturo clutch cable cpl. for Yamaha YFM 350X","description":"\u003ch2\u003eMoturo complete clutch cable for Yamaha YFM 350 Warrior 87-04\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo complete clutch cable for your Yamaha YFM 350 Warrior (year 87-04) — snapped original cables are the most common replacement on a quad. OEM dimensions, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Bowden cable transmits the hand clutch actuation from the handlebar to the release lever on the engine casing. The inner wire and outer housing follow the original dimensions, and the end ferrules fit precisely into the mounts on the handlebar lever and engine, as per factory specifications. This ensures that the pulling force at the lever is as reproducible as it was from the factory.\u003c\/p\u003e\n\u003cp\u003eReplace in about half an hour with a socket wrench for the lock nuts and a drop of chain spray for the inner wire. Subsequently, readjust the play at the lever so that the pressure point remains clear.\u003c\/p\u003e\n\u003cp\u003eClutch cable for the Yamaha YFM 350 Warrior, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eInner wire and housing to original dimensions, end ferrules match factory hole patterns precisely\u003c\/li\u003e\n\n\u003cli\u003e348 cc platform: Yamaha YFM 350 Warrior, model years 1987 to 2004\u003c\/li\u003e\n\n\u003cli\u003eReplacement for snapped original cables, factory-spec dimensions\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal replacement part design, no separate ABE (general operating permit) required. Before replacing, check the lever bearing and the mount on the engine for wear — a worn lever will also damage the new cable.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSocket wrench for the lock nuts\u003c\/li\u003e\n\n\u003cli\u003eChain spray or cable lubricant for the inner wire\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × complete clutch cable (ready to install). Not included: tools, lubricants.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this cable fit the Raptor 350 (YFM 350R)?\u003c\/strong\u003e\u003cbr\u003eCompare the length and the shape of the end ferrules with the photo on the product page. Different handlebar shapes change the cable routing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original replacement part design, no separate ABE required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I correctly adjust the lever play?\u003c\/strong\u003e\u003cbr\u003eAdjust the play using the adjusting screw on the handlebar lever until the pressure point is clearly defined. Tighten the lock nut, done.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo complete clutch cable for Yamaha YFM 350 Warrior (model years 1987 to 2004). Inner wire and housing to original dimensions, end ferrules match factory hole patterns precisely, ready to install.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712859369806,"sku":"6235662","price":29.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Kupplungszug-Bowdenzug-kpl--fuer-Yamaha-_1.jpg?v=1788885179"},{"product_id":"moturo-6235663","title":"Moturo clutch cable cpl. for Yamaha IT 200 250 400","description":"\u003ch2\u003eMoturo complete clutch cable for Yamaha IT, DT and YZ 75-98\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo complete clutch cable for your Yamaha IT 200\/250\/400, DT 250 and YZ 125 (MY 75-98) — the part that regularly ends up on the bike after a snapped original cable. Original dimensions, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe clutch cable transfers the lever travel from the handlebar grip to the clutch in the engine housing. The dimensions correspond to the original cable, manufactured in OEM quality according to factory specifications. Replacement for snapped or worn\/stretched original cables on your IT, DT or YZ.\u003c\/p\u003e\n\u003cp\u003eThe outer casing, inner cable and end pieces are cleanly processed, with lengths corresponding to the original cables. Adjustment is made at the lever and at the adjuster wheel on the clutch side according to the workshop manual for the respective IT, DT or YZ.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with a socket wrench set, open-ended wrench and screwdriver.\u003c\/p\u003e\n\u003cp\u003eClutch cable for IT, DT and YZ, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Facts\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eOuter casing, inner cable and end pieces according to factory specifications\u003c\/li\u003e\n\n\u003cli\u003eOE geometry at the lever and clutch-side mount\u003c\/li\u003e\n\n\u003cli\u003eOriginal replacement part design in OEM quality\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal replacement part design, no separate ABE (general operating permit) required. Wear part, replacement does not require registration. Please compare lengths and end pieces with the photo on the product page before ordering, as the IT, DT and YZ series had several cable variants over the model years 1975 to 1998.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSocket wrench set in common sizes\u003c\/li\u003e\n\n\u003cli\u003eOpen-ended wrench set\u003c\/li\u003e\n\n\u003cli\u003eScrewdriver\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × complete clutch cable (outer casing, inner cable, end pieces). Not included: tools, lubricants.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable fit a YZ 125 from MY 1999 onwards?\u003c\/strong\u003e\u003cbr\u003eNo, different cable lengths and mounting geometry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Wear part in original replacement part design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I check if the dimensions are correct before ordering?\u003c\/strong\u003e\u003cbr\u003eCompare the outer casing length and end pieces with the photo on the product page and, if necessary, with your original cable.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo complete clutch cable for Yamaha IT 200\/250\/400, DT 250 and YZ 125 (model years 1975 to 1998). Outer casing, inner cable and end pieces according to OE geometry and factory specifications, original replacement part design, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712859566414,"sku":"6235663","price":13.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Kupplungszug-Bowdenzug-kpl--fuer-Yamaha-_1_ca2b33a0-370b-43d7-93cc-537c3a5c50cd.jpg?v=1788885180"},{"product_id":"moturo-6235664","title":"Moturo speedometer cable tachometer cable suitable for Honda XL 175 CB 350 360 400","description":"\u003ch2\u003eMoturo Speedometer Cable for Honda XL, CB, FT, GL, CL\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo speedometer cable for your Honda XL 175, CB 350\/360\/400, FT 500, GL 500, CB 900 and CL 350 (MY 72-83) — the most common wear item on classic Honda four-cylinder motorcycles. OEM quality, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe speedometer cable transmits the rotational speed from the front wheel to the speedometer instrument. The dimensions correspond to the original cable, cleanly manufactured from high-quality materials according to the product description.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with a wrench and pliers. Disconnect the old cable at the speedometer and the wheel hub, thread the new cable, tighten the end pieces by hand, and you're done.\u003c\/p\u003e\n\u003cp\u003eSpeedometer cable for classic Hondas, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Facts\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eOEM quality, precisely manufactured\u003c\/li\u003e\n\n\u003cli\u003eDimensions identical to the original cable\u003c\/li\u003e\n\n\u003cli\u003eFits Honda XL 175, CB 350\/360\/400, FT 500, GL 500, CB 900, CL 350\u003c\/li\u003e\n\n\u003cli\u003eVehicles from 1972 to 1983, among others\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (general operating permit) required. Before ordering, compare the length and end pieces with the product image, as slight variations exist within the Honda model series.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eWrench for the union nuts\u003c\/li\u003e\n\n\u003cli\u003ePliers for gently loosening stuck end pieces\u003c\/li\u003e\n\n\u003cli\u003eA little lubricating grease for the cable\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × Speedometer cable (ready to install). Not included: lubricating grease, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable fit all mentioned Honda models?\u003c\/strong\u003e\u003cbr\u003eYes, the dimensions correspond to the original cable of the listed model series. Compare the length and end pieces with the product image before replacing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original spare part design, replacement does not require registration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I prevent the new cable from snapping again?\u003c\/strong\u003e\u003cbr\u003eLightly grease the cable before installation and ensure it is routed without kinks; the cable will last significantly longer.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo speedometer cable suitable for Honda XL 175, CB 350, CB 360, CB 400, FT 500, GL 500, CB 900 and CL 350 (1972 to 1983). OEM quality, dimensions identical to the original cable, ready to install.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712859828558,"sku":"6235664","price":12.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Tachowelle-Tachozug-fuer-Honda-XL-175-CB_1.jpg?v=1788885182"},{"product_id":"moturo-6235665","title":"Moturo choke cable suitable for Honda CB 400 450 CL 450","description":"\u003ch2\u003eMoturo Choke Cable for Honda CB 400, CB 450, CL 450 and other classics\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo choke cable for your Honda CB 400, CB 450, CL 450 and other classics (MY 72-84) — the quick replacement for a snapped original cable. Original dimensions and connections, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe choke cable operates the choke on the carburetor. The dimensions match the original cable, manufactured in OEM quality as a replacement for snapped or stretched cables.\u003c\/p\u003e\n\u003cp\u003eSuitable for Honda CB 400, CB 450, CL 450, CM 400, CM 450 and VF 500 (model years 1972 to 1984). The housing, inner cable and end pieces follow the geometry of the original cable and come pre-assembled and ready to install.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with a screwdriver and an open-ended wrench for the clamping screw on the choke lever.\u003c\/p\u003e\n\u003cp\u003eChoke cable for your classic Honda, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Facts\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHousing, inner cable, and end pieces to original specifications\u003c\/li\u003e\n\n\u003cli\u003eOEM quality, precisely manufactured\u003c\/li\u003e\n\n\u003cli\u003eSuitable for CB 400, CB 450, CL 450, CM 400, CM 450, VF 500 (model years 1972 to 1984)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal replacement part design, no separate ABE (general operating permit) required. Before ordering, check the model and year of manufacture against the vehicle list on the product page, as cable lengths vary between model series.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eScrewdriver\u003c\/li\u003e\n\n\u003cli\u003eOpen-ended wrench for the clamping screw on the choke lever\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × choke cable (assembled and ready to install). Not included: tools, clamping screws, carburetor gaskets.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the choke cable also fit the VF 500 F (PC 12)?\u003c\/strong\u003e\u003cbr\u003eYes, provided your model is listed in the vehicle list on the product page.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV inspection\/registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original replacement part design, no registration-required component.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat should I do if the choke sticks after installation?\u003c\/strong\u003e\u003cbr\u003eCheck the cable housing routing on the handlebar for kinks and readjust the play at the clamping screw.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo choke cable for Honda CB 400, CB 450, CL 450, CM 400, CM 450 and VF 500 (model years 1972 to 1984). Housing, inner cable, and end pieces to original specifications, manufactured in OEM quality, pre-assembled and ready to install.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712859959630,"sku":"6235665","price":19.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Chokezug-Bowdenzug-fuer-Honda-CB-400-450_1.jpg?v=1788885181"},{"product_id":"moturo-6235666","title":"Moturo speedometer cable tachometer cable suitable for Honda CB 350 CL 350 CX 650E","description":"\u003ch2\u003eMoturo speedometer cable for Honda CB 350 \/ CL 350 \/ CX 650\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo speedometer cable for Honda CB 350, CL 350 Scrambler, and CX 650 (model years 72-83) — after years on the bike, it is often the component that is torn or worn out. Dimensions based on the original cable, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe speedometer cable transmits the rotational movement from the front wheel to the speedometer. The dimensions correspond to the original cable of the Honda CB 350, CL 350 Scrambler, and CX 650 (model years 1972 to 1983), and the connection geometry follows the workshop manual.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with a set of open-end wrenches and a screwdriver.\u003c\/p\u003e\n\u003cp\u003eSpeedometer cable for the Honda CB, CL, and CX, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eDimensions correspond to the original cable of the CB 350, CL 350, and CX 650\u003c\/li\u003e\n\n\u003cli\u003eConnection geometry according to the workshop manual for the respective models\u003c\/li\u003e\n\n\u003cli\u003eReplacement for torn or worn-out original cables\u003c\/li\u003e\n\n\u003cli\u003eFits CB 350 F, CB 350 K, CX 650 C, CX 650 E, and CX 650 T\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (general operating permit) required. Before ordering, compare the length and connection type with the product image and the removed cable — the CB, CL, and CX series share the same speedometer cable, though deviations in special variants are possible.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eOpen-end wrench set in common sizes\u003c\/li\u003e\n\n\u003cli\u003eScrewdriver\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × speedometer cable (ready for installation). Not included: tools, small fastening parts on the speedometer housing.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable also fit the CB 350 Four?\u003c\/strong\u003e\u003cbr\u003eYes, for the CB 350 F from model year 1972 onwards. Compare length and connection type with the removed cable before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. This is a wear part of original spare part design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat should I do if the cable tears again after a short time?\u003c\/strong\u003e\u003cbr\u003eCheck for an overly tight routing radius and ensure the speedometer drive on the front wheel moves freely.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo speedometer cable for Honda CB 350, CL 350 Scrambler, and CX 650 (model years 1972 to 1983). Dimensions based on the original cable, connection geometry according to the workshop manual, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712860189006,"sku":"6235666","price":16.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Tachowelle-Tachozug-fuer-Honda-CB-350-CL_1.jpg?v=1788885184"},{"product_id":"moturo-6235667","title":"Moturo speedometer cable tachometer cable for Suzuki GS 450 GS 500 GS 1100","description":"\u003ch2\u003eMoturo speedometer cable for Suzuki GS 450 \/ GS 500 \/ GS 750 \/ GS 1100\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo speedometer cable for your Suzuki GS 450, GS 500, GS 750, and GS 1100 (MY 77-86) — the wear part between the front wheel and speedometer that breaks after years of use. Original dimensions, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe speedometer cable transmits the rotational movement from the front wheel to the speedometer. The dimensions correspond to the original cable of the GS family from the model years 1977 to 1986, with cleanly finished end sleeves for a secure fit on the speedometer unit and drive sleeve.\u003c\/p\u003e\n\u003cp\u003eIf the factory cable is broken or stiff, replacing it is the most cost-effective solution before the speedometer stops working or the shaft binds in the housing.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with an open-ended wrench and some grease for the shaft.\u003c\/p\u003e\n\u003cp\u003eSpeedometer cable for the Suzuki GS, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eDimensions match the original Suzuki GS cable\u003c\/li\u003e\n\n\u003cli\u003eEnd sleeves for the speedometer unit and drive sleeve on the front wheel\u003c\/li\u003e\n\n\u003cli\u003eMechanical speed transmission via rotating shaft within the housing\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal replacement part design, no separate ABE required. The Suzuki GS series is very diverse — please compare the length and end fittings with your factory cable before ordering.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eOpen-ended wrench for the union nuts on the speedometer and drive sleeve\u003c\/li\u003e\n\n\u003cli\u003eCable grease for the shaft\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × speedometer cable complete with end sleeves (ready for installation). Not included: tools, cable grease.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this speedometer cable also fit the GS 500 E from MY 89 (GM51A)?\u003c\/strong\u003e\u003cbr\u003eNo, it is a different platform with a different housing length and end fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original replacement part design in factory style.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does a speedometer cable last?\u003c\/strong\u003e\u003cbr\u003eMaintained with cable grease, usually many years. Replace if it runs stiffly or if there is clicking in the speedometer before it snaps.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo speedometer cable for Suzuki GS 450, GS 500, GS 750, and GS 1100 (model years 1977 to 1986). Dimensions match the original cable, with end sleeves for the speedometer unit and drive sleeve on the front wheel. Original replacement part design, ready to install.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712860287310,"sku":"6235667","price":19.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Tachowelle-Tachozug-fuer-Suzuki-GS-450-G_1.jpg?v=1788885183"},{"product_id":"moturo-6235668","title":"Moturo choke cable suitable for Honda Goldwing I GL 1200 Aspencade","description":"\u003ch2\u003eMoturo Choke Cable for Honda Goldwing I GL 1200 Aspencade\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo choke cable for your Honda Goldwing I GL 1200 Aspencade 84-87 (GL 1200 D) — snapped original cables are the most common wear issue on the carburetor block. Dimensions correspond to the original cable, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe choke cable connects the choke lever on the handlebar to the carburetor block. Dimensions follow the original Goldwing I GL 1200 cable (model years 1984 to 1987, Aspencade 1984 to 1986); routing and end pieces adopt the factory geometry.\u003c\/p\u003e\n\u003cp\u003eReplacement in about half an hour with a set of open-end wrenches and screwdrivers.\u003c\/p\u003e\n\u003cp\u003eChoke cable for the Goldwing GL 1200, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eDimensions correspond to the original GL 1200 cable\u003c\/li\u003e\n\n\u003cli\u003eRouting and end pieces in factory geometry\u003c\/li\u003e\n\n\u003cli\u003eSuitable for GL 1200 D (model years 1984 to 1987, 94 hp, 1181 cc)\u003c\/li\u003e\n\n\u003cli\u003eCovers Aspencade variant model years 1984 to 1986\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes – Please Read\u003c\/h3\u003e\n\u003cp\u003eOriginal replacement part design, no separate ABE (general operating permit) required. Before ordering, compare the length and end pieces with the product image, as different carburetor variants may have been installed within the Goldwing series production period from 1984 to 1987.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSet of open-end wrenches in common sizes\u003c\/li\u003e\n\n\u003cli\u003eScrewdrivers (Phillips and flat-head)\u003c\/li\u003e\n\n\u003cli\u003eSome cable grease for the end pieces\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of Delivery\u003c\/h3\u003e\n\u003cp\u003e1 × choke cable (assembled and ready for installation). Not included: cable grease, tools, mounting hardware.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable also fit the Goldwing GL 1500 from '88 onwards?\u003c\/strong\u003e\u003cbr\u003eNo, different carburetor and handlebar geometry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original replacement part design; the replacement does not require registration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I find out if the cable fits my variant?\u003c\/strong\u003e\u003cbr\u003eCompare the length, housing, and end pieces with the product image and your old cable before ordering.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo choke cable for Honda Goldwing I GL 1200 Aspencade (model years 1984 to 1987, Aspencade 1984 to 1986, GL 1200 D, 1181 cc). Dimensions correspond to the original cable, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712860451150,"sku":"6235668","price":24.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Chokezug-fuer-Honda-Goldwing-I-GL-1200-Asp.jpg?v=1788885184"},{"product_id":"moturo-6235669","title":"Moturo throttle cable for Suzuki LT Quad Runner 250 LT 230E","description":"\u003ch2\u003eMoturo Throttle Cable for Suzuki LT Quad Runner 250 \/ LT 230E\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo throttle cable for your Suzuki LT Quad Runner 250 and LT 230E (87-93) — snapped original cables are the most common reason for replacement on the quad. Lengths and end pieces match the original cable, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe throttle cable transmits the position of your twist grip to the carburetor. Lengths and end pieces follow the original cable of the Suzuki LT Quad Runner 250 (model years 1987 to 1989) and the LT 230E (model years 1987 to 1993). Routing follows the original path.\u003c\/p\u003e\n\u003cp\u003eSnapped original cables are the most common reason for replacement on this quad. The Moturo throttle cable replaces the worn-out original cable without any adjustments needed to the stop or the twist grip.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about an hour with a hex key set, open-end wrenches in common sizes, and grease for the cable ends.\u003c\/p\u003e\n\u003cp\u003eThrottle cable for your Suzuki quad, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLengths and end pieces based on the original cable for the Suzuki LT 230E and LT Quad Runner 250\u003c\/li\u003e\n\n\u003cli\u003eRouting follows the original path, end pieces based on the original cable design\u003c\/li\u003e\n\n\u003cli\u003eFits LT 4WD Quad Runner 250 (model years 1987 to 1989) and LT 230E (model years 1987 to 1993)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes – Please Read\u003c\/h3\u003e\n\u003cp\u003eReplacement\/wear part not requiring registration; replacement does not need to be recorded in vehicle documents. Compare the outer length and the position of the end pieces with the photo on the product page before ordering.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in common sizes\u003c\/li\u003e\n\n\u003cli\u003eOpen-end wrenches in common sizes\u003c\/li\u003e\n\n\u003cli\u003eGrease for the cable ends\u003c\/li\u003e\n\n\u003cli\u003eAbout one hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of Delivery\u003c\/h3\u003e\n\u003cp\u003e1 × Throttle cable (ready to install). Not included: grease, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the throttle cable fit the LT 4WD variant?\u003c\/strong\u003e\u003cbr\u003eYes, the LT 4WD Quad Runner 250 and LT 230E use the same original routing path.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the component need to be registered?\u003c\/strong\u003e\u003cbr\u003eNo. This replacement\/wear part does not require registration; what is important are the correct dimensions, design, and proper installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I measure if the original cable still fits?\u003c\/strong\u003e\u003cbr\u003eCompare the outer length and the position of the end pieces with the photo on the product page before ordering.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo throttle cable for Suzuki LT Quad Runner 250 (model years 1987 to 1989) and LT 230E (model years 1987 to 1993). Lengths and end pieces based on the original cable, routing follows the original path, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712860483918,"sku":"6235669","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Gaszug-Seilzug-fuer-Suzuki-LT-Quad-Runne_1.jpg?v=1788885185"},{"product_id":"moturo-6235670","title":"Moturo Choke Cable for Suzuki GSXR 600 GSXR 750","description":"\u003ch2\u003eMoturo Choke Cable for Suzuki GSXR 600 and GSXR 750\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo choke cable for your Suzuki GSXR 600 (MY 97-00) and GSXR 750 (MY 96-97) — a precise replacement for a broken original cable. Original dimensions, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe choke cable transfers the movement of the choke lever from the handlebar to the carburetor, ensuring a clean start in cold conditions. The dimensions correspond to the original cable for the GSXR 600 from 1997 to 2000 and the GSXR 750 from 1996 to 1997, manufactured to original equipment quality as a replacement for snapped or detached original cables. Please compare lengths and end ferrules with the old cable before ordering to ensure a correct fit at the handlebar assembly and carburetor.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour using a screwdriver and standard-size open-end wrenches.\u003c\/p\u003e\n\u003cp\u003eChoke cable for the GSXR, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eDimensions correspond to the original cable\u003c\/li\u003e\n\n\u003cli\u003eOriginal equipment quality, cleanly manufactured\u003c\/li\u003e\n\n\u003cli\u003eConnects the choke lever on the handlebar to the carburetor\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (German operating permit) required. Applicable to GSXR 600 model years 1997 to 2000 and GSXR 750 model years 1996 to 1997. Other model years have different cable lengths.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eScrewdriver\u003c\/li\u003e\n\n\u003cli\u003eStandard-size open-end wrenches\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × Choke cable. Not included: tools, lubricant.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable fit the GSXR 600 from model year 2001 (K1) onwards?\u003c\/strong\u003e\u003cbr\u003eNo, the cable length is different.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original spare part design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I change the choke cable?\u003c\/strong\u003e\u003cbr\u003eUnhook the cable at the carburetor, loosen the ferrule at the handlebar lever, insert the new cable, and adjust the play.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo choke cable for Suzuki GSXR 600 (model years 1997 to 2000) and GSXR 750 (model years 1996 to 1997). Original dimensions, original equipment quality, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712860680526,"sku":"6235670","price":19.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Chokezug-Seilzug-fuer-Suzuki-GSXR-600-GS_1.jpg?v=1788885186"},{"product_id":"moturo-6235671","title":"Moturo throttle cable A (opening) suitable for Honda CB 400 CM 400 CB 450","description":"\u003ch2\u003eMoturo Throttle Cable A Opening for Honda CB 400 \/ CM 400 \/ CB 450 78-83\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo Throttle Cable A Opening for your Honda CB 400 \/ CM 400 \/ CB 450 (MY 78-83) — the cable that opens the throttle valve every time you twist the throttle grip. Original dimensions, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCable A transfers the movement from the throttle grip to the carburetor side and opens the throttle valve when turned. Dimensions, housing, and end pieces correspond to the original cable; routing and torque values follow the factory manual for the CB 400, CM 400, and CB 450 (model years 1978 to 1983). The cable is cleanly manufactured, and the inner wire runs freely within the housing.\u003c\/p\u003e\n\u003cp\u003eReplace in about half an hour: unhook the old cable at the throttle grip and the carburetor slide, route the new cable along the same path, and adjust the play at the throttle grip.\u003c\/p\u003e\n\u003cp\u003eThrottle cable for your Honda CB 400, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eDimensions and end pieces identical to the original cable of the CB 400, CM 400, and CB 450\u003c\/li\u003e\n\n\u003cli\u003eInner wire runs freely in the housing, cleanly finished end pieces\u003c\/li\u003e\n\n\u003cli\u003eRouting and torque values according to the Honda factory manual\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal replacement part design, no separate ABE (general operating permit) required. Compare length, housing dimensions, and end pieces with the removed original cable before ordering.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eOpen-end wrench set for counter-tightening at the carburetor\u003c\/li\u003e\n\n\u003cli\u003eFlat-head screwdriver for the adjustment screw\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × Throttle cable A \"Opening\" (ready to install). Not included: tools, lubricants, other cables.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDo I additionally need cable B \"Closing\"?\u003c\/strong\u003e\u003cbr\u003eThese Honda models use a dual-cable system with cable A (opening) and cable B (closing). Check your bike to see if both are installed and ideally replace them together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this cable fit the CB 450 SC (PC14, from 1986 onwards)?\u003c\/strong\u003e\u003cbr\u003eNo. The cable is designed for the CB 400 A, CB 400 N, CM 400 T, and the corresponding CB 450 from model years 1978 to 1983. For later models, please compare dimensions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original replacement part design, no registration required.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo Throttle Cable A Opening for Honda CB 400, CM 400, and CB 450 (model years 1978 to 1983). Dimensions, housing, and end pieces identical to original cable, ready to install.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712860844366,"sku":"6235671","price":14.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Gaszug-Seilzug-A-oeffnen-fuer-Honda-CB-4_1.jpg?v=1788885188"},{"product_id":"moturo-6235672","title":"Moturo throttle cable B closing, suitable for Honda CB 400 CM 400 CB 450","description":"\u003ch2\u003eMoturo Throttle Cable B (Closing) for Honda CB 400, CM 400 and CB 450 72-82\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo Throttle Cable B (closing) for Honda CB 400, CM 400, and CB 450 (MY 72-82) — replacement part for snapped or detached original cables. Dimensions correspond to the original cable, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable pulls the throttle slide back in the carburetor and ensures proper closing. The outer casing and inner wire are firmly crimped at both ends; end pieces and lengths are based on the original cable.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with a set of open-end wrenches and a little patience at the carburetor.\u003c\/p\u003e\n\u003cp\u003eThrottle cable for your Honda CB\/CM, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eThrottle cable B in closing direction, pulls the throttle slide back\u003c\/li\u003e\n\n\u003cli\u003eEnd pieces and lengths correspond to the original cable\u003c\/li\u003e\n\n\u003cli\u003eOuter casing and inner wire firmly crimped on both sides\u003c\/li\u003e\n\n\u003cli\u003eFits Honda CB 400 N\/A, CM 400 T and CB 450 K\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal replacement part design, no separate ABE (general operating permit) required. Before installation, compare lengths and end pieces with the original cable, as CB and CM models may have different carburetor variants and thus different connections over the years of production.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSet of open-end wrenches in common sizes\u003c\/li\u003e\n\n\u003cli\u003eScrewdriver\u003c\/li\u003e\n\n\u003cli\u003eSome lubricant for the cable routing\u003c\/li\u003e\n\n\u003cli\u003eApproximately half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of Delivery\u003c\/h3\u003e\n\u003cp\u003e1 × Throttle Cable B (closing direction). Not included in delivery: tools, lubricant, tank draining.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs this the opening or closing cable?\u003c\/strong\u003e\u003cbr\u003eCable B is the closing cable that pulls the throttle slide back to idle. The opening cable (cable A) can be found as a separate item.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable also fit the CX 500?\u003c\/strong\u003e\u003cbr\u003eThe CX 500 has a different carburetor design; compare lengths and end pieces with the photo on the product page before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original replacement part design, no separate ABE required.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo Throttle Cable B (Closing) for Honda CB 400, CM 400 and CB 450 (1972 to 1982). Dimensions correspond to the original cable, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712860877134,"sku":"6235672","price":10.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Gaszug-Seilzug-B-Schliessen-fuer-Honda-1.jpg?v=1788885187"},{"product_id":"moturo-6235673","title":"Moturo clutch cable for Suzuki RM 125 RM 250","description":"\u003ch2\u003eMoturo Clutch Cable for Suzuki RM 125 and RM 250 01-03\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo clutch cable for your Suzuki RM 125 and RM 250 (model years 01-03) — the typical wear part that is the first to snap during the rigors of racing. Inner cable and outer housing in original dimensions, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable transmits hand force from the clutch lever to the release mechanism and disengages the power transmission when shifting. The inner cable and outer housing match the dimensions of the original cable for the RM 125 and RM 250 (model years 2001 to 2003), and the eyelets fit the lever and engine housing perfectly. The routing and length follow the factory layout, passing the steering head to the clutch cover.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with a set of open-ended wrenches and a little cable lubricant for the inner housing.\u003c\/p\u003e\n\u003cp\u003eClutch cable for the Suzuki RM, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Facts\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eInner cable and outer housing in original factory dimensions\u003c\/li\u003e\n\n\u003cli\u003eFactory-fit eyelets for the clutch lever and engine housing\u003c\/li\u003e\n\n\u003cli\u003eRouting and length follow the factory path to the clutch cover\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (general operating permit) required. Wear part — perform a visual check of the inner housing and lubrication at every service.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSet of open-ended wrenches for the lock nuts\u003c\/li\u003e\n\n\u003cli\u003eCable lubricant for the inner housing\u003c\/li\u003e\n\n\u003cli\u003eApproximately half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × clutch cable inner wire with outer housing (ready for assembly). Not included: cable lubricant, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhich RM models does this cable cover?\u003c\/strong\u003e\u003cbr\u003eSuzuki RM 125 and RM 250, model years 2001 to 2003.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Replacement wear part designed as an original spare part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to adjust the cable after installation?\u003c\/strong\u003e\u003cbr\u003eYes. Adjust lever play using the adjustment screw on the clutch lever and the engine housing.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo clutch cable for Suzuki RM 125 and RM 250 (model years 2001 to 2003). Inner cable and outer housing in original factory dimensions, factory-fit eyelets for the clutch lever and engine housing, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712860942670,"sku":"6235673","price":14.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Kupplungszug-Seilzug-fuer-Suzuki-RM-125-RM.jpg?v=1788885188"},{"product_id":"moturo-6235675","title":"Moturo speedometer cable for Kawasaki KZ305 KZ400 KZ440 KZ550 KZ750 Z400","description":"\u003ch2\u003eMoturo speedometer cable for Kawasaki KZ305, KZ400, KZ440, KZ550, KZ750 and Z400\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo speedometer cable for Kawasaki KZ305, KZ400, KZ440, KZ550, KZ750 and Z400 (MY 74-84) — replacement for snapped or worn-out original cables. Dimensions identical to OE, connections for front wheel and speedometer housing, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cable transmits the rotational movement from the front wheel to the speedometer. The dimensions correspond to the original cable, and the connections fit the front wheel and speedometer housing. The inner core and outer casing are cleanly manufactured; installation and operating behavior are identical to the original.\u003c\/p\u003e\n\u003cp\u003eTypical reasons for replacement: snapped or worn-out cable, inaccurate or flickering speedometer needle, seized cable after long periods of inactivity. Replacement takes about half an hour with a screwdriver and open-end wrench. The front wheel does not need to be removed.\u003c\/p\u003e\n\u003cp\u003eSpeedometer cable for the Z series, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Facts\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eDimensions identical to original cable\u003c\/li\u003e\n\n\u003cli\u003eConnections fit the front wheel and speedometer housing\u003c\/li\u003e\n\n\u003cli\u003eInner core and outer casing cleanly manufactured\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (general operating permit) required. A functional component in the speedometer drive train; replacement does not require registration. Not suitable for newer Kawasakis from the mid-80s onwards, as connection geometry and length differ.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eScrewdriver\u003c\/li\u003e\n\n\u003cli\u003eOpen-end wrench for the union nut on the speedometer\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × speedometer cable (ready for installation). Not included in delivery: tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat should I do if the cable seems too long or too short?\u003c\/strong\u003e\u003cbr\u003eCompare the length and connection geometry with the product image before ordering. Original cables for early Z models vary slightly depending on the model and year of manufacture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original spare part design, functional component with no mandatory approval.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cable sufficient for an electronic speedometer?\u003c\/strong\u003e\u003cbr\u003eNo, the cable is designed for mechanical speedometers with cable drive.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo speedometer cable for Kawasaki KZ305, KZ400, KZ440, KZ550, KZ750 and Z400 (model years 1974 to 1984). Dimensions identical to original cable, connections for front wheel and speedometer housing, ready to install.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712861204814,"sku":"6235675","price":19.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Tachowelle-fuer-Kawasaki-KZ-305-KZ-400-K_1.jpg?v=1788885190"},{"product_id":"moturo-6235676","title":"Moturo Throttle Cable for Yamaha YFM 660 Raptor","description":"\u003ch2\u003eMoturo Throttle Cable for Yamaha YFM 660 Raptor 01-05\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo throttle cable for your Yamaha YFM 660 Raptor (MY 01-05, model codes RN to RT) — the primary wear part on the handlebars when your original cable snaps. OE lengths and end fittings, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe throttle cable transmits the rotational movement from the handlebar grip to the throttle valve on the carburetor. The outer sleeve, inner cable, and end fittings follow the dimensions of the original YFM 660 Raptor throttle cable (model years 2001 to 2005), and the fittings on the handlebar and carburetor cover fit without the need for adjustments.\u003c\/p\u003e\n\u003cp\u003eTightening torques and play at the twist grip follow the Raptor workshop manual. The cable is cleanly manufactured and a direct replacement for snapped original throttle cables.\u003c\/p\u003e\n\u003cp\u003eCan be replaced in about an hour with a set of open-end wrenches and pliers for the end nipple.\u003c\/p\u003e\n\u003cp\u003eThrottle cable for the YFM 660 Raptor, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eOuter sleeve, inner cable, and end fittings based on the dimensions of the original YFM 660 Raptor throttle cable\u003c\/li\u003e\n\n\u003cli\u003eFittings on the handlebar and carburetor cover match OE patterns\u003c\/li\u003e\n\n\u003cli\u003eTightening torques and play at the twist grip according to the Raptor workshop manual\u003c\/li\u003e\n\n\u003cli\u003eDirect replacement for snapped original throttle cables for the RN, RP, RR, RRER, RS, and RT (model years 2001 to 2005)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (general operating permit) required. When installing, check the play at the twist grip to ensure the idle speed drops correctly and does not increase unintentionally when the handlebars are turned.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSet of standard open-end wrenches\u003c\/li\u003e\n\n\u003cli\u003ePliers for the end nipple\u003c\/li\u003e\n\n\u003cli\u003eApproximately one hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of Delivery\u003c\/h3\u003e\n\u003cp\u003e1 × Throttle cable (ready to install). Not included: tools, lubricants, twist grip sleeve.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this cable fit the Raptor 700 (YFM 700 R)?\u003c\/strong\u003e\u003cbr\u003eNo, the 700 model has a different cable length and end fitting geometry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original spare part design, replacement does not require registration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I know if this is the right cable for my variant?\u003c\/strong\u003e\u003cbr\u003eBefore ordering, compare the length, end fittings, and number of strands with the photo on the product page.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo throttle cable for Yamaha YFM 660 Raptor (model years 2001 to 2005, model codes RN, RP, RR, RRER, RS, and RT). OE lengths and end fittings, handlebar and carburetor cover fittings match OE patterns, ready to install.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712861303118,"sku":"6235676","price":16.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Gaszug-fuer-Yamaha-YFM-660-Raptor-1.jpg?v=1788885191"},{"product_id":"moturo-6235677","title":"Moturo clutch cable for Yamaha YZ 250F YZ 450F","description":"\u003ch2\u003eMoturo Clutch Cable for Yamaha YZ 250F and YZ 450F 04-05\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo clutch cable for your Yamaha YZ 250F and YZ 450F 04-05 — a wear part in motocross use that can snap or become stiff after hard seasons. Dimensions match the factory cable, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe clutch cable transfers movement from the lever on the handlebars to the release mechanism on the engine. The outer casing and inner wire are assembled to original lengths, and the end nipples fit into the OE mounts on the lever and engine.\u003c\/p\u003e\n\u003cp\u003eWear is indicated by a stiff pull, fraying at the transition into the casing, or play at the lever that can no longer be adjusted out. This is the latest time to replace the cable before it snaps on the track.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with an open-ended wrench and a screwdriver for adjustment.\u003c\/p\u003e\n\u003cp\u003eClutch cable for the YZ 250F and YZ 450F, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eOuter casing and inner wire in original length compared to the factory cable\u003c\/li\u003e\n\n\u003cli\u003eEnd nipples fit the OE mounts on the lever and engine\u003c\/li\u003e\n\n\u003cli\u003eDesigned for YZ 250F (4T, 249cc) and YZ 450F (449cc)\u003c\/li\u003e\n\n\u003cli\u003eAdjustable play via the lock nuts on the lever and the engine\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (German operating permit) required. As a wear part, replacement does not require registration. Fits Yamaha YZ 250F (4T) and YZ 450F, model years 2004 to 2005. Models from 2006 onwards have a different casing length — compare with the photo on the product page before ordering.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eOpen-ended wrench for the lock nuts\u003c\/li\u003e\n\n\u003cli\u003eScrewdriver for adjustment\u003c\/li\u003e\n\n\u003cli\u003eSome cable lubricant for the inner wire\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × clutch cable (assembled and ready for installation). Not included: tools, cable lubricant.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable also fit the YZ 250F or YZ 450F from 2006 onwards?\u003c\/strong\u003e\u003cbr\u003eNo, from 2006 onwards, the casing length and end nipple mounts are different.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need tools to replace it?\u003c\/strong\u003e\u003cbr\u003eAn open-ended wrench for the lock nuts and a screwdriver for adjustment are sufficient.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I know the cable needs replacing?\u003c\/strong\u003e\u003cbr\u003eThe lever pulls heavily, the inner wire frays at the transition into the casing, or there is play at the lever that can no longer be adjusted out.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo clutch cable for Yamaha YZ 250F (4T) and YZ 450F (model years 2004 to 2005). Outer casing and inner wire in original length compared to the factory cable, end nipples fit OE mounts on lever and engine, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712861466958,"sku":"6235677","price":16.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Kupplungszug-Seilzug-fuer-Yamaha-YZ-250F_1.jpg?v=1788885191"},{"product_id":"moturo-6235678","title":"Moturo choke cable suitable for Honda CB 550K CB 750 CB 900C","description":"\u003ch2\u003eMoturo Choke Cable for Honda CB 550K, CB 750 and CB 900C\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo choke cable for your Honda CB 550K, CB 750 and CB 900C (MY 75-82) — a snapped original cable is the most common reason for a choke replacement. Original dimensions, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe choke cable operates the choke lever on the carburetor from the handlebars and ensures a clean cold start when the engine is cold. The dimensions correspond to the original cable of the CB models (model years 1975 to 1982), and the routing follows the factory path along the tank. If the old cable snaps, the choke will remain stuck open or closed — idle speed and cold-running behavior go down the drain.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with a screwdriver and open-ended wrench for the lock nuts on the switch and carburetor.\u003c\/p\u003e\n\u003cp\u003eChoke cable for the Honda CB, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Figures\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eDimensions correspond to the original cable of the Honda CB models (model years 1975 to 1982)\u003c\/li\u003e\n\n\u003cli\u003eClean workmanship in OEM design\u003c\/li\u003e\n\n\u003cli\u003eReplaces snapped or stretched original cables\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOEM design, no separate ABE (general operating permit) required. Before ordering, compare the length and end pieces with the old cable — the CB series was revised several times over the years; choke switch and carburetor side vary depending on the model year.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eScrewdriver\u003c\/li\u003e\n\n\u003cli\u003eOpen-ended wrench for the lock nuts\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × Choke cable. Not included: tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable fit all versions of the CB 750?\u003c\/strong\u003e\u003cbr\u003eCompare the length and end pieces with the photo in the article. The CB 750 was revised several times over the years; deviating dimensions are possible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need it registered with the TÜV?\u003c\/strong\u003e\u003cbr\u003eNo. OEM design, no separate ABE required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I route the new cable correctly?\u003c\/strong\u003e\u003cbr\u003eFollow the factory routing along the tank, attach the end pieces to the switch and the carburetor, and adjust the play using the lock nut.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo choke cable for Honda CB 550 K, CB 750 (K\/F\/C) and CB 900 C (model years 1975 to 1982). Dimensions correspond to the original cable, ready to install. Replacement in about half an hour with a screwdriver and open-ended wrench.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712861532494,"sku":"6235678","price":12.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Chokezug-fuer-Honda-CB-550K-CB-750-CB-90_1.jpg?v=1788885192"},{"product_id":"moturo-6235679","title":"Moturo speedometer cable for Kawasaki EN 450 KZ 650 KZ 900 KZ 1000","description":"\u003ch2\u003eMoturo speedometer cable for Kawasaki EN 450, KZ 650, KZ 900 and KZ 1000\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo speedometer cable for your Kawasaki EN 450, KZ 650, KZ 900 and KZ 1000 (MY 81-83) — transmits the rotational speed from the front wheel to the speedometer. OEM quality, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe speedometer cable transmits the rotational movement from the drive on the front wheel to the speedometer instrument in the cockpit. The dimensions correspond to the original cable, and the workmanship follows OEM quality. Cleanly manufactured end sleeves, precise operation, no snagging.\u003c\/p\u003e\n\u003cp\u003eSuitable as a replacement for torn or worn-out original cables on Kawasaki EN 450, KZ 650, KZ 900 and KZ 1000 models from the 1981 to 1983 production period.\u003c\/p\u003e\n\u003cp\u003eExchange in about half an hour with a screwdriver and a socket wrench for the connection nuts at the speedometer and drive.\u003c\/p\u003e\n\u003cp\u003eSpeedometer cable for your Kawasaki, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Facts\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eDimensions identical to original cable\u003c\/li\u003e\n\n\u003cli\u003eOEM quality, cleanly manufactured end sleeves\u003c\/li\u003e\n\n\u003cli\u003ePrecise operation inside the sleeve, no snagging\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (general operating permit) required. Before ordering, compare the length and connection with the photo on the product page, as model variants may have different dimensions.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eScrewdriver\u003c\/li\u003e\n\n\u003cli\u003eSocket wrench for the connection nuts\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × speedometer cable (ready for assembly). Not included: tools, lubricant.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the speedometer cable fit newer Kawasaki models from 1984 onwards?\u003c\/strong\u003e\u003cbr\u003eCompare the length and connection with the photo on the product page. Other production years may have different dimensions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original spare part design, no separate ABE required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I grease the cable before installation?\u003c\/strong\u003e\u003cbr\u003eA thin layer of grease in the outer casing ensures smooth operation and a longer service life.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo speedometer cable for Kawasaki EN 450, KZ 650, KZ 900 and KZ 1000 (1981 to 1983 production years). OEM quality, dimensions correspond to the original cable, ready to install. Original spare part design, no separate ABE required.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712861663566,"sku":"6235679","price":16.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Tachowelle-fuer-Kawasaki-EN-450-KZ-650-K_1.jpg?v=1788885193"},{"product_id":"moturo-6235680","title":"Moturo throttle cable suitable for Honda Z 50 CT 70 CB100 CL 100 CB 125S CL 125","description":"\u003ch2\u003eMoturo Throttle Cable for Honda Z 50, CT 70, CB 100, CL 100, CB 125 S and CL 125\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo throttle cable for classic Honda models Z 50, CT 70, CB 100, CL 100, CB 125 S and CL 125 — a typical wear part that tears or stretches over the years. Cable length 90 cm, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe throttle cable transmits the rotation of the throttle grip to the carburetor. Cable length approx. 90 cm, outer casing approx. 83 cm, dimensions based on the original cable. Applicable production periods: Z 50 (MY 1974 to 1986) and CLR 125 (MY 1998).\u003c\/p\u003e\n\u003cp\u003eReplacement takes about an hour using a screwdriver and socket wrench.\u003c\/p\u003e\n\u003cp\u003eThrottle cable for classic Hondas, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCable length approx. 90 cm, outer casing approx. 83 cm\u003c\/li\u003e\n\n\u003cli\u003eDimensions based on original cable\u003c\/li\u003e\n\n\u003cli\u003eStop nipple and end sleeve match OE profile\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes – Please Read\u003c\/h3\u003e\n\u003cp\u003eOriginal replacement part design, no separate ABE (general operating permit) required. Before installation, compare the shape of the stop nipple and the size of the end sleeve with the old cable, as slight differences may occur depending on the model variant.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eScrewdriver\u003c\/li\u003e\n\n\u003cli\u003eSocket wrench for the clamp on the carburetor\u003c\/li\u003e\n\n\u003cli\u003eAbout one hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of Delivery\u003c\/h3\u003e\n\u003cp\u003e1 × throttle cable (cable length approx. 90 cm, outer casing approx. 83 cm). Not included: lubricant, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable fit all listed models?\u003c\/strong\u003e\u003cbr\u003eCompare the lengths and shape of the stop nipples with the old cable before ordering; slight differences between models are possible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original replacement part design, no separate ABE required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat should I use to lubricate the cable?\u003c\/strong\u003e\u003cbr\u003eApply cable grease or light machine oil into the casing, then pull it through several times.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo throttle cable for Honda Z 50, CT 70, CB 100, CL 100, CB 125 S and CL 125 (model years 1974 to 1998). Cable length approx. 90 cm, outer casing approx. 83 cm, dimensions based on original cable, ready to install.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712861761870,"sku":"6235680","price":12.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Gaszug-fuer-Honda-Z-50-CT-70-CB100-CL-10_1.jpg?v=1788885193"},{"product_id":"moturo-6235681","title":"Moturo choke cable suitable for Honda TRX 300 Four Trax 4x4 FW","description":"\u003ch2\u003eMoturo Choke Cable for Honda TRX 300 Four Trax 4x4 FW 88-95\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo choke cable for your Honda TRX 300 Four Trax 4x4 FW (model years 88-95) — the cable that often snaps after years of harsh use. OE dimensions, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe choke cable operates the starting aid on the carburetor and sits between the handlebars and the carburetor of your quad. The outer casing, inner wire, and end pieces correspond to the dimensions of the original cable for the TRX 300 FW (model years 1988 to 1995).\u003c\/p\u003e\n\u003cp\u003eOn a quad, this cable is the component most likely to fail after years of exposure to dirt and water. Routing follows the original path at the steering head to the carburetor.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with a hex key set and pliers for seating the nipple.\u003c\/p\u003e\n\u003cp\u003eChoke cable for the Honda TRX 300, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eOuter casing and inner wire in the dimensions of the original cable\u003c\/li\u003e\n\n\u003cli\u003eRouting follows the original path at the steering head to the carburetor\u003c\/li\u003e\n\n\u003cli\u003eSuitable for TRX 300 FW (Four Trax 4x4, 282cc) model years 1988 to 1995\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no registration required. Replacement does not require entry in vehicle documents. On the TRX 300 without FW (2x4), only fits if the carburetor connection and lengths match the photo on the product page.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in standard sizes\u003c\/li\u003e\n\n\u003cli\u003ePliers for the nipple seat on the carburetor\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × choke cable (ready to install). Not included: tools, mounting hardware.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable also fit the TRX 300 without four-wheel drive?\u003c\/strong\u003e\u003cbr\u003eThe cable only fits the 2x4 version if the carburetor connections and lengths are identical. Compare with the photo on the product page before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the component need to be registered?\u003c\/strong\u003e\u003cbr\u003eNo. This replacement\/wear part does not require registration; proper dimensions, design, and correct installation are important.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this cable for the choke or the throttle?\u003c\/strong\u003e\u003cbr\u003eFor the starting aid (choke) on the carburetor, not for the throttle cable.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo choke cable for Honda TRX 300 Four Trax 4x4 FW (model years 1988 to 1995, 282cc). Outer casing and inner wire in the dimensions of the original cable, ready to install.\u003c\/span\u003e\n\n\u003c\/div\u003e\n\u003cspan\u003eMoturo choke cable suitable for Honda TRX 300 Four Trax 4x4 FW (model years 1988 to 1995, 282cc). Outer casing and inner wire in the dimensions of the original cable. OE dimensions, ready to install. Original spare part design, no registration required.\u003c\/span\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712861925710,"sku":"6235681","price":16.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Chokezug-fuer-Honda-TRX-300-Four-Trax-4x_1.jpg?v=1788885194"},{"product_id":"moturo-6235682","title":"Moturo throttle cable for Yamaha XS 400 XS 750 XS 850 XS 1100","description":"\u003ch2\u003eMoturo Throttle Cable for Yamaha XS 400, XS 750, XS 850 and XS 1100 (77-82)\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo throttle cable for your Yamaha XS 400, XS 750, XS 850 and XS 1100 (MY 77-82) — the cable most likely to snap after decades and cause a stuck throttle. OE dimensions, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe throttle cable connects the twist grip to the carburetor and precisely transfers throttle input to the butterfly valves. Dimensions match the original cable; ferrules and nipples fit precisely into the twist grip and carburetor mount. A high-quality replacement for snapped or stretched original cables, without sticking or snagging at the twist grip.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with an open-ended wrench for the lock nut and a drop of chain grease for lubrication before installation. Adjust the free play at the twist grip according to the XS workshop manual.\u003c\/p\u003e\n\u003cp\u003eThrottle cable for the Yamaha XS, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eDimensions match the original Yamaha XS throttle cable\u003c\/li\u003e\n\n\u003cli\u003eFerrules and nipples fit precisely into the twist grip and carburetor mount\u003c\/li\u003e\n\n\u003cli\u003eReplacement for snapped or stretched original cables without sticking at the twist grip\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (German type approval) required. Fits Yamaha XS 400, XS 750, XS 850 and XS 1100, model years 1977 to 1982. Compare free play and routing against the original cable; check full throttle position and idle on the stationary engine before the first ride.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eOpen-ended wrench for the lock nut\u003c\/li\u003e\n\n\u003cli\u003eChain grease or cable oil for lubrication\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × Throttle cable. Not included: tools, grease.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable fit the XS 250 or XS 360?\u003c\/strong\u003e\u003cbr\u003eNo, the cable length and mount geometry differ.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to readjust the throttle play?\u003c\/strong\u003e\u003cbr\u003eYes. After replacement, adjust the free play at the twist grip to the target value according to the XS workshop manual.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I lubricate the new cable?\u003c\/strong\u003e\u003cbr\u003eA drop of chain grease or cable oil on the upper nipple is sufficient; pull it through a few times until the cable slides smoothly.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo throttle cable for Yamaha XS 400, XS 750, XS 850 and XS 1100 (model years 1977 to 1982). Dimensions match the original throttle cable, ferrules and nipples fit precisely into the twist grip and carburetor mount, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712862089550,"sku":"6235682","price":16.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Gaszug-Seilzug-fuer-Yamaha-XS-400-XS-750_1.jpg?v=1788885195"},{"product_id":"moturo-6235683","title":"Moturo speedometer cable compatible with Honda XL 250 XL 500 XB 900","description":"\u003ch2\u003eMoturo Speedometer Cable for Honda XL 250, XL 500, XB 900, CB 750 and CX 500\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo speedometer cable for your Honda XL 250, XL 500, XB 900, CB 750 Custom or CX 500 (model years 81-82) — the high-quality replacement for snapped original cables. Dimensions are a 1:1 match for the original cable, ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe speedometer cable transmits rotational speed from the front wheel drive to the speedometer in the cockpit. Inside, the inner spiral runs within the outer casing, and the end pieces lock firmly into the speedometer pinion and drive socket.\u003c\/p\u003e\n\u003cp\u003eThe dimensions are a 1:1 match for the original cable of the Honda XL 250, XL 500 (model years 1981 to 1982), CB 750 Custom, CX 500 and XB 900 — take the snapped cable out, put the new shaft in, and keep riding. OEM quality, precisely manufactured and cleanly finished, a high-quality replacement after a long period of inactivity.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with a set of wrenches and a screwdriver.\u003c\/p\u003e\n\u003cp\u003eSpeedometer cable for your vintage Honda, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Facts\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eDimensions are a 1:1 match for the original cable of the mentioned Honda models\u003c\/li\u003e\n\n\u003cli\u003eInner spiral in outer casing, end pieces in original geometry\u003c\/li\u003e\n\n\u003cli\u003eOEM quality, precisely manufactured and cleanly finished\u003c\/li\u003e\n\n\u003cli\u003eFits Honda XL 250, XL 500, XB 900, CB 750 Custom and CX 500\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal replacement part design, no separate ABE (general operating permit) required. Before ordering, compare the end piece shape and length with your currently installed cable.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eWrench set for the union nuts\u003c\/li\u003e\n\n\u003cli\u003eScrewdriver\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × Speedometer cable (ready for installation). Not included: Tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable also fit other model years of the XL and XB?\u003c\/strong\u003e\u003cbr\u003eCompare the end piece shape and length in the product image with your currently installed cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original replacement part design, no separate ABE required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I know if my old cable is faulty?\u003c\/strong\u003e\u003cbr\u003eA twitching speedometer needle, screeching at the drive, or no reading at all are typical symptoms.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo speedometer cable for Honda XL 250, XL 500, XB 900, CB 750 Custom and CX 500 (model years 1981 to 1982). Dimensions are a 1:1 match for the original cable, OEM quality, precisely manufactured and cleanly finished, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712862122318,"sku":"6235683","price":16.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Tachowelle-Speedometer-fuer-Honda-XL-250_1.jpg?v=1788885195"},{"product_id":"moturo-6235684","title":"Moturo choke cable for Suzuki LTF 4WDX LTF 230E LT 250 LT 300E","description":"\u003ch2\u003eMoturo choke cable for Suzuki LT-F 300, LT 230E and LT 250\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo choke cable for your Suzuki Quad LT-F 300, LT 230E and LT 250 (model years 87-02) — a wear part that renders the choke unusable if the original cable snaps. OEM dimensions, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe choke cable operates the choke on the carburetor via the lever on the handlebar, engaging the fuel enrichment mixture for a cold start. The outer casing length and inner cable measurements match the original cable of your Suzuki quad; the ferrules fit into the original mounts on the handlebar control and carburetor housing.\u003c\/p\u003e\n\u003cp\u003eInstallation takes about half an hour with a hex key set, an open-end wrench for the lock nut, and a pair of pliers.\u003c\/p\u003e\n\u003cp\u003eBefore installation, check the handlebar steering range to the left and right; the cable must neither bind nor be under tension. Tighten the clamping screw on the choke according to the LT-F workshop manual.\u003c\/p\u003e\n\u003cp\u003eChoke cable for your Suzuki quad, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eOuter casing length and inner cable measurements match original Suzuki LT-F dimensions\u003c\/li\u003e\n\n\u003cli\u003eFerrules match the original mounts on the handlebar control and carburetor\u003c\/li\u003e\n\n\u003cli\u003eRotating clamping nipples, fully assembled\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal replacement part design, no separate ABE (German operating permit) required. Before ordering, compare the lengths and end-piece shapes with the product image — Suzuki used different mounts for carburetors and handlebars over the model years 1987 to 2002.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; time required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in common sizes\u003c\/li\u003e\n\n\u003cli\u003eOpen-end wrench for the lock nut\u003c\/li\u003e\n\n\u003cli\u003ePliers for loosening the clamping nipples\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × choke cable, complete with outer casing, inner cable, and ferrules. Not included: tools, lubricant.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable fit all LT-F models?\u003c\/strong\u003e\u003cbr\u003eBefore ordering, check the end-piece shape and lengths against the product image. Suzuki used different mounts over the model years 1987 to 2002.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Original replacement part design, no separate ABE required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I lubricate the new cable?\u003c\/strong\u003e\u003cbr\u003eBefore installation, add a drop of multi-purpose grease or cable oil into the casing, then pull it through.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo choke cable for Suzuki Quad LT-F 300, LT 230E and LT 250 (model years 1987 to 2002). Outer casing length and inner cable measurements match the original cable of your Suzuki quad, ready to install. Original replacement part design, no separate ABE.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712862220622,"sku":"6235684","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Chokezug-fuer-Suzuki-LTF-4WDX-LTF-230E-LT.jpg?v=1788885197"},{"product_id":"moturo-6235685","title":"Moturo throttle cable for Yamaha YFM 350X Warrior","description":"\u003ch2\u003eMoturo Throttle Cable for Yamaha YFM 350X Warrior\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo throttle cable for the Yamaha YFM 350X Warrior 93-04 (XM, XN, XP, XR, XS) — after years on sand and trails, this is the wear part that is usually the first to snap. Built to original cable dimensions and ready for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe throttle cable transmits the twist command from the throttle grip to your Warrior's carburetor. The dimensions match the original cable, precisely manufactured and cleanly finished as a replacement for snapped or stretched originals.\u003c\/p\u003e\n\u003cp\u003eInstallation takes about half an hour with a hex key set and open-end wrenches in common sizes.\u003c\/p\u003e\n\u003cp\u003eThrottle cable for the Warrior, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specs\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eDimensions correspond to the original YFM 350X throttle cable\u003c\/li\u003e\n\n\u003cli\u003ePrecisely manufactured, cleanly finished\u003c\/li\u003e\n\n\u003cli\u003eSuitable for model codes XM, XN, XP, XR, XS (model years 2000 to 2004 as well as identical pre-production models)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes – please read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (general operating permit) required. As a wear part, replacement does not need to be registered. Before ordering, please compare cable length and nipple shape with the product image.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHex key set in common sizes\u003c\/li\u003e\n\n\u003cli\u003eOpen-end wrenches for the lock nuts on the carburetor and throttle grip\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cp\u003e1 × Throttle cable. Not included: throttle grip, carburetor, tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable also fit the YFM 350R Raptor?\u003c\/strong\u003e\u003cbr\u003eNo, it has a different cable length and nipple geometry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. Wear part in original spare part design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I check if the length is correct?\u003c\/strong\u003e\u003cbr\u003eCompare the housing length and nipple shape with the old cable and the product image before ordering.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo Throttle Cable for Yamaha YFM 350X Warrior (model years 1993 to 2004), model codes XM, XN, XP, XR, XS. Dimensions correspond to the original throttle cable, ready for installation.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712862286158,"sku":"6235685","price":17.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Gaszug-Seilzug-fuer-Yamaha-YFM-350X-Warr_1.jpg?v=1788885197"},{"product_id":"moturo-6235686","title":"Moturo throttle cable suitable for Honda CB 160 CB 175 CB 200 CB 200T CL 175","description":"\u003ch2\u003eMoturo Throttle Cable for Honda CB 160, 175, 200, 200T and CL 175 (68-76)\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe Moturo throttle cable for your Honda CB 160, CB 175, CB 200, CB 200T and CL 175 (MY 68-76) — a wear part that breaks or snags after years of use. OE number 17910-236-000, ready to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe throttle cable transmits the movement of your twist grip to the carburetor. Dimensions match the original cable, manufactured in OEM quality according to original geometry. The fittings at the twist grip and carburetor cable lever follow the factory specifications of the CB series. Part number 17910-236-000 for CB 160, CB 175, CB 200, CB 200T and CL 175, model years 1968 to 1976.\u003c\/p\u003e\n\u003cp\u003eOn old original cables, the inner wire often snaps after decades, or the outer casing becomes brittle. A clean replacement ensures precise throttle response and prevents a sticking slide.\u003c\/p\u003e\n\u003cp\u003eReplacement takes about half an hour with screwdrivers and an open-ended wrench for the lock nuts.\u003c\/p\u003e\n\u003cp\u003eThrottle cable for Honda CB classics, made by Moturo.\u003c\/p\u003e\n\u003ch3\u003ePerformance · Material · Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eOE number 17910-236-000, manufactured in OEM quality according to original geometry\u003c\/li\u003e\n\n\u003cli\u003eFittings at the twist grip and carburetor lever follow the factory specifications of the CB series\u003c\/li\u003e\n\n\u003cli\u003eDimensions correspond to the original cable\u003c\/li\u003e\n\n\u003cli\u003eFits CB 160, CB 175, CB 200, CB 200T and CL 175, model years 1968 to 1976\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes – Please Read\u003c\/h3\u003e\n\u003cp\u003eOriginal spare part design, no separate ABE (general operating permit) required. As a wear part, replacement does not require registration. Before ordering, compare the connections, lengths, and nipple shape with the product image.\u003c\/p\u003e\n\u003ch3\u003eTools \u0026amp; Time Required\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eScrewdriver set for the tank trim and throttle grip\u003c\/li\u003e\n\n\u003cli\u003eOpen-ended wrench for the lock nuts on the carburetor\u003c\/li\u003e\n\n\u003cli\u003eSome multi-purpose grease for nipples and casing\u003c\/li\u003e\n\n\u003cli\u003eAbout half an hour for an experienced mechanic\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eScope of Delivery\u003c\/h3\u003e\n\u003cp\u003e1 × Throttle cable for Honda CB classics (ready to install). Not included: tools, throttle grip, carburetor, tank trim.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this cable fit the later Honda CB 400?\u003c\/strong\u003e\u003cbr\u003eNo, it has different length and mounting geometry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a TÜV registration?\u003c\/strong\u003e\u003cbr\u003eNo. It is a wear part in the original spare part design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I check if my old cable is still good?\u003c\/strong\u003e\u003cbr\u003eIf the casing cracks, the cable sticks, or the free play at the twist grip exceeds five millimeters, then it is time to replace it.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cspan\u003eMoturo throttle cable for Honda CB 160, CB 175, CB 200, CB 200T and CL 175 (model years 1968 to 1976). OE number 17910-236-000, manufactured in OEM quality according to original geometry, dimensions as original, ready to install.\u003c\/span\u003e\n\n\u003c\/div\u003e","brand":"Moturo","offers":[{"title":"Default Title","offer_id":60712862482766,"sku":"6235686","price":17.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/1205\/3582\/files\/Moturo-Gaszug-fuer-Honda-CB-160-CB-175-CB-200-CB.jpg?v=1788885198"}],"url":"https:\/\/moturo.eu\/en\/collections\/bedienung-zuege-und-griffe.oembed","provider":"MOTURO","version":"1.0","type":"link"}